Skip header and navigation

Refine By

   MORE

23 records – page 1 of 3.

The Alchymist [print]

https://mhc.andornot.com/en/permalink/artifact9142
Collection
University Health Network - Academy of Medicine Collection
Category
Archival Items
Classification
Archival, Images
Accession Number
002050174
Description
Black and white print on paper, depicts an older bearded man, wearing dark-coloured robes and a hat, sitting in front of a stove and blowing air onto the embers.
  2 images  
Accession Number
002050174
Author
Wm. Baillie
Collection
University Health Network - Academy of Medicine Collection
Category
Archival Items
Classification
Archival, Images
MeSH Heading
Art
Alchemy -- pictorial works
Description
Black and white print on paper, depicts an older bearded man, wearing dark-coloured robes and a hat, sitting in front of a stove and blowing air onto the embers.
Number Of Parts
1
Provenance
Acquired from the Academy of Medicine; source: Dr. John Ferguson.
Maker
Wm. Baillie
Material
paper: cream
ink: black
Inscriptions
Printed on the front: "Teniers Pinx.t He's in Belief of Chymistry, so bold, The Alcymist, if his Dream last, he'll turn the Age to Gold. Wbaillie Sculp."; handwritten on the back : "presented by // John Ferguson Esq M.D // 1917".
Permanent Location
Storage Room 2005
2005-5-7 Binder A, p. 11b
Dimension Notes
Length 20.2 cm x Width 24.2 cm
Condition Remarks
#1: Stable: Paper looks in good condition, slight darkening in thte lower right corner; the backing paper however has darkened noticeably, especially around the edges, there are losses at both lower corners and in the upper right corner, there are also small losses on each edge; the back is very soiled, there are darkened uniform adhesive lines showing through the backing card.
Copy Type
Original
Reference Types
File
Other
JPG
Reference Comments
Prev. #AMP273; L203; CD #UHN
Research Facts
Etched from a painting by Teniers; date accepted by the Academy of Medicine: 1917.
Images
Less detail

anaesthetic inhaler

https://mhc.andornot.com/en/permalink/artifact3466
Dates
1902
circa 1902
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997001194 a-b
Description
Ethyl-chlorid anaesthetic inhaler, which consists of (a) a hollow cylindrical canister with a closed, rounded bottom and a rounded top; the top of the canister has an attached hollow cylindrical tube that has a small round open hole at the top with threading on its inner edges; there is a side holl…
  1 image  
Accession Number
997001194 a-b
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Administration, Intranasal -- instrumentation
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- inhaler
Description
Ethyl-chlorid anaesthetic inhaler, which consists of (a) a hollow cylindrical canister with a closed, rounded bottom and a rounded top; the top of the canister has an attached hollow cylindrical tube that has a small round open hole at the top with threading on its inner edges; there is a side hollow cylindrical tube off from the central tube; the side tube ends with a hollow, bulbous glass attachment with a very narrow cylindrical glass tube at its end; this glass tube has a pinhole opening at the end; a gauge pin (b) fits into the top of the central metal tube; the gauge pin is made of round flat metal with a solid cylindrical piece attached to the bottom; the cylindrical piece has threading on its outer edges.
Number Of Parts
2
Part Names
a - anaesthetic inhaler - Size: Length 14.1 cm x Width 4.1 cm x Depth 1.5 cm
b - gauge pin - Size: Length 2.3 cm x Diam. 1.5 cm
Provenance
Collected by Dr. A.A. Travill for the Queen's University Faculty of Medicine Collection
Maker
The G E Bauer Chemical Co.
Site Made (City)
Cleveland
Site Made (State)
Ohio
Site Made (Country)
United States of America
Dates
1902
circa 1902
Date Remarks
Pat. Feb. 1901, Oct. 1902
Material
metal: silver
glass: clear
Inscriptions
(a) The words, "G E BAUER'S ETHYL-CHLORID C.P. // THE G E BAUER CHEM. CO. CLEVELAND // PAT. FEB 1901, OCT. 1902" are stamped into the metal of the outside edge of the cannister
Permanent Location
Storage Room 0010
0010-F2-2
Condition Remarks
The metal shows minor wear; no staining or corrosion is visible; the glass is complete with no damage
Copy Type
Original
Reference Types
Document
JPG
Reference Comments
Previous number #285; Faculty of Medicine Collection 1984 Inventory; CD #5
Images
Less detail

anaesthetic inhaler

https://mhc.andornot.com/en/permalink/artifact13482
Dates
1910
1940
circa 1910-1940
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
010020361 a-b
Description
Silver metal anaesthetic inhaler mask; wire mesh mask with rounded solid metal border (a); cylindrical piece of metal in an oval, covered with coiled spring (b); forms loop at top; spring fits into border of mask
  3 images  
Accession Number
010020361 a-b
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Administration, Intranasal -- instrumentation
Anesthesiology, instrumentation
Anesthesia, Dental
MM= Anesthesia, Inhalation -- inhaler/mask -- inhaler
Description
Silver metal anaesthetic inhaler mask; wire mesh mask with rounded solid metal border (a); cylindrical piece of metal in an oval, covered with coiled spring (b); forms loop at top; spring fits into border of mask
Number Of Parts
2
Part Names
a - mask - Size: Length 11.7 cm x Width 8.1 cm x Depth 5.0 cm
b - spring - Size: Length 14.2 cm x Width 7.4 cm x Depth 1.1 cm
Provenance
Transfer from the Dental Canada Fund; previously housed in the Dentistry Canada Museum (Ottawa)
Site Made (Country)
Germany
Dates
1910
1940
circa 1910-1940
Date Remarks
Based on supplier's catalogue
Material
metal: silver
Inscriptions
(a) Engraved on handle: "U // S // H // GERMANY // CHROME"
Permanent Location
Storage Room 0010
0010-F2-8 Row E
Condition Remarks
Wire mesh partly detached from solid metal ring
Copy Type
Original
Reference Types
Book
Reference Comments
"Illustrated Catalog of a Complete Line of Standard Surgical Instruments", Codman & Shurtleff, 1920, p. 25 (similar to model #1309); "Illustrations of Surgical Instruments of Superior Quality", Kny-Scheerer Co., ca. 1915, p. 2008 (similar to model #B/-168)
Research Facts
Dr Ralph and Mrs Olga Crawford donated their extensive Canadian dental collection to the DCF to create the museum in 1997; further donations were received while Dr Crawford was Curator Emeritus at the Dental Canada Museum until its closure in 2008; this item was donated by Dr. Norman Ironstone from Ottawa, Ontario; this most resembles a Yankauer's chloroform mask; it would be used with a piece of fabric in between the spring and the mask, which would be infused with the anaesthetic
Images
Less detail

anaesthetic inhaler

https://mhc.andornot.com/en/permalink/artifact13483
Dates
1910
1940
circa 1910-1940
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
010020362 a-c
Description
Silver metal anaesthetic inhaler mask; wire mesh mask with rounded solid metal border (a); cylindrical piece of metal in an oval, covered with coiled spring (b); forms loop at top; spring fits into border of mask; white fabric mesh cover (c) goes around mask, held in place by spring
  3 images  
Accession Number
010020362 a-c
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Administration, Intranasal -- instrumentation
Anesthesiology, instrumentation
Anesthesia, Dental
MM= Anesthesia, Inhalation -- inhaler/mask -- inhaler
Description
Silver metal anaesthetic inhaler mask; wire mesh mask with rounded solid metal border (a); cylindrical piece of metal in an oval, covered with coiled spring (b); forms loop at top; spring fits into border of mask; white fabric mesh cover (c) goes around mask, held in place by spring
Number Of Parts
3
Part Names
a - mask - Size: Length 11.6 cm x Width 7.7 cm x Depth 5.5 cm
b - spring - Size: Length 13.3 cm x Width 7.2 cm x Depth 4.3 cm
c - fabric - Size: Length 12.1 cm x Width 9.8 cm x Depth 5.0 cm
Provenance
Transfer from the Dental Canada Fund; previously housed in the Dentistry Canada Museum (Ottawa)
Maker
Sklar
Site Made (City)
Long Island
Site Made (State)
New York
Site Made (Country)
United States of America
Dates
1910
1940
circa 1910-1940
Date Remarks
Based on supplier's catalogue
Material
metal: silver
fabric: white
Inscriptions
(a) Engraved on handle: "EU.S.A. // Sklar"
Permanent Location
Storage Room 0010
0010-F2-8 Row B
Condition Remarks
Fabric (c) is worn; metal slightly tarnished
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"Illustrated Catalog of a Complete Line of Standard Surgical Instruments", Codman & Shurtleff, 1920, p. 25 (similar to model # 1309); "Illustrations of Surgical Instruments of Superior Quality", Kny-Scheerer Co., ca. 1915, p. 2008 (similar to model #B/-168); "The Finest Instruments Ever Made", Audrey B. Davis and Mark S. Dreyfuss, 1986, p. 296
CD #1
Research Facts
Dr Ralph and Mrs Olga Crawford donated their extensive Canadian dental collection to the DCF to create the museum in 1997; further donations were received while Dr Crawford was Curator Emeritus at the Dental Canada Museum until its closure in 2008; this item was donated by Dr. Ralph Crawford from Winnipeg, Manitoba; this most resembles a Yankauer's chloroform mask; the fabric would be infused with the anaesthetic; Sklar was established in 1892
Images
Less detail
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Treatment, General
Accession Number
997001392 a-b
Description
Atomizer bottle (a) in a cardboard box (b); the atomizer bottle is glass and is narrow, cylindrical and hollow, with a flat, closed, round bottom; there is an outwardly rounded ridge in the glass, just below the neck; the neck tapers in and ends with a rounded open top; the neck is covered with a m…
  3 images  
Accession Number
997001392 a-b
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Treatment, General
MeSH Heading
Administration, Intranasal -- instrumentation
Respiratory Therapy
MM= Administration Drug, Inhalation
MM= Nebulizers and Vaporizers -- atomizer
Description
Atomizer bottle (a) in a cardboard box (b); the atomizer bottle is glass and is narrow, cylindrical and hollow, with a flat, closed, round bottom; there is an outwardly rounded ridge in the glass, just below the neck; the neck tapers in and ends with a rounded open top; the neck is covered with a metal cap--also with a round, open hole in the centre and threading on its inner edges; the bottle is stored in a 6-sided cardboard box that has flaps at the top and bottom; all sides of the box are flat and the outer edges have printing on them.
Number Of Parts
2
Part Names
a - atomizer bottle - Size: Length 11.0 x Diam. 3.3 cm
b - cardboard box - Size: Length 18.4 cm x Width 4.5 cm x Depth 4.5 cm
Provenance
Originally owned and used by Dr. F.X. O'Connor; donated by Miss Helen Cobb; collected by Dr. A.A. Travill for the Queen's University Faculty of Medicine Collection
Maker
The De Vilbiss Company
Site Made (City)
Toledo
Site Made (State)
Ohio
Site Made (Country)
United States of America
Material
metal: silver
glass: clear
cardboard: light green; cream; black
Inscriptions
(a) None; (b) the front and back of the box both read, "The // De Vilbiss // Company // TOLEDO // OHIO // MADE IN U.S.A."; the bottom of the box reads, "PRINTED IN U.S.A. // NO. 150 QB // CLEAR"
Permanent Location
Storage Room 0010
0010-E3-13
Condition Remarks
(a) The bottle appears to be unused; no stains, chips or scratches are visible in the glass; the metal is undamaged and shows no corrosion; (b) the cardboard box shows some wear; the top flap is partially missing; all printing is fully legible.
Copy Type
Original
Reference Types
Document
Book
JPG
Reference Comments
Previous number #713; Faculty of Medicine Collection 1984 Inventory; "Instruments and Equipment for Surgeons and Hospitals" by The Geo. P. Pilling & Son Company, 1932, p. 140 (very similar to item #P6808) (see attached photocopy); CD #5
Images
Less detail
Dates
1940
circa 1940
Collection
Dr. C. M. Bracken Collection
Category
Diagnostic & Treatment Artifacts
Classification
Treatment, General
Accession Number
993004030 a-b
Description
Molded clear glass bottle screws into metal apparatus to create atomizer for spray medicine; rubber bulb is missing.
  1 image  
Accession Number
993004030 a-b
Collection
Dr. C. M. Bracken Collection
Category
Diagnostic & Treatment Artifacts
Classification
Treatment, General
MeSH Heading
Administration, Intranasal -- instrumentation
Respiratory Therapy
MM= Administration Drug, Inhalation
MM= Nebulizers and Vaporizers -- atomizer
Description
Molded clear glass bottle screws into metal apparatus to create atomizer for spray medicine; rubber bulb is missing.
Number Of Parts
2
Part Names
a - glass bottle - Size: Length 5.4 cm. x Diam. 5.0 cm.
b - metal spray - Size: Length 14.2 cm. x Width 6.0 cm. x Depth 2.0 cm.
Provenance
Belonged to Dr. C.M. Bracken
Dates
1940
circa 1940
Date Remarks
Valuator Dr. J.R. Scott
Material
glass: clear
metal: silver
Inscriptions
Raised design on bottome of glass bottle: F // (letter W above the letter T enclosed in an
inverted triangle): see drawing on accession sheet
Permanent Location
Storage Room 0010
0010-F2-6
Condition Remarks
small residue in glass requires brush to clean; #2: metal lid inside tarnished
Reference Types
JPG
Reference Comments
CD #1
Images
Less detail
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Treatment, General
Accession Number
1962.1.7
Description
Chrome-plated atomizer with a wooden handle.
  1 image  
Accession Number
1962.1.7
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Treatment, General
MeSH Heading
Administration, Intranasal -- instrumentation
Respiratory Therapy
MM= Administration Drug, Inhalation
MM= Nebulizers and Vaporizers -- atomizer
Description
Chrome-plated atomizer with a wooden handle.
Number Of Parts
1
Provenance
Acquired from the Academy of Medicine; donated by Dr. H.A.S. Vokes.
Material
metal: silver
wood: dark brown
paraffin
Permanent Location
Storage Room 0010
0010-E3-13
Dimension Notes
Depth 10.0 cm x Diam. 5.1 cm
Condition Remarks
Chrome plating has worn off in many places; black discolouration has taken place; paint has worn off wooden handle; signs of mould on the paraffin inside; #2: something black, moist, and tar-like inside.
Copy Type
Original
Reference Types
JPG
Reference Comments
CD #UHN
Images
Less detail
Dates
1800
1899
1800-1899
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Treatment, General
Accession Number
1980.18.112
Description
Atomizer, consisting of a rubber bulb attached to a metal rod and a rubber siphon.
  1 image  
Accession Number
1980.18.112
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Treatment, General
MeSH Heading
Administration, Intranasal -- instrumentation
Respiratory Therapy
MM= Administration Drug, Inhalation
MM= Nebulizers and Vaporizers -- atomizer
Description
Atomizer, consisting of a rubber bulb attached to a metal rod and a rubber siphon.
Number Of Parts
1
Provenance
Acquired from the Academy of Medicine; source: Mr. Dean Charters.
Dates
1800
1899
1800-1899
Date Remarks
Original record had "19c."
Material
rubber: black; yellow
metal: silver
Permanent Location
Storage Room 0010
0010-E3-13
Dimension Notes
Length 11.5 cm
Copy Type
Original
Images
Less detail

Bennett's inhaler

https://mhc.andornot.com/en/permalink/artifact3298
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997001116 a-d
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (…
  1 image  
Accession Number
997001116 a-d
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Administration, Intranasal -- instrumentation
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- inhaler
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (c,d) fit onto and over the ends of the tubes; the tips are both conical in shape with a hollow centre
Number Of Parts
4
Part Names
a - inhaler - Size: Length 13.4 cm x Width 2.9 cm x Depth 2.0 cm
b - cap - Size: Length 1.8 cm x Diam. 2.3 cm
c - tip - Size: Length 1.5 cm x Diam. 1.5 cm
d - tip - Size: Length 1.5 cm x Diam. 1.5 cm
Provenance
Originally owned by Dr. F.J. O'Connor; collected by Dr. A.A. Travill for the Queen's University Faculty of Medicine Collection
Maker
The J.F. Hartz Co.
Site Made (City)
Toronto
Site Made (State)
Ontario
Site Made (Country)
Canada
Material
metal: silver
plastic: black
Inscriptions
(a) The outside of the cannister has the words, "HARTZ CO. // DETROIT - CLEVELAND // TORONTO // PAT. APPL'D FOR" stamped into the metal
Permanent Location
Storage Room 0010
0010-F2-1
Condition Remarks
The metal shows wear, but no corrosion is visible; the bakelite tips are complete and undamaged; #2: returned in same condition.
Copy Type
Original
Reference Types
Book
Document
Other
JPG
Reference Comments
Previous number #182; Faculty of Medicine Collection 1984 Inventory; "Surgical Instruments," The Kny-Scheerer Co., 1915, p. 2001 (item B/-22) (see attached photocopy); "Illustrated Catalog of A Complete Line of Standard Surgical Instruments," by Codman & Shurtleff Inc., c. 1920, p. 23 (item 1253) (see attached photocopy); also see 997.001.117 and .118; CD #3
Exhibit History
May 24 - Sept. 13, 2001: Agnes Etherington Art Centre Museopathy exhibit; Bracken Library Exhibit "Boning Up on Anatomy"; Sept 9, 2002-Sept. 29, 2003
Images
Less detail

Bennett's inhaler

https://mhc.andornot.com/en/permalink/artifact3299
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997001117 a-d
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (…
  1 image  
Accession Number
997001117 a-d
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Administration, Intranasal -- instrumentation
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- inhaler
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (c,d) fit onto and over the ends of the tubes; the tips are both conical in shape with a hollow centre
Number Of Parts
4
Part Names
a - inhaler - Size: Length 13.4 cm x Width 2.8 cm x Depth 2.0 cm
b - cap - Size: Length 1.8 cm x Diam. 2.3 cm
c - tip - Size: Length 1.5 cm x Diam. 1.5 cm
d - tip - Size: Length 1.5 cm x Diam. 1.5 cm
Provenance
Originally owned by Dr. H.C. Mabee; collected by Dr. A.A. Travill for the Queen's University Faculty of Medicine Collection
Maker
The J.F. Hartz Co.
Site Made (City)
Toronto
Site Made (State)
Ontario
Site Made (Country)
Canada
Material
metal: silver
plastic: black
Inscriptions
(a) The outside of the cannister has the words, "HARTZ CO. // DETROIT - CLEVELAND // TORONTO // PAT. APPL'D FOR" stamped into the metal
Permanent Location
Storage Room 0010
0010-F2-1
Condition Remarks
The metal shows wear, but no corrosion is visible; the bakelite tips are complete and undamaged, except for a very small chip missing from the outer tip edge of (a)
Copy Type
Original
Reference Types
Book
Document
Other
JPG
Reference Comments
Previous number #183; Faculty of Medicine Collection 1984 Inventory; "Surgical Instruments," The Kny-Scheerer Co., 1915, p. 2001 (item B/-22) (see attached photocopy); "Illustrated Catalog of A Complete Line of Standard Surgical Instruments," by Codman & Shurtleff Inc., c. 1920, p. 23 (item 1253) (see attached photocopy); also see 997.001.116 and .118; CD #3
Images
Less detail

23 records – page 1 of 3.