Skip header and navigation

Refine By

   MORE
   MORE

2160 records – page 1 of 216.

forearm splint, adult

https://mhc.andornot.com/en/permalink/artifact13546
Dates
1955
1965
circa 1955-1965
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopaedic Surgery
Accession Number
997002437
Description
Splint is made up of three sections, a handgrip, curved metal wrist support and perforated arm support all three parts are connected by a metal bar attached by metal rivets; handgrip is adjustable from side to side and is rolled to allow the fingers to fold over it; there are two metal rivets on th…
  4 images  
Accession Number
997002437
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopaedic Surgery
MeSH Heading
Splints
External Fixators
Orthopedic Fixation Devices
Fracture Fixation -- instrumentation
Forearm Injuries
Description
Splint is made up of three sections, a handgrip, curved metal wrist support and perforated arm support all three parts are connected by a metal bar attached by metal rivets; handgrip is adjustable from side to side and is rolled to allow the fingers to fold over it; there are two metal rivets on the top of the handgrip, one at each end; the arm support is perforted with 64 circular holes arranged in vertical rows of eight holes each; arm support can be moulded to fit the forearm; dry yellow residue present on back right hand side
Number Of Parts
1
Provenance
Donated by Dean Barry Smith, Faculty of Medicine, Queen's University
Maker
De Puy Manufacturing Company
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1955
1965
circa 1955-1965
Date Remarks
"Hospital and Physicians Equipment and Supplies," J.F. Hartz Co. Ltd., Toronto, 1960, p.121 (similar to item 6-13A-OEC) (see attached photocopy)
Material
metal: gray
Inscriptions
Stamped on the back left hand side: "DE PUY MFG. CO. // WARSAW. IND."
Permanent Location
Storage Room 0010
0010-E2-16
Dimension Notes
Lenth 27.8 cm x Width 11.1 cm x Depth 8.1 cm
Condition Remarks
Scratches are present all over splint; arm support has been bent at a harsh angle which has created a crease close to the metal bar that joins all three portions of the splint; pitting is present on the back left hand edge; wrist support is in good condition; handgrip exhibits a large amount of corrosion where the fingers would have sat and the metal has turned white and has begun to flake off; handgrip is loose
Copy Type
Original
Reference Types
Internet
JPG
Reference Comments
De Puy Website. April 12, 2011. April 13, 2011.
Research Facts
The DePuy Companies are part of the Johnson & Johnson Family of Companies; Revra DePuy founded DePuy Manufacturing (later to become DePuy Orthopaedics, Inc.) in 1895 in Warsaw, Indiana, on the promise of a fiber splint to replace the wooden barrel staves then used to set fractures; DePuy then becomes the first commercial orthopaedic manufacturer in the world; the Colles splint is generally used for distal-end fractures of the ulna and radius; it can be fitted to the correct angle of flexion by slightly twisting and bending the splint
Exhibit History
On exhibit in the Friend-Vandewater Gallery in Botterell Hall, Queen's University; removed January 27, 2010
Images
Less detail

urethral dilator set

https://mhc.andornot.com/en/permalink/artifact13026
Dates
1920
1960
circa 1920-1960
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Urology
Accession Number
997002441 a-k
Description
Male urethral dilator set consisting of a black leather rectangular case with clasp closure lid (a); brown leather interior holds ten metal dilators, sized on the French scale: 32 (b), 30 (c), 28 (d), 26 (e), 24 (f), 22 (g), 20 (h), 18 (i), 12 (j), 10 (k); dilators have flat ends with rounded sides…
  3 images  
Accession Number
997002441 a-k
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Urology
MeSH Heading
Dilatation
Urology -- instrumentation
Physical Examination
MM= Dilatation -- dilator -- urethral
Description
Male urethral dilator set consisting of a black leather rectangular case with clasp closure lid (a); brown leather interior holds ten metal dilators, sized on the French scale: 32 (b), 30 (c), 28 (d), 26 (e), 24 (f), 22 (g), 20 (h), 18 (i), 12 (j), 10 (k); dilators have flat ends with rounded sides which taper into a cylindrical shape with a rounded end; these ends curve upward
Number Of Parts
11
Part Names
a - case - Size: Length 36.0 cm x Width 14.9 cm x Depth 4.0 cm
b - dilator - Size: Length 27.5 cm x Diam. 1.6 cm
c - dilator - Size: Length 27.5 cm x Diam. 1.0 cm
d - dilator - Size: Length 27.5 cm x Diam. 0.93 cm
e - dilator - Size: Length 27.0 cm x Diam. 0.86 cm
f - dilator - Size: Length 27.0 cm x Diam. 0.8 cm
g - dilator - Size: Length 26.5 cm x Diam. 0.73 cm
h - dilator - Size: Length 26.5 cm x Diam. 0.66 cm
i - dilator - Size: Length 26.5 cm x Diam. 0.4 cm
j - dilator - Size: Length 24.0 cm x Diam. 0.33 cm
k - dilator - Size: Length 24.0 cm x Diam. 0.3 cm
Provenance
Donated by Dean Barry Smith, Faculty of Medicine, Queen's University
Site Made (Country)
United States of America
Dates
1920
1960
circa 1920-1960
Date Remarks
Based on supplier's catalogue
Material
metal: silver
leather: black, brown
Inscriptions
(b) Stamped on end: "AM-S-T-A // 32 // STANDARD"; (c) stamped on end: "A-S-T-A // 30 // STANDARD"; (d) stamped on end: "A-S-T-A // 28 // STANDARD"; (e) stamped on end: "A-S-T-A // 26 // STANDARD"; (f) stamped on end: "A-S-T-A // 24 // STANDARD"; (g) stamped on end: "A-S-T-A // 22 // STANDARD"; (h) stamped on end: "A-S-T-A // 20 // STANDARD"; (i) stamped on end: "A-S-T-A // 18 // STANDARD"; (j) stamped on end: "A-S-T-A // 12 // STANDARD"; (k) stamped on end: "A-S-T-A // 10 // STANDARD"
Permanent Location
Storage Room 0010
0010-E7-14
Condition Remarks
Case is slightly scuffed, especially at corners; leather inside case is faded in parts; two dilators are missing
Copy Type
Original
Reference Types
Person
Document
Book
JPG
Reference Comments
"Kingston General Hospital: A Social and Institutional History", Margaret Angus, 1973, p. 113, 165; "Illustrations of Surgical Instruments of Superior Quality 21st ed", Kny-Scheerer Co, ca. 1915, p. 4056 (similar to model #D/-2744); "Pilling Instruments and Equipment for Surgeons and Hospitals", George P. Pilling & Son, 1932, p. 279 (similar to model #P19372); "Sklar Surgical Instruments, Suction & Pressure Apparatus", Sklar Instruments, 1967, p. 296; CD #8
Research Facts
Label inside case states the object was donated in 1985 by the wife of the late surgeon Dr. W. Stuart Houston; a senior intern at the Kingston General Hospital in 1926, he retired from an Attending position in General Surgery in 1960; he also taught courses at Queen's University
Exhibit History
On exhibit in the Friend-Vandewater Gallery in Botterell Hall, Queen's University; removed January 27, 2010
Images
Less detail

Petit's spiral tourniquet

https://mhc.andornot.com/en/permalink/artifact13028
Dates
1850
1900
circa 1850-1900
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Treatment, General
Accession Number
997002445 a-c
Description
Tourniquet consisting of two brass plates connected by a large screw; red and white chevron patterned woven cotton band with brown, square piece of leather sewn onto end and with a two-pronged square metal end attached; white chamois pad attached to band by a thin brown leather strap.
  1 image  
Accession Number
997002445 a-c
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Treatment, General
MeSH Heading
Tourniquets
Amputation -- instrumentation
First Aid
Description
Tourniquet consisting of two brass plates connected by a large screw; red and white chevron patterned woven cotton band with brown, square piece of leather sewn onto end and with a two-pronged square metal end attached; white chamois pad attached to band by a thin brown leather strap.
Number Of Parts
3
Part Names
a - screw - Size: Length 6.5 cm x Width 4.5 cm x Depth 3.3 cm
b - belt - Size: Length 78.5 cm x Width 2.5 cm x Depth 0.1 cm
c - pad - Size: Length 3.6 cm x Width 2.2 cm x Depth 1.6 cm
Provenance
Donated by Dean Barry Smith, Faculty of Medicine, Queen's University.
Maker
Evans and Wormull
Site Made (City)
London
Site Made (Country)
England
Dates
1850
1900
circa 1850-1900
Material
metal: yellow, silver
fabric: red, white
leather: white, brown
Inscriptions
(a) Stamped on top of screw: "EVANS & CO // 31 STAMFORD ST // LONDON"
Permanent Location
Storage Room 0010
0010-D6-8
Temporary Location
On exhibit “The Century: Medical Innovations of the 1800s” at Museum of Health Care, 25 June 2017.
Condition Remarks
Fabric of belt faded; metal slightly tarnished; leather hardened
Copy Type
Original
Reference Types
Book
Reference Comments
"Antique Medical Instruments", Elisabeth Benion, 1979, p. 315; "Illustrated Catalogue of Surgical Instruments, Appliances, Apparatus, and Utensils, Veterinary Instruments, Cutlery etc.", Evans and Wormull, 1876, pl. 8 (similar to model #13 and #14); "The Tourniquet Manual: Principles and Practice", Leslie Klenerman, 2003, p. 4; "Illustrations of Surgical Instruments of Superior Quality, 21st ed", Kny-Scheerer Co, ca. 1915, p. 2014 (similar to model #B-/445)
Research Facts
Evans and Wormull, formerly Evans and Stevens, first appeared in 1874; they were recognized as suppliers of medical instruments to the British army and navy. Evans & Co. was a surgical instrument maker working in London between 1676-1874.
This style of screw tourniquet was invented by Parisian surgeon Jean Louis Petit in 1718, and his design was used until the early 20th century; he was the first person to use the term 'tourniquet'.
Exhibit History
On exhibit in the Friend-Vandewater Gallery in Botterell Hall, Queen's University; removed January 27, 2010
Images
Less detail

stomach pump and enema apparatus

https://mhc.andornot.com/en/permalink/artifact13056
Dates
1870
1915
circa 1870-1915
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Gastroenterology
Accession Number
997002487 a-n
Description
Fine grade mahoghany case (a) containing combined lever stomach pump and enema apparatus consisting of: case has brass fittings, oval inscription plate (blank) inlaid on top, moulded faded brown velvet-covered interior housing a brass lever pump (b) with decorative maufacturers plate on the barrel…
  3 images  
Accession Number
997002487 a-n
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Gastroenterology
MeSH Heading
Suction
Irrigation
Gastroenterology -- instrumentation
MM= Suction and Drainage -- stomach pump
Description
Fine grade mahoghany case (a) containing combined lever stomach pump and enema apparatus consisting of: case has brass fittings, oval inscription plate (blank) inlaid on top, moulded faded brown velvet-covered interior housing a brass lever pump (b) with decorative maufacturers plate on the barrel, two taps, hand which shuts passage of liquid towards which its point is turned, piston pump with ivory handle, lever and a broken detached spring (m); ebony torque (c); gum elastic stomach tube with rounded tip (d); straight rubber hose tube with brass fittings (e); rubber hose tube with narrowed brass tip (f); ivory conical nozzle (g); ivory hourglass-shaped nozzle (h); ivory cylindrical-shaped nozzle with rounded tip (i); ivory hourglass-shaped nozzle with side attachment (j); metal cylindrical attachment for pump (k); wooden oral screw (l); metal spring (m); metal key for case (n).
Number Of Parts
14
Part Names
a - case - Size: Length 30.3 cm x Width 18.5 cm x Depth 6.2 cm
b - pump - Size: Length 24.3 cm x Width 8.5 cm x Depth 4.1 cm
c - torque - Size: Length 10.2 cm x Width 2.1 cm x Depth 1.1 cm
d - tube with rounded tip (bent) - Size: Length 27.5 cm x Diam. 1.2 cm
e - straight tube - Size: Length 23.9 cm x Diam. 1.5 cm
f - tube with narrowed metal tip (bent) - Size: Length 27.0 cm x Diam. 1.5 cm
g - conical nozzle - Size: Length 6.1 cm x Diam. 2.6 cm
h - hourglass-shaped nozzle - Size: Length 7.6 cm x Diam. 2.6 cm
i - cylindrical nozzle - Size: Length 7.6 cm x Diam. 2.5 cm
j - nozzle with side attachment - Size: Length 6.7 cm x Width 2.9 cm x Depth 1.4 cm
k - metal cylinder - Size: Length 9.0 cm x Diam. 1.9 cm
l - oral screw - Size: Length 8.9 cm x Diam. 2.0 cm
m - spring - Size: Length 5.2 cm x Width 1.2 cm x Depth 2.7 cm
n - key - Size: Length 2.7 cm x Width 1.3 cm x Depth 0.3 cm
Provenance
Donated by Dean Barry Smith, Faculty of Medicine, Queen's University.
Maker
S. Maw Son & Thompson
Site Made (City)
London
Site Made (Country)
England
Dates
1870
1915
circa 1870-1915
Date Remarks
Supplier's catalogue
Material
wood: brown, black
fabric: brown
metal: yellow, silver, black
ivory: cream, yellow
rubber: red, brown, black
Inscriptions
Embossed on brass label (b): "S. MAW & SON & THOMPSON . LONDON * TRADEMARK *"
Permanent Location
Storage Room 0010
0010-E6-13
Condition Remarks
Case has wood split in several areas, preventing lid complete closure; velvet is slightly faded; ivory tools have developed a patina; wax paper covers on rubber hoses is in tatters, little remains; like new
Copy Type
Original
Reference Types
Book
Internet
JPG
Reference Comments
"Analysing the English Collections at the Pitt Rivers Museum"; "Aloe's Illustrated & Priced Catalogue of Superior Surgical Instruments, Physicians; Supplies & Hospital Furnishings," Aloe, A. S. Co.. 6th ed. St. Louis, 189-. pg 330 (model: Lever stomach pump); CD #2
Research Facts
The name MAW has bee associated with a whole range of British made chemists' sundries, dressings, surgical appliances and instruments since the early 17th century. The company grew out of a wholesale druggist company in London, later instrument maker. The company was founded by Hornby & Maw in 1807, was listed as george Maw & Son in 1826, S. Maw & saon in 1860 and S. Maw & Son & Thompson in 1870. In 1901 it was still in Maw hands as S. Maw, Son & Sons with an address of 55 Aldermanbury, London.
Exhibit History
On display in the Friend - Vandewater Gallery in Botterell Hall removed January 27, 2010
Images
Less detail
Dates
1860
1870
circa 1860-1870
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Accession Number
997002505 a-b
Description
Enema apparatus consisting of a brass syringe (b) with manufacturer's mark on the front; rubber tube covered in green, woven silk attached to side of syringe; revolving brass enema pipe at end of tube; resting in a customized velvet-lined varnished wooden case (a) with locking closure lid; key miss…
  5 images  
Accession Number
997002505 a-b
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Description
Enema apparatus consisting of a brass syringe (b) with manufacturer's mark on the front; rubber tube covered in green, woven silk attached to side of syringe; revolving brass enema pipe at end of tube; resting in a customized velvet-lined varnished wooden case (a) with locking closure lid; key missing.
Number Of Parts
2
Part Names
a - case - Size: Length 26.2 cm x Width 10.5 cm x Depth 4.2 cm
b - syringe - Size: Length: 73.0 cm x Diam. 2.4 cm
Provenance
Donated by Dean Barry Smith, Faculty of Medicine, Queen's University.
Maker
S. Maw & Son
Site Made (City)
London
Site Made (Country)
England
Dates
1860
1870
circa 1860-1870
Date Remarks
Date based on company name
Material
wood: brown
fabric: green, yellow, purple
metal: yellow, green
Inscriptions
Stamped on front: "C // MSM // TRADE MARK // S. MAW & SON // 11 ALDERSGATE S // LONDON"
Permanent Location
Storage Room 0010
0010-E6-13
Condition Remarks
Metal corroded at joints and ends; syringe tarnished; fair amount of discolouration on tube; discolouration of velvet inside case; wooden case is cracked along middle of top of lid; varnish missing from bottom of case
Copy Type
Original
Reference Types
Internet
Book
JPG
Reference Comments
Web site, "Pitt Rivers Museum at University of Oxford"; "A Catalogue of Surgeon's Instruments," S. Maw and Sons, 1866, p. 49-51 (similar to figs. 8 and 9); CD #7.
Research Facts
The Maw company was founded in London in 1807, and was still in the hands of the Maw family by 1901; the case is most likely missing a second enema pipe, as the company did make models with smaller pipes for children.
Exhibit History
On exhibit in the Friend-Vandewater Gallery in Botterell Hall, Queen's University; removed January 27, 2010
Images
Less detail

Colles splint, adult

https://mhc.andornot.com/en/permalink/artifact13554
Dates
1955
1965
circa 1955-1965
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
997002507
Description
A moulded right forearm splint of cast metal that resembles the shape of a forearm; the concave arm brace has upturned sides that can be bent and shaped to the human arm and has 40 diamond-shaped cutouts arranged in five vertical lines of eight cutouts each; towards the hand the brace twists slight…
  4 images  
Accession Number
997002507
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Splints
External Fixators
Orthopedic Fixation Devices
Fracture Fixation -- instrumentation
Forearm Injuries
Description
A moulded right forearm splint of cast metal that resembles the shape of a forearm; the concave arm brace has upturned sides that can be bent and shaped to the human arm and has 40 diamond-shaped cutouts arranged in five vertical lines of eight cutouts each; towards the hand the brace twists slightly and narrows before joining with a cast hammer-like handgrip
Number Of Parts
1
Provenance
Donated by Dean Barry Smith, Faculty of Medicine, Queen's University
Maker
Zimmer Manufacturing Company
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1955
1965
circa 1955-1965
Date Remarks
Object is very similar to 997.037.117 and that date comes from a Zimmer catalogue from 1960
Material
metal: gray
Inscriptions
Stamped into metal on the bottom of the splint on the back side: "ZIMMER MFG. CO. // WARSAW [logo with a capital Z inside a diamond shape] IND. U.S.A. // 13 A"
Permanent Location
Storage Room 0010
0010-E2-16
Dimension Notes
Length 30.5 cm x Width 11.3 cm Depth 8.1 cm
Condition Remarks
Overall condition is good; scratches are present all over splint; on the back side the metal near the edges is begining to discolour and wear away; hand grip shows signs of wear and is discoloured
Copy Type
Original
Reference Types
Internet
JPG
Reference Comments
Zimmer Manufacturing Website. January 7, 2009, March 30, 2011.
Research Facts
Justin O. Zimmer began Zimmer Manufacturing Company in Warsaw Indiana in 1927; the Zimmer line of 50 aluminum splints debuts at the American Medical Association meeting in May of 1927 in Washington, D.C. and the Zimmer splint becomes an immediate leader in its field; the colles splint is generally used for distal-end fractures of the ulna and radius; it can be fitted to the correct angle of flexion by slightly twisting and bending; handpiece is contoured to fit the hand
Exhibit History
On exhibit in the Friend-Vandewater Gallery in Botterell Hall Queen's University; removed January 27, 2010
Images
Less detail

Colles Splint, adult

https://mhc.andornot.com/en/permalink/artifact13555
Dates
1955
1965
circa 1955-1965
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
997002508
Description
A moulded right forearm splint of cast metal that resembles the shape of a forearm; the concave arm brace has upturned sides that can be bent and shaped to the human arm and has 28 diamond-shaped cutouts arranged in four vertical lines of seven cutouts each; on the front and back sides there is dry…
  4 images  
Accession Number
997002508
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Splints
External Fixators
Orthopedic Fixation Devices
Fracture Fixation -- instrumentation
Forearm Injuries
Description
A moulded right forearm splint of cast metal that resembles the shape of a forearm; the concave arm brace has upturned sides that can be bent and shaped to the human arm and has 28 diamond-shaped cutouts arranged in four vertical lines of seven cutouts each; on the front and back sides there is dry adhesive residue present; towards the hand the brace twists slightly and narrows before joining with a cast hammer-like handgrip
Number Of Parts
1
Provenance
Donated by Dean Barry Smith, Faculty of Medicine, Queen's University
Maker
Zimmer Manufacturing Company
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1955
1965
circa 1955-1965
Date Remarks
Object is similar to 997.037.117 and the date for that object comes from a Zimmer Catalogue from 1960
Material
metal: gray
Inscriptions
Stamped into metal on bottom of the splint on the back side: "ZIMMER MFG. CO. // WARSAW [logo with a capital Z inside a diamond shape] IND. U.S.A. // 13 C"
Permanent Location
Storage Room 0010
0010-E2-16
Dimension Notes
Length 27.6 cm x Width 10.5 cm x Depth 6.9 cm
Condition Remarks
Metal is scratched and scuffed all over object; adhesive marks are present on the back and front of the object but are no longer tacky; metal is corroding and beginning to pit all over the front; handle is very pitted and discoloured
Copy Type
Original
Reference Types
Internet
JPG
Reference Comments
Zimmer Manufacturing Website. January 7, 2009, March 30, 2011.
Research Facts
Justin O. Zimmer began Zimmer Manufacturing Company in Warsaw Indiana in 1927; the Zimmer line of 50 aluminum splints debuts at the American Medical Association meeting in May of 1927 in Washington, D.C. and the Zimmer splint becomes an immediate leader in its field; the colles splint is generally used for distal-end fractures of the ulna and radius; it can be fitted to the correct angle of flexion by slightly twisting and bending; handpiece is contoured to fit the hand
Exhibit History
On exhibit in the Friend-Vandewater Gallery in Botterell Hall, Queen's University; removed January 27, 2010
Images
Less detail

Colles splint, adult

https://mhc.andornot.com/en/permalink/artifact13556
Dates
1955
1965
circa 1955-1965
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
997002509
Description
A moulded left forearm splint of cast metal that resembles the shape of a forearm; the concave arm brace has upturned sides that can be bent and shaped to the human arm; has 28 diamond-shaped cutouts arranged in four vertical lines of seven cutouts each; towards the hand the splint twists slightly …
  5 images  
Accession Number
997002509
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Splints
External Fixators
Orthopedic Fixation Devices
Fracture Fixation -- instrumentation
Forearm Injuries
Description
A moulded left forearm splint of cast metal that resembles the shape of a forearm; the concave arm brace has upturned sides that can be bent and shaped to the human arm; has 28 diamond-shaped cutouts arranged in four vertical lines of seven cutouts each; towards the hand the splint twists slightly and narrows before joining with a cast hammer-like handgrip
Number Of Parts
1
Provenance
Donated by Dean Barry Smith, Faculty of Medicine, Queen's University
Maker
Zimmer Manufacturing Company
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1955
1965
circa 1955-1965
Date Remarks
Object is similar to 997.037.117 and the date for that object comes from a Zimmer catalogue from 1960
Material
metal: gray
Inscriptions
Stamped into the metal on the bottom of the splint on the back side: "ZIMMER MFG. CO. // WARSAW [logo with a capital Z inside a diamond shape] IND. U.S.A. // 13 D"
Permanent Location
Storage Room 0010
0010-E2-16
Dimension Notes
Length 27.4 cm x Width 9.6 cm x Depth 6 cm
Condition Remarks
Scratches and scuff marks are present all over splint; handgrip is pitted and discoloured; the side that would have been closest to the arm is discoloured and shows signs of wear
Copy Type
Original
Reference Types
Internet
JPG
Reference Comments
Zimmer Manufacturing Website. January 7, 2009, March 30, 2011.
Research Facts
Justin O. Zimmer began Zimmer Manufacturing Company in Warsaw Indiana in 1927; the Zimmer line of 50 aluminum splints debuts at the American Medical Association meeting in May of 1927 in Washington, D.C. and the Zimmer splint becomes an immediate leader in its field; the colles splint is generally used for distal-end fractures of the ulna and radius; it can be fitted to the correct angle of flexion by slightly twisting and bending; handpiece is contoured to fit the hand
Exhibit History
On exhibit in the Friend-Vandewater Gallery in Botterell Hall, Queen's University; removed January 27, 2010
Images
Less detail

dental drill controls

https://mhc.andornot.com/en/permalink/artifact11665
Dates
1957
1970
circa 1957-1970
Collection
Hotel Dieu Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
997010003
Description
Controls for Borden Airotor dental drill consists of vertical rectangular metal carcass supported by base on wheels; carcass has slot for retractable drill bit , metal handle, dial and gage at front and top, hook on side and handle at back which opens panel to interior compartment; interior has mec…
  4 images  
Accession Number
997010003
Collection
Hotel Dieu Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Dental High Speed Equipment
Dentistry
Dental Restoration, Permanent
MM= Dentistry, Operative -- drill
Description
Controls for Borden Airotor dental drill consists of vertical rectangular metal carcass supported by base on wheels; carcass has slot for retractable drill bit , metal handle, dial and gage at front and top, hook on side and handle at back which opens panel to interior compartment; interior has mechanism including plastic and metal tubes, cloth braided cable, two glass jars and plastic bottle; carcass has cables at back; one cable ends in foot-operated pedal and another cable in metal nozzle attachment for external compressor.
Number Of Parts
1
Provenance
Used at Hotel Dieu Hospital in Kingston
Maker
Amalgamated Dental Engineering Industries Ltd.
Site Made (City)
Walton-On-Thames
Site Made (State)
Surrey
Site Made (Country)
England
Dates
1957
1970
circa 1957-1970
Date Remarks
Date based on date of first commercially manufactured and distributed Borden Airotor, style of "Sterling" label indicates c 1950s.
Material
metal: beige, silver, yellow
plastic: grey, black, clear
rubber: black, grey, clear
glass: clear
fabric: black, grey
liquid: yellow
Inscriptions
Embossed on nameplate affixed to carcass: "Sterling"; printed on metal plate: "STERLING CONTROLS // FOR // BORDEN AIROTOR // AN "AMALGAMATED DENTAL" PRODUCT // TYPE 4 // SERIAL NO 2477".
Permanent Location
Storage Room W1
W1-4-2
Dimension Notes
Length 99.0 cm x Width 32.0 cm x Depth 27.0 cm
Condition Remarks
Paint wearing off carcass; minor scratching on sides; organic residue on base and in slot; rubber edging is cracked and detaching from carcass at top; interior walls of carcass stained and rusting; rubber ring stiff; plastic bottle stained; glass jar showing fracture lines; cloth braided cable is frayed and cut at one end; cable to pedal is beginning to pulverize; rubber on pedal is torn.
Copy Type
Original
Reference Types
Internet
JPG
Reference Comments
Wikipedia; CD #6
Research Facts
Used as controls for Borden Airotor dental drill
Images
Less detail

dental sterilizer

https://mhc.andornot.com/en/permalink/artifact11695
Dates
1940
1950
circa 1940-1950
Collection
Hotel Dieu Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
997010004 a-h
Description
Ritter dental sterilizer consisting of vertical metal (a) carcass with a door opening to interior at front and pedal at base which opens inbuilt autoclave at top; autoclave contains perforated metal (b) tray with handles; carcass has two dials and a spout at front and electrical cable and plug at b…
  3 images  
Accession Number
997010004 a-h
Collection
Hotel Dieu Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Dental Care -- instrumentation
Sterilization -- instrumentation
Dental Equipment
Description
Ritter dental sterilizer consisting of vertical metal (a) carcass with a door opening to interior at front and pedal at base which opens inbuilt autoclave at top; autoclave contains perforated metal (b) tray with handles; carcass has two dials and a spout at front and electrical cable and plug at back; interior of carcass contains (c) shelf, (d-e) two small bulbs in (g) packet for pill storage and instructional (f) tag on string; sterilizer has a (h) removable back panel which provides access to mechanical compartment.
Number Of Parts
8
Part Names
a - carcass - Size: Length 95.0cm x Width 48.3cm x Depth 41.0
b - tray - Size: Length 33.0cm x Width 12.0cm x Depth 2.5cm
c - shelf - Size: Length 39.0cm x Width 33.0cm x Depth 1.4cm
d -e - bulbs - Size: Length 4.5cm x Diam. 2.0 cm
f - tag on string - Size: Length 7.0 cm x Width 4.3 cm
g - packet - Size: Length 9.0 cm x Width 5.8 cm
h - back panel - Size: Length 36.0 cm x Width 19.5 cm x Depth 0.8 cm
Provenance
Used at Hotel Dieu Hospital in Kingston
Maker
Ritter Company Inc.
Site Made (City)
Rochester
Site Made (State)
New York
Site Made (Country)
United States of America
Dates
1940
1950
circa 1940-1950
Date Remarks
Date appears on Ritter Dental Company website
Material
metal: tan, black, silver, cream, yellow
plastic: black, silver, yellow
fabric: black, cream
paper: cream
ceramic: white
glass: transparent
Inscriptions
Printed on metal plate affixed to carcass; "Ritter Sterilizer // MANUFACTURED BY // Ritter Company, Inc. // Rochester, N.Y. // CURRENT A.C. VOLTS 115 WATTS 1230 MODEL-TYPE E 1 SERIAL NO. 20E133 // MADE IN UNITED STATES OF AMERICA". Handwritten in chalk on interior mechanical compartment; "1918 G1". Embossed on front of carcass; "RITTER".
Permanent Location
Storage Room W1
W1-4-2
Condition Remarks
Carcass is scratched with large sections of paint chipped and exposing rusty metal; inbuilt autoclave and tray are scratched, tarnished and interior is covered in chalky residue; autoclave lid has residue from duct tape; interior of carcass has minor stains; cloth-braided cords are frayed and plastic tubing broken inside mechanical compartment; instructional tag is stained; paper packet with bulbs is stained.
Copy Type
Original
Reference Types
Internet
JPG
Reference Comments
"The Golden Years 1920-1959", The Ritter Dental Company website, page 5, 1940's Ritter Model D Sterilizer; copy in donor file; CD #5; CD #6.
Research Facts
Used to sterilize dental instruments.
Images
Less detail

2160 records – page 1 of 216.