Skip header and navigation

Refine By

6 records – page 1 of 1.

Everseal anaesthesia mask, paediatric

https://mhc.andornot.com/en/permalink/artifact1928
Dates
1970
1990
circa 1970-1990
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008056
Description
MIE Everseal anaesthesia mask, which consists of a round rubber mount, with an open hole in the centre; the mount is attached to a convex-shaped neoprene-coated rubber body which has edges that turn up inside the mask; there is a yellow rubber manufacturer's label attached to the outside body of th…
  3 images  
Accession Number
997008056
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- rubber
Description
MIE Everseal anaesthesia mask, which consists of a round rubber mount, with an open hole in the centre; the mount is attached to a convex-shaped neoprene-coated rubber body which has edges that turn up inside the mask; there is a yellow rubber manufacturer's label attached to the outside body of the mask.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario, Canada.
Maker
Medical & Industrial Equipment
Site Made (City)
London
Site Made (Country)
England
Dates
1970
1990
circa 1970-1990
Material
rubber: black; yellow
neoprene: black
Inscriptions
The manufacturer's label reads, "MIE // EVERSEAL // NEOPRENE COATED // ANTI-STATIC // REGISTERED DES. // MADE IN ENGLAND"; the mount has raised lettering which reads, "MEDICAL & INDUSTRIAL EQUIPMENT // LONDON ENGLAND"; the top of the outside body has the number "1" stamped on it
Permanent Location
Storage Room 0010
0010-F2-9
Dimension Notes
Length: 8.8 cm. x Width: 8.3 cm. x Depth: 5.6 cm.
Condition Remarks
The mask arrived dirty and dusty; the mount is complete and undamaged and still flexible; the neoprene-coated body is also complete and undamaged and is still flexible; #2 marking at lower outer edge--stuck to glass shelf while on display
Copy Type
Original
Reference Types
Person
Book
Reference Comments
Dr. Ray Matthews; similar to 997.008.055; "Ward's Anaesthetic Equipment", 3rd ed., by Andrew Davey, John T. B. Moyle and Crispian Ward, 1992, pp. 146-147
Exhibit History
On exhibit in Museum gallery - Anaesthesia exhibit, Oct. 2 1997-Nov. 2, 2001; returned to storage Dec. 17, 2001
Images
Less detail

Everseal anaesthesia mask

https://mhc.andornot.com/en/permalink/artifact1958
Dates
1980
1990
circa 1980-1990
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008086
Description
MIE Everseal anaesthesia mask, which consists of a round rubber mount, with an open hole in the centre; the mount is attached to a convex-shaped rubber body which has rounded edges that turn up inside the mask; there are two small yellow rubber manufacturer's labels at the top and bottom outside of…
Accession Number
997008086
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- rubber
Description
MIE Everseal anaesthesia mask, which consists of a round rubber mount, with an open hole in the centre; the mount is attached to a convex-shaped rubber body which has rounded edges that turn up inside the mask; there are two small yellow rubber manufacturer's labels at the top and bottom outside of the body.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario, Canada.
Maker
Medical & Industrial Equipment
Site Made (City)
London
Site Made (Country)
England
Dates
1980
1990
circa 1980-1990
Material
rubber: black; yellow
Inscriptions
Raised letters on the mount read, "MEDICAL & INDUSTRIAL EQUIPMENT // LONDON ENGLAND"; the manufacturer's label at the top reads, "Everseal"; the manufacturer's label at the bottom reads, "ANTISTATIC // MIE // LTD // REGD. DES. No. 868449"
Permanent Location
Storage Room 0010
0010-F2-9
Dimension Notes
Length: 10.6 cm. x Width: 13.0 cm. x Depth: 8.5 cm.
Condition Remarks
The anaesthesia mask arrived dirty and dusty; the rubber has a number of cracks, especially at the bend at the edge; there are no missing sections and the rubber is still flexible; #2 no new damage
Copy Type
Original
Reference Types
Person
Book
Document
Reference Comments
Dr. Ray Matthews; "Ward's Anaesthetic Equipment", 3rd ed., by Andrew Davey, John T.B. Moyle and Crispian S. Ward, 1992, pp. 146-147; manufacturing information from MIE catalogue
Exhibit History
On exhibit in Museum gallery - Anaesthesia exhibit, Oct. 2 1997-Nov. 2, 2001; returned to storage Dec. 17, 2001
Less detail

rebreathing bag

https://mhc.andornot.com/en/permalink/artifact1981
Dates
1940
1960
circa 1940-1960
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008109
Description
Anaesthetic rebreathing bag, which consists of a piece of oval-shaped hollow rubber, tapered at both ends; the bottom end is closed and pointed with a round rubber ring attached to it; the top end is open with a round rubber lip; the bag will inflate and hold air; manufacturing information is stamp…
  1 image  
Accession Number
997008109
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- gas bag
Description
Anaesthetic rebreathing bag, which consists of a piece of oval-shaped hollow rubber, tapered at both ends; the bottom end is closed and pointed with a round rubber ring attached to it; the top end is open with a round rubber lip; the bag will inflate and hold air; manufacturing information is stamped onto the front near the top in yellow lettering.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario.
Maker
Medical & Industrial Equipment
Site Made (Country)
United Kingdom
Dates
1940
1960
circa 1940-1960
Material
rubber: black
Inscriptions
Lettering near the top front reads, "mie // CONDUCTIVE // BS 3353 // ISO 5362 // 2 LITRE // MADE IN // UNITED KINGDOM"; the bottom back reads, "059520"
Permanent Location
Storage Room 0010
0010-F2-2
Dimension Notes
Length: 11.8 cm. x Width: 32.2 cm. x Depth: 2.9 cm.
Condition Remarks
#1 The rubber has small cracks and a small tear at the top where the lip is; the rebreathing bag appears to never have been used and the rubber is very flexible; #2 after being on exhibit, the rubber deteriorated at the connection ring and broke apart; the bag and connection ring are now separated.
Copy Type
Original
Exhibit History
On exhibit in Museum gallery - Anaesthesia exhibit, Oct. 2 1997-Aug. 1999
Images
Less detail

rebreathing bag

https://mhc.andornot.com/en/permalink/artifact1982
Dates
1950
1960
circa 1950-1960
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008110
Description
Anaesthetic rebreathing bag, which consists of a piece of oval-shaped hollow rubber, tapered at both ends; the bottom end is closed and pointed with a round rubber ring attached to it; the top end is open with a round rubber lip; the bag will inflate and hold air; manufacturing information is stamp…
  2 images  
Accession Number
997008110
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- gas bag
Description
Anaesthetic rebreathing bag, which consists of a piece of oval-shaped hollow rubber, tapered at both ends; the bottom end is closed and pointed with a round rubber ring attached to it; the top end is open with a round rubber lip; the bag will inflate and hold air; manufacturing information is stamped onto the front near the top in yellow lettering.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario.
Maker
Medical & Industrial Equipment
Site Made (Country)
United Kingdom
Dates
1950
1960
circa 1950-1960
Material
rubber: black
Inscriptions
Lettering near the top front reads, "mie // CONDUCTIVE // BS 3353 // ISO 5362 // 2 LITRE // MADE IN // UNITED KINGDOM"; the bottom back reads, "019520"
Permanent Location
Storage Room 0010
0010-F2-2
Dimension Notes
Length: 11.9 cm. x Width: 32.8 cm. x Depth: 2.9 cm.
Condition Remarks
The rubber shows very tiny cracks near the top; there are no tears or large cracks and the rubber is very flexible; the rebreathing bag appears never to have been used; #2 mask deteriorated and broke off at the top end while on exhibit
Copy Type
Original
Exhibit History
On exhibit in Museum gallery - Anaesthesia exhibit, Oct. 2 1997-Oct. 24, 2001
Images
Less detail

rebreathing bag

https://mhc.andornot.com/en/permalink/artifact2005
Dates
1995
2000
circa 1995-2000
Collection
Kingston General Hospital Dept. of Anaesthesia Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997023003
Description
Anaesthetic rebreathing bag, which consists of a piece of oval-shaped hollow rubber, tapered at both ends; the bottom and sides are closed and there is a solid cylindrical piece with a rubber ring attached to it at the bottom; the top is open with a round rubber lip; the bag will inflate and hold a…
  1 image  
Accession Number
997023003
Collection
Kingston General Hospital Dept. of Anaesthesia Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
Respiration, Artificial
Description
Anaesthetic rebreathing bag, which consists of a piece of oval-shaped hollow rubber, tapered at both ends; the bottom and sides are closed and there is a solid cylindrical piece with a rubber ring attached to it at the bottom; the top is open with a round rubber lip; the bag will inflate and hold air; manufacturing information is stamped onto the front, near the top, in yellow lettering.
Number Of Parts
1
Provenance
Purchased by and used at the Kingston General Hospital, Kingston, Ontario.
Maker
Medical & Industrial Equipment
Site Made (Country)
United Kingdom
Dates
1995
2000
circa 1995-2000
Date Remarks
Rebreathing was new in 1997
Material
rubber: black
Inscriptions
Lettering stamped onto the outside front, near the top, reads: "MIE // CONDUCTIVE // BS 3353 // ISO 5362 // 2 LITRE // MADE IN // UNITED KINGDOM."; the back near the bottom is stamped, "0595 20"
Permanent Location
Storage Room 0010
0010-F2-2
Dimension Notes
Length: 11.9 cm. x Width: 32.7 cm. x Depth: 3.0 cm.
Condition Remarks
#1 The rebreathing bag is new and has never been used; the rubber has no cracks or stains; #2 after being on exhibit, the rubber deteriorated at the connection ring and broke apart; the bag and the connection ring are now separated
Copy Type
Original
Reference Types
Person
Reference Comments
Dr. Ray Matthews
Research Facts
This rebreathing bag was attached to anaesthesia machine (997.008.009) by Dr. Ray Matthews
Exhibit History
On exhibit in Museum gallery, Anaesthesia exhibit, Oct. 2 1997-Aug. 1999 (removed due to damage)
Images
Less detail
Dates
1950
1970
circa 1950-1970
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
000003374
Description
A stainless steel, scissor-like instrument with "blades" that bow out to form a rough oval shape; where the blades meet, they bend down with the tips flaring out and away from each other.
  2 images  
Accession Number
000003374
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Dilatation -- dilator -- mouth gag
Description
A stainless steel, scissor-like instrument with "blades" that bow out to form a rough oval shape; where the blades meet, they bend down with the tips flaring out and away from each other.
Number Of Parts
1
Provenance
Used at the Kingston Psychiatric Hospital.
Maker
Miltex
Site Made (Country)
Germany
Dates
1950
1970
circa 1950-1970
Material
metal: silver
Inscriptions
On left blade: "STAINLESS // GERMANY" is stamped; on right blade is stamped "MILTEX"; on right handle is stamped "N"
Permanent Location
Storage Room 0010
0010-E3-2
Dimension Notes
Length 12.9 cm x Width 12.5 cm x Depth 3.0 cm
Condition Remarks
Used; hair-like scratches on instrument; no discolouration or corrosion; movable parts move easily; one screw bent.
Copy Type
Original
Reference Types
Book
Reference Comments
"Surgical Instruments", Storz, 1966, p. 239 (similar to item # N-7434)
Research Facts
Used in the OR at KPH during oral surgery.
Images
Less detail

6 records – page 1 of 1.