Skip header and navigation

Refine By

   MORE
   MORE

1138 records – page 1 of 114.

forearm splint, adult

https://mhc.andornot.com/en/permalink/artifact13546
Dates
1955
1965
circa 1955-1965
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopaedic Surgery
Accession Number
997002437
Description
Splint is made up of three sections, a handgrip, curved metal wrist support and perforated arm support all three parts are connected by a metal bar attached by metal rivets; handgrip is adjustable from side to side and is rolled to allow the fingers to fold over it; there are two metal rivets on th…
  4 images  
Accession Number
997002437
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopaedic Surgery
MeSH Heading
Splints
External Fixators
Orthopedic Fixation Devices
Fracture Fixation -- instrumentation
Forearm Injuries
Description
Splint is made up of three sections, a handgrip, curved metal wrist support and perforated arm support all three parts are connected by a metal bar attached by metal rivets; handgrip is adjustable from side to side and is rolled to allow the fingers to fold over it; there are two metal rivets on the top of the handgrip, one at each end; the arm support is perforted with 64 circular holes arranged in vertical rows of eight holes each; arm support can be moulded to fit the forearm; dry yellow residue present on back right hand side
Number Of Parts
1
Provenance
Donated by Dean Barry Smith, Faculty of Medicine, Queen's University
Maker
De Puy Manufacturing Company
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1955
1965
circa 1955-1965
Date Remarks
"Hospital and Physicians Equipment and Supplies," J.F. Hartz Co. Ltd., Toronto, 1960, p.121 (similar to item 6-13A-OEC) (see attached photocopy)
Material
metal: gray
Inscriptions
Stamped on the back left hand side: "DE PUY MFG. CO. // WARSAW. IND."
Permanent Location
Storage Room 0010
0010-E2-16
Dimension Notes
Lenth 27.8 cm x Width 11.1 cm x Depth 8.1 cm
Condition Remarks
Scratches are present all over splint; arm support has been bent at a harsh angle which has created a crease close to the metal bar that joins all three portions of the splint; pitting is present on the back left hand edge; wrist support is in good condition; handgrip exhibits a large amount of corrosion where the fingers would have sat and the metal has turned white and has begun to flake off; handgrip is loose
Copy Type
Original
Reference Types
Internet
JPG
Reference Comments
De Puy Website. April 12, 2011. April 13, 2011.
Research Facts
The DePuy Companies are part of the Johnson & Johnson Family of Companies; Revra DePuy founded DePuy Manufacturing (later to become DePuy Orthopaedics, Inc.) in 1895 in Warsaw, Indiana, on the promise of a fiber splint to replace the wooden barrel staves then used to set fractures; DePuy then becomes the first commercial orthopaedic manufacturer in the world; the Colles splint is generally used for distal-end fractures of the ulna and radius; it can be fitted to the correct angle of flexion by slightly twisting and bending the splint
Exhibit History
On exhibit in the Friend-Vandewater Gallery in Botterell Hall, Queen's University; removed January 27, 2010
Images
Less detail

urethral dilator set

https://mhc.andornot.com/en/permalink/artifact13026
Dates
1920
1960
circa 1920-1960
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Urology
Accession Number
997002441 a-k
Description
Male urethral dilator set consisting of a black leather rectangular case with clasp closure lid (a); brown leather interior holds ten metal dilators, sized on the French scale: 32 (b), 30 (c), 28 (d), 26 (e), 24 (f), 22 (g), 20 (h), 18 (i), 12 (j), 10 (k); dilators have flat ends with rounded sides…
  3 images  
Accession Number
997002441 a-k
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Urology
MeSH Heading
Dilatation
Urology -- instrumentation
Physical Examination
MM= Dilatation -- dilator -- urethral
Description
Male urethral dilator set consisting of a black leather rectangular case with clasp closure lid (a); brown leather interior holds ten metal dilators, sized on the French scale: 32 (b), 30 (c), 28 (d), 26 (e), 24 (f), 22 (g), 20 (h), 18 (i), 12 (j), 10 (k); dilators have flat ends with rounded sides which taper into a cylindrical shape with a rounded end; these ends curve upward
Number Of Parts
11
Part Names
a - case - Size: Length 36.0 cm x Width 14.9 cm x Depth 4.0 cm
b - dilator - Size: Length 27.5 cm x Diam. 1.6 cm
c - dilator - Size: Length 27.5 cm x Diam. 1.0 cm
d - dilator - Size: Length 27.5 cm x Diam. 0.93 cm
e - dilator - Size: Length 27.0 cm x Diam. 0.86 cm
f - dilator - Size: Length 27.0 cm x Diam. 0.8 cm
g - dilator - Size: Length 26.5 cm x Diam. 0.73 cm
h - dilator - Size: Length 26.5 cm x Diam. 0.66 cm
i - dilator - Size: Length 26.5 cm x Diam. 0.4 cm
j - dilator - Size: Length 24.0 cm x Diam. 0.33 cm
k - dilator - Size: Length 24.0 cm x Diam. 0.3 cm
Provenance
Donated by Dean Barry Smith, Faculty of Medicine, Queen's University
Site Made (Country)
United States of America
Dates
1920
1960
circa 1920-1960
Date Remarks
Based on supplier's catalogue
Material
metal: silver
leather: black, brown
Inscriptions
(b) Stamped on end: "AM-S-T-A // 32 // STANDARD"; (c) stamped on end: "A-S-T-A // 30 // STANDARD"; (d) stamped on end: "A-S-T-A // 28 // STANDARD"; (e) stamped on end: "A-S-T-A // 26 // STANDARD"; (f) stamped on end: "A-S-T-A // 24 // STANDARD"; (g) stamped on end: "A-S-T-A // 22 // STANDARD"; (h) stamped on end: "A-S-T-A // 20 // STANDARD"; (i) stamped on end: "A-S-T-A // 18 // STANDARD"; (j) stamped on end: "A-S-T-A // 12 // STANDARD"; (k) stamped on end: "A-S-T-A // 10 // STANDARD"
Permanent Location
Storage Room 0010
0010-E7-14
Condition Remarks
Case is slightly scuffed, especially at corners; leather inside case is faded in parts; two dilators are missing
Copy Type
Original
Reference Types
Person
Document
Book
JPG
Reference Comments
"Kingston General Hospital: A Social and Institutional History", Margaret Angus, 1973, p. 113, 165; "Illustrations of Surgical Instruments of Superior Quality 21st ed", Kny-Scheerer Co, ca. 1915, p. 4056 (similar to model #D/-2744); "Pilling Instruments and Equipment for Surgeons and Hospitals", George P. Pilling & Son, 1932, p. 279 (similar to model #P19372); "Sklar Surgical Instruments, Suction & Pressure Apparatus", Sklar Instruments, 1967, p. 296; CD #8
Research Facts
Label inside case states the object was donated in 1985 by the wife of the late surgeon Dr. W. Stuart Houston; a senior intern at the Kingston General Hospital in 1926, he retired from an Attending position in General Surgery in 1960; he also taught courses at Queen's University
Exhibit History
On exhibit in the Friend-Vandewater Gallery in Botterell Hall, Queen's University; removed January 27, 2010
Images
Less detail

Colles splint, adult

https://mhc.andornot.com/en/permalink/artifact13554
Dates
1955
1965
circa 1955-1965
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
997002507
Description
A moulded right forearm splint of cast metal that resembles the shape of a forearm; the concave arm brace has upturned sides that can be bent and shaped to the human arm and has 40 diamond-shaped cutouts arranged in five vertical lines of eight cutouts each; towards the hand the brace twists slight…
  4 images  
Accession Number
997002507
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Splints
External Fixators
Orthopedic Fixation Devices
Fracture Fixation -- instrumentation
Forearm Injuries
Description
A moulded right forearm splint of cast metal that resembles the shape of a forearm; the concave arm brace has upturned sides that can be bent and shaped to the human arm and has 40 diamond-shaped cutouts arranged in five vertical lines of eight cutouts each; towards the hand the brace twists slightly and narrows before joining with a cast hammer-like handgrip
Number Of Parts
1
Provenance
Donated by Dean Barry Smith, Faculty of Medicine, Queen's University
Maker
Zimmer Manufacturing Company
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1955
1965
circa 1955-1965
Date Remarks
Object is very similar to 997.037.117 and that date comes from a Zimmer catalogue from 1960
Material
metal: gray
Inscriptions
Stamped into metal on the bottom of the splint on the back side: "ZIMMER MFG. CO. // WARSAW [logo with a capital Z inside a diamond shape] IND. U.S.A. // 13 A"
Permanent Location
Storage Room 0010
0010-E2-16
Dimension Notes
Length 30.5 cm x Width 11.3 cm Depth 8.1 cm
Condition Remarks
Overall condition is good; scratches are present all over splint; on the back side the metal near the edges is begining to discolour and wear away; hand grip shows signs of wear and is discoloured
Copy Type
Original
Reference Types
Internet
JPG
Reference Comments
Zimmer Manufacturing Website. January 7, 2009, March 30, 2011.
Research Facts
Justin O. Zimmer began Zimmer Manufacturing Company in Warsaw Indiana in 1927; the Zimmer line of 50 aluminum splints debuts at the American Medical Association meeting in May of 1927 in Washington, D.C. and the Zimmer splint becomes an immediate leader in its field; the colles splint is generally used for distal-end fractures of the ulna and radius; it can be fitted to the correct angle of flexion by slightly twisting and bending; handpiece is contoured to fit the hand
Exhibit History
On exhibit in the Friend-Vandewater Gallery in Botterell Hall Queen's University; removed January 27, 2010
Images
Less detail

Colles Splint, adult

https://mhc.andornot.com/en/permalink/artifact13555
Dates
1955
1965
circa 1955-1965
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
997002508
Description
A moulded right forearm splint of cast metal that resembles the shape of a forearm; the concave arm brace has upturned sides that can be bent and shaped to the human arm and has 28 diamond-shaped cutouts arranged in four vertical lines of seven cutouts each; on the front and back sides there is dry…
  4 images  
Accession Number
997002508
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Splints
External Fixators
Orthopedic Fixation Devices
Fracture Fixation -- instrumentation
Forearm Injuries
Description
A moulded right forearm splint of cast metal that resembles the shape of a forearm; the concave arm brace has upturned sides that can be bent and shaped to the human arm and has 28 diamond-shaped cutouts arranged in four vertical lines of seven cutouts each; on the front and back sides there is dry adhesive residue present; towards the hand the brace twists slightly and narrows before joining with a cast hammer-like handgrip
Number Of Parts
1
Provenance
Donated by Dean Barry Smith, Faculty of Medicine, Queen's University
Maker
Zimmer Manufacturing Company
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1955
1965
circa 1955-1965
Date Remarks
Object is similar to 997.037.117 and the date for that object comes from a Zimmer Catalogue from 1960
Material
metal: gray
Inscriptions
Stamped into metal on bottom of the splint on the back side: "ZIMMER MFG. CO. // WARSAW [logo with a capital Z inside a diamond shape] IND. U.S.A. // 13 C"
Permanent Location
Storage Room 0010
0010-E2-16
Dimension Notes
Length 27.6 cm x Width 10.5 cm x Depth 6.9 cm
Condition Remarks
Metal is scratched and scuffed all over object; adhesive marks are present on the back and front of the object but are no longer tacky; metal is corroding and beginning to pit all over the front; handle is very pitted and discoloured
Copy Type
Original
Reference Types
Internet
JPG
Reference Comments
Zimmer Manufacturing Website. January 7, 2009, March 30, 2011.
Research Facts
Justin O. Zimmer began Zimmer Manufacturing Company in Warsaw Indiana in 1927; the Zimmer line of 50 aluminum splints debuts at the American Medical Association meeting in May of 1927 in Washington, D.C. and the Zimmer splint becomes an immediate leader in its field; the colles splint is generally used for distal-end fractures of the ulna and radius; it can be fitted to the correct angle of flexion by slightly twisting and bending; handpiece is contoured to fit the hand
Exhibit History
On exhibit in the Friend-Vandewater Gallery in Botterell Hall, Queen's University; removed January 27, 2010
Images
Less detail

Colles splint, adult

https://mhc.andornot.com/en/permalink/artifact13556
Dates
1955
1965
circa 1955-1965
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
997002509
Description
A moulded left forearm splint of cast metal that resembles the shape of a forearm; the concave arm brace has upturned sides that can be bent and shaped to the human arm; has 28 diamond-shaped cutouts arranged in four vertical lines of seven cutouts each; towards the hand the splint twists slightly …
  5 images  
Accession Number
997002509
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Splints
External Fixators
Orthopedic Fixation Devices
Fracture Fixation -- instrumentation
Forearm Injuries
Description
A moulded left forearm splint of cast metal that resembles the shape of a forearm; the concave arm brace has upturned sides that can be bent and shaped to the human arm; has 28 diamond-shaped cutouts arranged in four vertical lines of seven cutouts each; towards the hand the splint twists slightly and narrows before joining with a cast hammer-like handgrip
Number Of Parts
1
Provenance
Donated by Dean Barry Smith, Faculty of Medicine, Queen's University
Maker
Zimmer Manufacturing Company
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1955
1965
circa 1955-1965
Date Remarks
Object is similar to 997.037.117 and the date for that object comes from a Zimmer catalogue from 1960
Material
metal: gray
Inscriptions
Stamped into the metal on the bottom of the splint on the back side: "ZIMMER MFG. CO. // WARSAW [logo with a capital Z inside a diamond shape] IND. U.S.A. // 13 D"
Permanent Location
Storage Room 0010
0010-E2-16
Dimension Notes
Length 27.4 cm x Width 9.6 cm x Depth 6 cm
Condition Remarks
Scratches and scuff marks are present all over splint; handgrip is pitted and discoloured; the side that would have been closest to the arm is discoloured and shows signs of wear
Copy Type
Original
Reference Types
Internet
JPG
Reference Comments
Zimmer Manufacturing Website. January 7, 2009, March 30, 2011.
Research Facts
Justin O. Zimmer began Zimmer Manufacturing Company in Warsaw Indiana in 1927; the Zimmer line of 50 aluminum splints debuts at the American Medical Association meeting in May of 1927 in Washington, D.C. and the Zimmer splint becomes an immediate leader in its field; the colles splint is generally used for distal-end fractures of the ulna and radius; it can be fitted to the correct angle of flexion by slightly twisting and bending; handpiece is contoured to fit the hand
Exhibit History
On exhibit in the Friend-Vandewater Gallery in Botterell Hall, Queen's University; removed January 27, 2010
Images
Less detail

dental drill controls

https://mhc.andornot.com/en/permalink/artifact11665
Dates
1957
1970
circa 1957-1970
Collection
Hotel Dieu Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
997010003
Description
Controls for Borden Airotor dental drill consists of vertical rectangular metal carcass supported by base on wheels; carcass has slot for retractable drill bit , metal handle, dial and gage at front and top, hook on side and handle at back which opens panel to interior compartment; interior has mec…
  4 images  
Accession Number
997010003
Collection
Hotel Dieu Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Dental High Speed Equipment
Dentistry
Dental Restoration, Permanent
MM= Dentistry, Operative -- drill
Description
Controls for Borden Airotor dental drill consists of vertical rectangular metal carcass supported by base on wheels; carcass has slot for retractable drill bit , metal handle, dial and gage at front and top, hook on side and handle at back which opens panel to interior compartment; interior has mechanism including plastic and metal tubes, cloth braided cable, two glass jars and plastic bottle; carcass has cables at back; one cable ends in foot-operated pedal and another cable in metal nozzle attachment for external compressor.
Number Of Parts
1
Provenance
Used at Hotel Dieu Hospital in Kingston
Maker
Amalgamated Dental Engineering Industries Ltd.
Site Made (City)
Walton-On-Thames
Site Made (State)
Surrey
Site Made (Country)
England
Dates
1957
1970
circa 1957-1970
Date Remarks
Date based on date of first commercially manufactured and distributed Borden Airotor, style of "Sterling" label indicates c 1950s.
Material
metal: beige, silver, yellow
plastic: grey, black, clear
rubber: black, grey, clear
glass: clear
fabric: black, grey
liquid: yellow
Inscriptions
Embossed on nameplate affixed to carcass: "Sterling"; printed on metal plate: "STERLING CONTROLS // FOR // BORDEN AIROTOR // AN "AMALGAMATED DENTAL" PRODUCT // TYPE 4 // SERIAL NO 2477".
Permanent Location
Storage Room W1
W1-4-2
Dimension Notes
Length 99.0 cm x Width 32.0 cm x Depth 27.0 cm
Condition Remarks
Paint wearing off carcass; minor scratching on sides; organic residue on base and in slot; rubber edging is cracked and detaching from carcass at top; interior walls of carcass stained and rusting; rubber ring stiff; plastic bottle stained; glass jar showing fracture lines; cloth braided cable is frayed and cut at one end; cable to pedal is beginning to pulverize; rubber on pedal is torn.
Copy Type
Original
Reference Types
Internet
JPG
Reference Comments
Wikipedia; CD #6
Research Facts
Used as controls for Borden Airotor dental drill
Images
Less detail

examination chair

https://mhc.andornot.com/en/permalink/artifact11696
Dates
1950
1960
circa 1950-1960
Collection
Hotel Dieu Hospital Collection
Category
Patient Care Artifacts
Classification
Patient Care
Accession Number
997010006
Description
Examination chair consists of tapering round metal base with foot operated hydraulic pump; base supports a vinyl covered seat with arm rests and vinyl covered back and adjustable head rest; head rest is adjustable at three joints. Note; bottom of chair has holders for footrest; footrest is missing
  1 image  
Accession Number
997010006
Collection
Hotel Dieu Hospital Collection
Category
Patient Care Artifacts
Classification
Patient Care
MeSH Heading
Physical Examination -- instrumentation
MM= Interior Design and Furnishings -- furniture, medical
Description
Examination chair consists of tapering round metal base with foot operated hydraulic pump; base supports a vinyl covered seat with arm rests and vinyl covered back and adjustable head rest; head rest is adjustable at three joints.
Note; bottom of chair has holders for footrest; footrest is missing
Number Of Parts
1
Provenance
Used at Hotel Dieu Hospital
Maker
Raymond Industries
Site Made (City)
Minneapolis
Site Made (State)
Minnesota
Site Made (Country)
United States of America
Dates
1950
1960
circa 1950-1960
Date Remarks
Similar to object appearing in catalogue published 1960
Material
metal: silver, black
vinyl: black
wood: brown
cardboard: brown
plastic: black, white
Inscriptions
Printed on label stapled to bottom of seat: "ALL NEW MATERIAL CONSISTING OF // POLYETHER 75% // RESIN TREATED // COTTON LINTERS 25 % // Lic. No. Cal. 15351 (Minn.) // MADE BY // RAYMOND INDUSTRIES INCORPORATED // 460 HOOVER STREET, N. E. // MINNEAPOLIS, MINN. 55413"
Printed on sticker affixed to base: "HOTEL DIEU HOSPITAL // ASSET NO 00351"
Handwritten with marker on tape affixed to seat back: "113"
Printed on sticket affixed to seat back: "Raymond Industries // STYLETTE 04281 RIS // RAYMOND IND. INC. MPLS. MINN."
Permanent Location
Storage Room W1
W1-12-1
Dimension Notes
Length 139.0 cm x Width 66.0 cm x Depth 66.0 cm
Condition Remarks
Vinyl on seat is impressed; vinyl is torn along seam of armrests; metal on seat and base is slightly rusty; base is slightly scratched; paint is chipped on headrest and headrest vinyl is patched with tape
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"The J. F. Hartz Hospital and Physicians Equipment and Supplies", 1960, p. 186 (similar to Royal Hydraulic Utility Chair); CD #5.
Research Facts
Used for examination, possibly dental examination
Images
Less detail

examination chair

https://mhc.andornot.com/en/permalink/artifact11702
Dates
1960
1970
circa 1960-1970
Collection
Hotel Dieu Hospital Collection
Category
Patient Care Artifacts
Classification
Patient Care
Accession Number
997010009 a-b
Description
(a) examination chair consists of enamel painted metal base with 4 legs; threaded vertical shaft with wheel to adjust height extends from base to support vinyl covered seat; seat back and arm rests are adjustable; two gooseneck lamps extend from seat back; bulbs of lamps have round plastic casing w…
  2 images  
Accession Number
997010009 a-b
Collection
Hotel Dieu Hospital Collection
Category
Patient Care Artifacts
Classification
Patient Care
MeSH Heading
Physical Examination -- instrumentation
MM= Interior Design and Furnishings -- furniture, medical
Description
(a) examination chair consists of enamel painted metal base with 4 legs; threaded vertical shaft with wheel to adjust height extends from base to support vinyl covered seat; seat back and arm rests are adjustable; two gooseneck lamps extend from seat back; bulbs of lamps have round plastic casing with glass convex lens; each lamp has switch and electric cord and plug; adjustable head rest extends from seat back and includes rolls of paper; loose paper (b) label attached to seat with tape.
Number Of Parts
2
Part Names
a - examination chair - Size: Length 1.30 m. x Width 65.0 cm. x Depth 57.5 cm.
b - label - Size: Length 4.0 cm x Width 2.0 cm.
Provenance
Used at Hotel Dieu Hospital
Maker
Surgical Mechanical Research Inc.
Site Made (City)
Newport Beach
Site Made (State)
California
Site Made (Country)
United States of America
Dates
1960
1970
circa 1960-1970
Date Remarks
Date based on appearance of object
Material
metal: silver, light green
paint: light green
vinyl: dark green
plastic: black, grey
rubber: black
wood: brown
fabric: black
glass: transparent, translucent
paper: white, yellow, black
Inscriptions
Printed on sticker affixed to head rest: "Surgical Mechanical Research, Inc. // 883 WEST 16th STREET, NEWPORT BEACH, CALIFORNIA"; engraved on metal of seat back: "R66015"; printed on sticker affixed to lamp: "AJUSCO // ADJUSTABLE // FIXTURE CO. // MILWAUKEE, WIS."; embossed on plastic casing of lamp: "SURG.MECH.RESEARCH // L.A. CALIF."; printed on label taped to artifact: "Underwriter's Laboratories. Inc. // LISTED // PORTABLE LAMP // ISSUE 50,148 // AJUSCO // [MIL]WAUKEE, WISCONSIN"
Permanent Location
(a): Storage Room W1
W1-11-1
(b): Storage Room 2005
2005-2-5 Box 18
Condition Remarks
Coating flaking from leg and exposed metal rusting; legs are scratched; fabric detaching from back of seat; light rust on arm and head rests; plastic broken on right arm rest and on left lamp casing; adhesive residue on seat back; slight pulverization of rubber on head rest; paper on head rest ripped.
Copy Type
Original
Reference Types
JPG
Reference Comments
CD #5; CD #6
Research Facts
Used for examination, possibly dental
Images
Less detail
Dates
1968
1986
circa 1968 – 1986
Category
Diagnostic & Treatment Artifacts
Classification
Diagnosis
Cardiology
Supplies, Hospital
Accession Number
997010011
Description
Full cylindrical semi-transparent plastic Cardio-Cream squeeze bottle with non-removable cylindrical white plastic screw cap; nearly full with white cream; base has slight circular push up with lot number stamped in black ink and manufacturer information embossed; cylindrical body has straight side…
  5 images  
Accession Number
997010011
Category
Diagnostic & Treatment Artifacts
Classification
Diagnosis
Cardiology
Supplies, Hospital
MeSH Heading
Supplies, Hospital
Electrocardiography
Electroencephalography
Electrosurgery
Diagnosis
Description
Full cylindrical semi-transparent plastic Cardio-Cream squeeze bottle with non-removable cylindrical white plastic screw cap; nearly full with white cream; base has slight circular push up with lot number stamped in black ink and manufacturer information embossed; cylindrical body has straight sides with product information and direction printed in English on front and in French on back in navy ink; mold lines on sides from base to top; flat shoulders taper to cylindrical finish with continuous external thread; cap has thick vertical indents in sides and sides taper to flat top with hinged rectangular spout nozzle.
Number Of Parts
1
Provenance
Used at Hotel Dieu Hospital in Kingston.
Maker
Ingram & Bell Limited
Site Made (Country)
Canada
Dates
1968
1986
circa 1968 – 1986
Date Remarks
Presence of Ingram & Bell logo adopted in late 1960s; company became Ingram & Bell Inc. in 1986
Material
plastic: semi-clear, white
ink: navy, black
Inscriptions
Printed on front of bottle: “CARDIO-CREAM // An electroconductive cream designed // to give maximum conductivity between // skin and electrode. For use in electro- // cardiography, electroencephalography // and electrosurgical procedures. // DIRECTIONS: Apply a thin layer of // cream onto the skin areas. // Choose // areas relatively free of hair. Spread the // cream evenly and attach the electrode. // The emulsifying action solubilizes the // skin oils thus ensuring a good contact. // After using, the cream may be mas- // saged into skin or wiped off with // a tissue. // FOR EXTERNAL USE ONLY // INGRAM & BELL LIMITED // TORONTO // CANADA”; stamped on bottom in black ink: “(L) 384140”; embossed on bottom: “PLAX”
Permanent Location
Storage Room 0010
0010-A1-6 Row B
Length
13.4 cm
Diameter
4.5 cm
Unit Of Measure
centimeters
Condition Remarks
Minor fading of stamped lot number on base
Copy Type
original
Reference Types
Artifact
Document
Website
Reference Comments
Label on artifact (997.010.011)
Ingram & Bell Limited. Pharmaceutical Catalogue, 1969.
MDS Inc. “Mds Inc. Annual Information Form for the Year Ended October 31, 2002.” MDS Inc., 2003.
“Cardinal Health Canada Inc.” Canadian Business Resource, Canadian Newspaper Services International Limited, 2019. Accessed 7 August 2019.
Research Facts
Cardio-Cream was a product marketed by Ingram & Bell specifically for use in hospitals and for medical professionals; it was an electroconductive cream used in electrocardiography, electroencephalography, and electrosurgical procedures.
Ingram & Bell Limited was a medical supply company first established in Toronto in 1905; the company became a Canadian leader in the distribution of medical products; their wide selection included equipment, surgical tools, and pharmaceuticals; as the company grew, they established branches in Montreal, Winnipeg, Calgary, and Vancouver; became Ingram & Bell Inc. and 49% owned by MDS in 1986; MDS acquired 100% in 1993; became Source Medical Corporation after merger with Allegiance Healthcare Canada Inc. in 1997; acquired by Cardinal Health Canada Inc. in 2005.
Images
Less detail
Dates
1968
1986
circa 1968 – 1986
Category
Diagnostic & Treatment Artifacts
Classification
Diagnosis
Cardiology
Supplies, Hospital
Accession Number
997010012
Description
Full cylindrical semi-transparent plastic Cardio-Cream squeeze bottle with non-removable cylindrical white plastic screw cap; nearly full with white cream; base has slight circular push up with lot number stamped in black ink and manufacturer information embossed; cylindrical body has straight side…
  5 images  
Accession Number
997010012
Category
Diagnostic & Treatment Artifacts
Classification
Diagnosis
Cardiology
Supplies, Hospital
MeSH Heading
Supplies, Hospital
Electrocardiography
Electroencephalography
Electrosurgery
Diagnosis
Description
Full cylindrical semi-transparent plastic Cardio-Cream squeeze bottle with non-removable cylindrical white plastic screw cap; nearly full with white cream; base has slight circular push up with lot number stamped in black ink and manufacturer information embossed; cylindrical body has straight sides with product information and direction printed in English on front and in French on back in navy ink; mold lines on sides from base to top; flat shoulders taper to cylindrical finish with continuous external thread; cap has thick vertical indents in sides and sides taper to flat top with hinged rectangular spout nozzle.
Number Of Parts
1
Provenance
Used at Hotel Dieu Hospital in Kingston.
Maker
Ingram & Bell Limited
Site Made (Country)
Canada
Dates
1968
1986
circa 1968 – 1986
Date Remarks
Presence of Ingram & Bell logo adopted in late 1960s; company became Ingram & Bell Inc. in 1986
Material
plastic: semi-clear, white
ink: navy, black
Inscriptions
Printed on front of bottle: “CARDIO-CREAM // An electroconductive cream designed // to give maximum conductivity between // skin and electrode. For use in electro- // cardiography, electroencephalography // and electrosurgical procedures. // DIRECTIONS: Apply a thin layer of // cream onto the skin areas. // Choose // areas relatively free of hair. Spread the // cream evenly and attach the electrode. // The emulsifying action solubilizes the // skin oils thus ensuring a good contact. // After using, the cream may be mas- // saged into skin or wiped off with // a tissue. // FOR EXTERNAL USE ONLY // INGRAM & BELL LIMITED // TORONTO // CANADA”; stamped on bottom in black ink: “(L) 384140”; embossed on bottom: “PLAX”
Permanent Location
Storage Room 0010
0010-A1-6 Row B
Length
13.4 cm
Diameter
4.5 cm
Unit Of Measure
centimeters
Condition Remarks
Minor fading of stamped lot number on base
Copy Type
original
Reference Types
Artifact
Document
Website
Reference Comments
Label on artifact (997.010.012)
Ingram & Bell Limited. Pharmaceutical Catalogue, 1969.
MDS Inc. “Mds Inc. Annual Information Form for the Year Ended October 31, 2002.” MDS Inc., 2003.
“Cardinal Health Canada Inc.” Canadian Business Resource, Canadian Newspaper Services International Limited, 2019. Accessed 7 August 2019.
Research Facts
Cardio-Cream was a product marketed by Ingram & Bell specifically for use in hospitals and for medical professionals; it was an electroconductive cream used in electrocardiography, electroencephalography, and electrosurgical procedures.
Ingram & Bell Limited was a medical supply company first established in Toronto in 1905; the company became a Canadian leader in the distribution of medical products; their wide selection included equipment, surgical tools, and pharmaceuticals; as the company grew, they established branches in Montreal, Winnipeg, Calgary, and Vancouver; became Ingram & Bell Inc. and 49% owned by MDS in 1986; MDS acquired 100% in 1993; became Source Medical Corporation after merger with Allegiance Healthcare Canada Inc. in 1997; acquired by Cardinal Health Canada Inc. in 2005.
Images
Less detail

1138 records – page 1 of 114.