Skip header and navigation

Refine By

   MORE
   MORE

186 records – page 1 of 19.

Bennett's inhaler

https://mhc.andornot.com/en/permalink/artifact4632
Dates
1900
1930
circa 1900-1930
Collection
Dr. Publow Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
994011014
Description
The inhaler is a hollow, metal cylindrical instrument with two hollow metal tubes leading to two plastic anaesthetic delivery cups; at the bottom of the cylinder, there is a metal cap that was once removable; it has gripping lines stamped into the metal and two vertical rectangular slots on opposi…
  1 image  
Accession Number
994011014
Collection
Dr. Publow Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Administration, Inhalation -- instrumentation
MM= Administration Drug, Inhalation -- inhaler
MM= Anesthesia, Inhalation -- inhaler/mask -- inhaler
Description
The inhaler is a hollow, metal cylindrical instrument with two hollow metal tubes leading to two plastic anaesthetic delivery cups; at the bottom of the cylinder, there is a metal cap that was once removable; it has gripping lines stamped into the metal and two vertical rectangular slots on opposite ends of the diameter of the cap; the bottom of the cap is flat; a metal disk caps this cylinder; from the curved top of this disk, two hollow metal tubes extend, curving outwards slightly away from each other, and forwards; these tubes are each capped by a brown plastic applicator; each applicator has a rounded conical shape with a round hole at the top.
Number Of Parts
1
Provenance
Originally owned by Dr. Publow, who practised in Prince Edward County between 1850 and 1900. Given to Dr. M. Williams, head of Otolaryngology at Queen's University.
Site Made (City)
Toronto
Site Made (State)
Ontario
Site Made (Country)
Canada
Dates
1900
1930
circa 1900-1930
Material
metal: silver
plastic: brown
Inscriptions
"HARTZ CO", "DETROIT, CLEVELAND, TORONTO" and "PAT. APPL'D FOR" stamped into the metal cylinder
Permanent Location
Storage Room 0010
0010-F2-1
Dimension Notes
Length 15.0 cm x Width 3.5 cm x Depth 2.8 cm
Condition Remarks
Accretion of a white deposit on nasal applicators at rim of metal attachment; moderate patches of corrosion on metal surface; cap at the bottom of the instrument cannot be removed; #2: tarnished.
Copy Type
Original
Reference Types
Book
Person
Reference Comments
Dr. M. Williams; "Illustrated Catalogue of a Complete Line of Standard Surgical Instruments," by Codman & Shurtleff, 1920, p. 23 (item #1253)
Research Facts
This anaesthetic inhaler was filled with cotton batting saturated with ether or chloroform; the anaesthetic was delivered to the patient by inserting the delivery cups into the nostrils. Dr. Williams identified this item as a "nasal douche."
Exhibit History
On display at Hotel Dieu Hospital circa 1983-1993; the item was mounted on an acidic board with copper-covered wires to secure it.
Images
Less detail

folding anaesthesia mask

https://mhc.andornot.com/en/permalink/artifact4649
Dates
1900
1920
circa 1900-1920
Collection
Dr. Publow Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
994011031 a-b
Description
Anaesthesia mask (a) and attachment (b); both components are largely comprised of solid, smooth, metal wires; the mask (a) is a circular frame with a looped arm at one end; four thinner wires are attached to each side of the frame, so that they intersect at a midpoint; several fabric threades tie t…
  1 image  
Accession Number
994011031 a-b
Collection
Dr. Publow Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- folding
Description
Anaesthesia mask (a) and attachment (b); both components are largely comprised of solid, smooth, metal wires; the mask (a) is a circular frame with a looped arm at one end; four thinner wires are attached to each side of the frame, so that they intersect at a midpoint; several fabric threades tie the wires together at the midpoint; the frame tapers at one end to form the looped arm; a thin band of metal holds the wires together, and they separate at the other end of this band and form a loop; a small, round, solid metal rod extends from the outer surface of this band, and is capped by a metal button; attachment (b) joins the mask by this button; (b) is composed of one thin round wire; it is roughly the same size and shape as the frame of (a); the metal arm extending from (b) is much shorter than the arm of (a); it extends only as far as the button on the mask, and there is no flat band of metal joining its wires.
Number Of Parts
2
Part Names
a - mask - Size: Length 16.0 cm x Width 9.0 cm x Depth 5.5 cm
b - attachment - Size: Length 13.0 cm x Width 9.0 cm x Depth 0.2 cm
Provenance
Originally owned by Dr. Publow, who practised in Prince Edward County between 1850 and 1900. Given to Dr. M. Williams, head of Otolaryngology at Queen's University.
Dates
1900
1920
circa 1900-1920
Material
metal: silver
fabric: light brown
Inscriptions
None
Permanent Location
Storage Room 0010
0010-F3-12
Temporary Location
On exhibit “The Century: Medical Innovations of the 1800s” at Museum of Health Care, 25 June 2017.
Condition Remarks
The wires holding the objects to the mount board caused small patches of corrosion to transfer; some small scratches, slight signs of wear and marks from securing wires exist along rims of both metal frames; no dents; slight wearing of plating where mask wires are attached to frame (a); #2: metal is tarnished.
Copy Type
Original
Reference Types
Book
Person
Reference Comments
Dr. M. Williams; "Illustrations of Surgical Instruments of Superior Quality," The Kny-Scheerer Co., ca. 1915, p. 2002 (similar to item #B/-53)
Research Facts
Dr. Williams identified the item as an "ether mask"; similar to item shown in catalogue, but artifact has one additional mask wire, and no clip at the top; the artifact also has a securing button on the lower arm to attach (b)
Exhibit History
On display at Hotel Dieu Hospital circa 1983-1993; the item was mounted on an acidic board with copper-covered wires to secure it.
Images
Less detail
Dates
1940
1960
circa 1940-1960
Collection
Dr. Publow Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
994011032
Description
The ether hook consists of a hollow metal tube; a small, cup-shaped metal cylinder with a round hole at the end tapers into a round metal tube; the tube flares near the hook end, and then narrows to form a flat tube; this flat portion curves to form a hook; the hook ends with an oblong hole, with a…
  1 image  
Accession Number
994011032
Collection
Dr. Publow Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- accessories -- tube
Description
The ether hook consists of a hollow metal tube; a small, cup-shaped metal cylinder with a round hole at the end tapers into a round metal tube; the tube flares near the hook end, and then narrows to form a flat tube; this flat portion curves to form a hook; the hook ends with an oblong hole, with a curved, square piece of metal extending slightly past the hole on the inner side of the curve.
Number Of Parts
1
Provenance
Originally owned by Dr. Publow, who practised in Prince Edward County between 1850 and 1900. Given to Dr. M. Williams, head of Otolaryngology at Queen's University.
Dates
1940
1960
circa 1940-1960
Date Remarks
Similar item identified in 1966 catalogue
Material
metal: silver
Inscriptions
None
Permanent Location
Storage Room 0010
0010-F2-2
Dimension Notes
Length 8.8 x Width 2.0 cm x Depth 1.0 cm
Condition Remarks
Item shows signs of wear; plating is worn along the edges of the hook; there are small scratches and dents along the tube; two patches of plate wear appear on the cup; no large dents or signs of corrosion; plate wear also appears in the form of black lines in the crease between the cup and the rod; #2: tarnished.
Copy Type
Original
Reference Types
Book
Person
Reference Comments
Dr. M. Williams; "Surgical Instrument Catalogue," by the Storz Instrument Co., 1966, p. 284 (similar to item #N-7611)
Research Facts
Dr. Williams identified this item as an "ether hook."
Exhibit History
On display at Hotel Dieu Hospital circa 1983-1993; the item was mounted on an acidic board with copper-covered wires to secure it.
Images
Less detail

Trilene vaporizer dial

https://mhc.andornot.com/en/permalink/artifact1872
Dates
1970
2000
circa 1970-2000
Collection
Angada Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
995003094
Description
Dial from a trilene vaporizer; the dial is cylindrical with a threaded screw attachment at one end and a dial with graduation marks and a hollow cylindrical nozzle at the other end; the nozzle points upwards and is open at the top.
  2 images  
Accession Number
995003094
Collection
Angada Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Administration Inhalation -- instrumentation
Analgesics -- administration
MM= Nebulizers and Vaporizers -- vaporizer
Description
Dial from a trilene vaporizer; the dial is cylindrical with a threaded screw attachment at one end and a dial with graduation marks and a hollow cylindrical nozzle at the other end; the nozzle points upwards and is open at the top.
Number Of Parts
1
Provenance
Used at the Kingston General Hospital.
Maker
Cyprane Ltd.
Site Made (City)
Keighley
Site Made (Country)
England
Dates
1970
2000
circa 1970-2000
Material
metal: silver
Inscriptions
One end stamped with the words, "CYPRANE LTD // KEIGHLEY // ENGLAND"; the dial has the words, "MAX TRILENE MIN" and graduation marks
Permanent Location
Storage Room 0010
0010-F2-6
Dimension Notes
Length: 12.2 cm. x Diam. : 5.2 cm.
Condition Remarks
The dial was very dirty and dusty; there is a dent in the metal at one end; no corrosion is visible and the chrome is unstained
Copy Type
Original
Images
Less detail
Dates
1959
1965
circa 1959-1965
Collection
Dr. Burns Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
995005116 a-b
Description
A Brook airway consisting of a rubber airway (a) which is shaped to fit over a mouth with a tube that would go into the throat; there is a tube extending from the front which attaches to a plastic tube with a red rubber filter inside
  2 images  
Accession Number
995005116 a-b
Collection
Dr. Burns Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
Description
A Brook airway consisting of a rubber airway (a) which is shaped to fit over a mouth with a tube that would go into the throat; there is a tube extending from the front which attaches to a plastic tube with a red rubber filter inside
Number Of Parts
2
Part Names
a - airway - Size: Length 12.2 cm x Width 7.7 cm x Depth 6.1 cm
b - tube - Size: Length 11.3 cm x Width 3.0 cm x Depth 2.3 cm
Provenance
Owned and used by Dr. Burns of Napanee, Ont., graduate of the Queen's University Faculty of Medicine Class of 1947; some items belonged to Dr. Stratton, who held the Napanee practice prior to Dr. Burns.
Maker
Brook
Dates
1959
1965
circa 1959-1965
Date Remarks
Patented in 1959
Material
rubber: clear, red
plastic, clear
Inscriptions
"BROOK AIRWAY // PATENTED 1959" printed on the mask
Permanent Location
Storage Room 0010
0010-F2-9
Condition Remarks
Some wear on the rubber and plastic; sticky surface
Copy Type
Original
Images
Less detail

Inhalozone inhaler tube

https://mhc.andornot.com/en/permalink/artifact2164
Dates
1890
1920
circa 1890-1920
Collection
Dr. Michael A. Chiong Patent Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
996001085
Description
Clear glass vial with two corked ends and wad of cotton (?) inside vial; paper label around one end of vial.
  1 image  
Accession Number
996001085
Collection
Dr. Michael A. Chiong Patent Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Administration, Inhalation -- instrumentation
MM= Administration Drug, Inhalation -- inhaler
Description
Clear glass vial with two corked ends and wad of cotton (?) inside vial; paper label around one end of vial.
Number Of Parts
1
Provenance
Acquired by Dr. M. Chiong for his patent medicine collection.
Dates
1890
1920
circa 1890-1920
Material
paper: cream
glass: clear
cork: brown
Inscriptions
Inhalozone // Inhaler // remove the cork // and drop in six drops // of the liquid Inhal - // ozone four times // each day before // using
Permanent Location
Storage Room 0010
0010-A4-6 Box 1 Row F
Dimension Notes
Length: 10.3 cm. x Diam. : 1.5 cm.
Condition Remarks
Paper label discoloured; corks at each end in fairly worn condition
Copy Type
Original
Images
Less detail
Dates
1940
1960
circa 1940-1960
Collection
McPherson Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997003030
Description
Ether hook, which consists of a cylindrical hollow metal tube with a round, open end and a tip that has been bent into a semicircle; the bent tip is flattened, but still open and ends with a rounded, flat tab; the other end is round and open; there is threading at the top outside edges to allow a r…
  1 image  
Accession Number
997003030
Collection
McPherson Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- accessories -- tube
Description
Ether hook, which consists of a cylindrical hollow metal tube with a round, open end and a tip that has been bent into a semicircle; the bent tip is flattened, but still open and ends with a rounded, flat tab; the other end is round and open; there is threading at the top outside edges to allow a rubber tube to be attached and held on.
Number Of Parts
1
Provenance
Owned and used by Dr. Malcolm E. McPherson, a graduate of Queen's School of Medicine in 1929; Dr. McPherson practised in Hawthorne, NS; he was a G.P. but specialized in gynecology.
Dates
1940
1960
circa 1940-1960
Material
metal: silver
Inscriptions
None
Permanent Location
Storage Room 0010
0010-F2-2
Dimension Notes
Length 11.1 cm x Width 2.7 cm x Depth 1.0 cm
Condition Remarks
The ether hook shows only minor wear and no corrosion.
Copy Type
Original
Reference Types
Book
Reference Comments
"Surgical Instruments Suction and Pressure Apparatus," J. Sklar Mfg. Co., Inc., 1967, p. 34 (item #120-10)
Exhibit History
Loaned to the Agnes Etherington Art Centre for the Museopathy exhibit, May 24-Sept. 13, 2001
Images
Less detail

Boyle anaesthesia apparatus

https://mhc.andornot.com/en/permalink/artifact1873
Dates
1970
1990
circa 1970-1990
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008001 a-d
Description
(a) Boyle apparatus anaesthetic machine which consists of a frame of four cylindrical legs with wheels at the bottom; there is a horizontal steel shelf at the top of the four legs which has two vertical bars at the back with a horizontal rack on top of them; the right side of the shelf has two nitr…
  2 images  
Accession Number
997008001 a-d
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- machine
Description
(a) Boyle apparatus anaesthetic machine which consists of a frame of four cylindrical legs with wheels at the bottom; there is a horizontal steel shelf at the top of the four legs which has two vertical bars at the back with a horizontal rack on top of them; the right side of the shelf has two nitrous oxide tank clamps with pressure gauges and a rubber hose and bulb for a blood pressure cuff; the left side of the shelf has two oxygen tank clamps with pressure gauges, and an absorber attachment; below the shelf is a pull-out steel writing shelf; near the bottom of the legs are two cylindrical, horizontal metal attachments which support (b) a heavy glass shelf and two metal attachments at the side which hold (c) a metal drawer with a handle at the front and a divider in the middle, made to hold accessories ; (d) the front of the metal shelf has a removable steel attachment for a rebreathing bag.
Number Of Parts
4
Part Names
a - anaesthetic machine - Size: Length 127.4 cm. x Width 75.5 cm. x Depth 58.7 cm.
b - glass tray - Size: Length 44.0 cm. x Width 44.0 cm. x Depth 0.6 cm.
c - drawer - Size: Length 39.3 cm. x Width 45.8 cm. x Depth 14.2 cm.
d - attachment for rebreathing bag - Size: Length 39.3 cm. x Width 6.4 cm. x Depth 2.6 cm.
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario.
Maker
Canadian Oxygen Limited
Dates
1970
1990
circa 1970-1990
Material
plastic: black
glass: clear
rubber: dark green; black
metal: silver
Inscriptions
There are two labels at the back of the top steel shelf which read, "CANADIAN OXYGEN LIMITED // BOYLE // APPARATUS // SERIAL NUMBER K032 // BOC" and "HOTEL DIEU HOSPITAL // ASSET NO. 04048"; under the steel shelf is another label which reads, "CANOX // CANADIAN OXYGEN LIMITED // BOC"
Permanent Location
Storage Room W1
W1-6-1
Condition Remarks
Machine arrived very dirty and dusty; many of the attachments such as gas cylinders, regulators, hoses and tubing are no longer with the machine; most of the metal parts are uncorroded, with the exception of a small spot on the top vertical bar at the right side; the glass shelf has minor chips at the right side edge; #2 no new damage
Copy Type
Original
Reference Types
Person
Book
Reference Comments
Dr. Ray Matthews; "Anaesthetic Equipment -- Physical Principles and Maintenance" by C. S. Ward, 1975, p. 73; Boyle manuals
Exhibit History
On exhibit in Museum gallery, Anaesthesia exhibit, Oct. 2 1997-Oct. 24, 2001
Images
Less detail

McKesson anaesthesia machine

https://mhc.andornot.com/en/permalink/artifact1874
Dates
1940
1950
circa 1945-1950
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008002
Description
McKesson deep breath demand flow anaesthesia machine with absorber Model 620; the absorber is a cylindrical container with an on/off dial and hours used indicator on top; the side of the machine has an oxygen hook-up on the right and a cyclopropane hook-up on the left; other parts include a dial at…
Accession Number
997008002
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- machine
Description
McKesson deep breath demand flow anaesthesia machine with absorber Model 620; the absorber is a cylindrical container with an on/off dial and hours used indicator on top; the side of the machine has an oxygen hook-up on the right and a cyclopropane hook-up on the left; other parts include a dial at the back with a red pointer which controlled the % oxygen; to the right is a direct oxygen button; a regulated pressure dial can be seen opposite the % oxygen dial; the regulated pressure is in mm of pressure; there are two oxygen operating range dials either side of the pressure regulator; there are two rubber hoses at the sides of the machine which hooked up to oxygen; each side of the machine has a round bellow; the machine is attached to a cylindrical metal pole on a four-wheel stand.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario.
Maker
McKesson Appliance Co.
Site Made (City)
Toledo
Site Made (State)
Ohio
Site Made (Country)
United States of America
Dates
1940
1950
circa 1945-1950
Material
plastic: black
glass: clear
rubber: cream
metal: silver; grey; green
Inscriptions
The top of the absorber reads, "McKESSON APPLIANCE CO. // TOLEDO // OHIO // U.S.A. // HOURS USED // ABSORBER // MODEL 620 // SER. NO. 4723"; the percent oxygen dial is marked 0 to 45 in intervals of 5; the dial beside it reads, "McKesson Nargraf // PAT. NOS. RE-17512-1,632,449-1,687,255 OTHER PATS PEND. // REG. U.S. PAT OFF. // McKESSON APPLIANCE CO., TOLEDO, OHIO, U.S.A. // OXYGEN PERCENT // 100 75 50 25 0 // MODEL L // USE SMALL DIAL"; the direct oxygen button is labelled, "DIRECT // OXYGEN // PRESS // BUTTON"; the regulated pressure dial is labelled "PRESSURE // mm // 0 5 10 20 30 40 OFF"; the two operating range dials both read, "OPERATING // RANGE // LOW // HIGH // McKESSON APPLIANCE CO. // TOLEDO, OHIO, U.S.A. // U.S. // GAUGE // CO. // N.Y. // MADE IN U.S.A. // AD-7739"
Permanent Location
Storage Room 0009
0009-1B-2
Dimension Notes
Length: 81.0 cm. x Width: 51.0 cm. x Depth: 51.0 cm.
Condition Remarks
Machine arrived very dirty and dusty; the gas cylinders and hoses are no longer with the machine and the dial to control the cyclopropane is missing; most of the metal parts are uncorroded, with the exception of a small amount at the left side; the rubber hoses are flexible and complete
Copy Type
Original
Reference Types
Person
Book
Reference Comments
Dr. Ray Matthews and John Sikora; "Ward's Anaesthetic Equipment", 3rd ed., by Andrew Davey, John T.B. Moyle and Crispian S. Ward, 1992, pp. 168-171
Research Facts
Sodalime was put into the absorber container to absorb expired carbon dioxide; the two oxygen pressure dials measured the pressure of oxygen delivered; the direct oxygen button was a flush button to fill up the circuit with oxygen or to give the patient a burst of oxygen; the bellows were used to proportion gas pressures
Less detail

Kinet-O-Meter anaesthesia machine

https://mhc.andornot.com/en/permalink/artifact1876
Dates
1940
1960
circa 1940-1960
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008004
Description
Kinet-O-meter anaesthesia machine which consists of two heavy cylindrical metal poles on a metal stand with four wheels; the top of one pole has two tank hook-ups each, for oxygen, nitrous oxide and carbon dioxide, with regulator on top; the top of the other pole has a hook-up for cyclopropane whic…
  4 images  
Accession Number
997008004
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- machine
Description
Kinet-O-meter anaesthesia machine which consists of two heavy cylindrical metal poles on a metal stand with four wheels; the top of one pole has two tank hook-ups each, for oxygen, nitrous oxide and carbon dioxide, with regulator on top; the top of the other pole has a hook-up for cyclopropane which leads to a panel with four flow meters (for nitrous oxide, cyclopropane, carbon dioxide and oxygen) in cc/liters per minute; the four flow meters lead back to the tank hook-ups by tubes; behind the flow meters, there is a blood pressure cuff manometer with a rubber tube which would originally have had a rubber bulb; a metal valve in the front was to be hooked up to the patient (via a soda lime absorber) to administer a mix of the four gases; the back of the machine has a wrench attached permanently by a metal chain, for turning on cylinders of gas.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario
Maker
Ohio Chemical & Mfg. Co.
Site Made (City)
Minneapolis
Site Made (State)
Minnesota
Site Made (Country)
United States of America
Dates
1940
1960
circa 1940-1960
Material
plastic: black; clear; blue; yellow; grey; green
rubber: black
metal: silver; yellow
Inscriptions
Label on the front of the machine reads, "HI-CO // THE HEIDBRINK CO. // MINNEAPOLIS MINNESOTA // MADE IN U.S.A. // DES. PAT. NO. 102,632"; a label under this reads, "AMERICAN [---]AL // ACCEPTED // COUNCIL // OF PHYSICAL // THERAPY"; a label under this reads, "HOTEL DIEU HOSPITAL // ASSET NO. 04026"; a manufacturer's label at the back reads, "LUNDY // ROCHESTER MODEL // HEIDBRINK // KINETO-METER // REG. U.S. PAT. OFF. // HEIDBRINK DIVISION OF // OHIO CHEMICAL & MFG CO. // MINNEAPOLIS MINN. // HI-CO // PAT. NO. 1,412,866 // PAT. NO. 1,802,601 // PAT. NO. 1,989,366 // PAT. NO. 2,073,372 // PAT. NO. 1,858,084 // OTHER PATS. APPL'D FOR // MADE IN U.S.A."
Permanent Location
Storage Room W1
W1-7-2
Dimension Notes
Length: 108.0 cm. x Width: 47.8 cm. x Depth: 61.2 cm.
Condition Remarks
The machine arrived very dirty and dusty; the pressure dials for the carbon dioxide and nitrous oxide gas hook-ups are very corroded; the plastic cover is missing for the carbon dioxide dial and broken and covered with a corrosion product for the nitrous oxide dial; the rubber hose on the main pressure dial is cracked in several spots; #2 no new damage
Copy Type
Original
Reference Types
Person
Document
Reference Comments
Dr. Ray Matthews and John Sikora; see photocopy of blood pressure manometer from 1964 Ohio catalogue; see photocopy of Tycos warranty
Research Facts
The four flow meter gauges at the front regulate the flow of nitrous oxide, cyclopropane, carbon dioxide and oxygen and were very inaccurate; carbon dioxide was used to stimulate patient respiration thus allowing quicker anaesthetizing; this model allows for two cylinders each of oxygen, nitrous oxide and carbon dioxide; this was an improvement over earlier models, as cylinders sometimes ran out of gas during operations; it was difficult to determine when the oxygen cylinder was empty and nitrous oxide pressure falls very quickly; with this model, if a tank ran dry, the patient could immediately be changed over to a full tank; another improvement was that the tanks were bigger than those in earlier models; the principle of this machine is the same as other machines in the same era; the regulators are single-stage regulators.
Exhibit History
On exhibit in Museum gallery, anaesthesia exhibit - Oct. 2 1997-Oct. 24, 2001
Images
Less detail

186 records – page 1 of 19.