Skip header and navigation

Refine By

   MORE

24 records – page 1 of 3.

St. Regis atomizer set in box

https://mhc.andornot.com/en/permalink/artifact12167
Dates
1930's
circa 1930's
Collection
Dr. R. Gordon Sinclair Collection
Category
Diagnostic & Treatment Artifacts
Classification
Treatment, General
Accession Number
002017005 a-h
Description
Atomizer set consisting of: (a) a bell-shaped glass bottle, (b) a spray metal nozzle, (c) a rubber squeeze bulb; (d) a small and (e) a medium cork, (f) a cylindrical hollow glass nozzle and also some (unnumbered) wire pieces in a box composed of (g) top box and (h) bottom box;
  2 images  
Accession Number
002017005 a-h
Collection
Dr. R. Gordon Sinclair Collection
Category
Diagnostic & Treatment Artifacts
Classification
Treatment, General
MeSH Heading
Administration, Intranasal -- instrumentation
Respiratory Therapy
MM= Administration Drug, Inhalation
MM= Nebulizers and Vaporizers -- atomizer
Description
Atomizer set consisting of: (a) a bell-shaped glass bottle, (b) a spray metal nozzle, (c) a rubber squeeze bulb; (d) a small and (e) a medium cork, (f) a cylindrical hollow glass nozzle and also some (unnumbered) wire pieces in a box composed of (g) top box and (h) bottom box;
Number Of Parts
8
Part Names
a - glass bottle - Size: Length 5.3 cm x Diam 4.7 cm
b - metal nozzle - Size: Length 14.2 cm x Width 5.5 cm x Depth 2.0 cm
c - squeeze bulb - Size: Length 11.8 cm x Width 5.0 cm x Depth 4.0 cm
d - small cork - Size: Length 1.5 cm x Diam 1.4 cm
e - medium cork - Size: Length 2.0 cm x Diam 1.6 cm
f - glass nozzle -Size: Length 9.3 cm x Diam 1.2 cm
g - top box - Size: Length 15.0 cm x Width 5.9 cm x Depth 6.8 cm
h - bottom box - Size: Length 14.8 cm x Width 5.7 cm x Depth 6.8 cm
Provenance
Belongs to Dr. R. Gordon Sinclair at KGH
Maker
St. Regis Company
Site Made (Country)
United States of America
Dates
1930's
circa 1930's
Date Remarks
Based on appearance
Material
cardboard: off-white
glass: transparent
plastic: gray, red
metal: silver
cork: brown
paint: black
Inscriptions
Printed on cardboard box: "UNIVERSAL ATOMIZER NO. 100 // St. Regis // For spraying Oil, Aqueous or Alcoholic // solutions. Guaranteed to give satisfaction. // MADE IN U.S.A."; Embossed on glass bottle: "ST. REGIS"; Embossed on bottom of bottle: "B1";
Permanent Location
Storage Room 0010
0010-E3-13
Condition Remarks
Inside of glass bottle is dirty and dusty; some rust is apparent on metal nozzle; the cardboard box is yellowed and the its corners are worn off; the rubber bulb is dusty and stiff;
Copy Type
Original
Reference Types
Person
Reference Comments
Dr. Gordon Sinclair
Images
Less detail

Catarrhozone Vapor Treatment Inhaler

https://mhc.andornot.com/en/permalink/artifact2433
Dates
1890
1915
circa 1890-1915
Collection
Dr. Michael A. Chiong Patent Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Pharmacy
Accession Number
996001354 a-d
Description
Hollow cylindrical black Bakelite or wood inhaler which consists of a central sestions which is wider at the middle than the ends; both ends have screw on/off attachments; one is flat and plugs one end, the other is hollow and cylindrical and has screw attachments at both ends; one end attaches to …
  2 images  
Accession Number
996001354 a-d
Collection
Dr. Michael A. Chiong Patent Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Pharmacy
MeSH Heading
Administration, Intranasal -- instrumentation
MM= Administration Drug, Inhalation -- inhaler
Description
Hollow cylindrical black Bakelite or wood inhaler which consists of a central sestions which is wider at the middle than the ends; both ends have screw on/off attachments; one is flat and plugs one end, the other is hollow and cylindrical and has screw attachments at both ends; one end attaches to the central section and the other to a pointed piece which screws on and plugs the other end; the central section has engraved words on it.
Number Of Parts
4
Part Names
Size: Length 10.3 cm. x Diam. 1.9 cm.
Provenance
Acquired by Dr. M. Chiong for his patent medicine collection.
Maker
N. C. Polson & Co.
Site Made (City)
Kingston; Hartford
Site Made (State)
Ontario; Connecticut
Site Made (Country)
Canada / USA
Dates
1890
1915
circa 1890-1915
Material
wood: black
Inscriptions
Central section engraved with, "CATARRHOZONE // N. C. POLSON & CO. // KINGSTON, CANADA // HARTFORD CONN. U. S."
Permanent Location
Storage Room 0010
0010-A2-5 Row A
Condition Remarks
There are very tiny chips at the top of the middle section; all screw on / off sections will come on and off easily
Copy Type
Original
Reference Types
Document
Photo
Reference Comments
A photograph (b & w) has been taken; there are three binders of information on the N.C. Polson Co. (Catarrhozone Co.) with Dr. Chiong's written records, including advertisements for inhalers
Research Facts
After having studied at Queen’s University, Neil C. Polson established a drug business in Kingston in 1877. N.C. Polson & Co. became widely known across North America as a druggist and chemical manufacturer.
Their trade covered Canada, the U.S. and the West Indies.
The firm was established by Neil Polson Sr. in 1877, owned a wholesale drug and manufacturing chemist house in Kingston, Ontario. and was taken over by his two sons, Neil Jr. and Henry. They made medicines under the name of Polson Co., the Catarrhozone and Nerviline. Polson went on to become mayor of Kingston in 1893.
One of their products, Catarrhozone, was widely advertised as an inhaled germ-killer and remedy for all respiratory ailments. The Vapor treatment was meant to be dropped onto a small piece of wool held inside the portable wood inhaler, then inhaled periodically through the mouth.
Exhibit History
To display in Museum: Potions, Pills and Prescriptions; May 1, 2000 - 28 Jan 2017.
Images
Less detail

Catarrhozone Vapor Treatment Inhaler

https://mhc.andornot.com/en/permalink/artifact2434
Dates
1890
1910
circa 1890-1910
Collection
Dr. Michael A. Chiong Patent Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Pharmacy
Accession Number
996001355 a-d
Description
Hollow cylindrical black Bakelite or wood inhaler which consists of a central section which is wider at the middle than the ends; both ends have screw on / off attachments; one is rounded and plugs one end, the other is hollow and cylindrical and has screw attachments at both ends; one end attaches…
  1 image  
Accession Number
996001355 a-d
Collection
Dr. Michael A. Chiong Patent Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Pharmacy
MeSH Heading
Administration, Intranasal -- instrumentation
MM= Administration Drug, Inhalation -- inhaler
Description
Hollow cylindrical black Bakelite or wood inhaler which consists of a central section which is wider at the middle than the ends; both ends have screw on / off attachments; one is rounded and plugs one end, the other is hollow and cylindrical and has screw attachments at both ends; one end attaches to the central section and the other to a rounded piece which screws on and plugs the other end; the central section has engraved words on it.
Number Of Parts
4
Part Names
Size: Length 10.8 cm. x Diam. 2.0 cm.
Provenance
Acquired by Dr. M. Chiong for his patent medicine collection.
Maker
N. C. Polson & Co.
Site Made (City)
Kingston
Site Made (State)
Ontario
Site Made (Country)
Canada
Dates
1890
1910
circa 1890-1910
Material
wood: black
Inscriptions
Central section engraved with, "CATARRHOZONE // N. C. POLSON & CO. // KINGSTON, CANADA"
Permanent Location
Storage Room 0010
0010-A2-5 Row A
Condition Remarks
The outer finish on the lower part of the central section has minor damage; the screw threads on the attachment to the upper section of the central piece have been damaged; all screw on / offsections will come on and off easily
Copy Type
Original
Reference Types
Document
Reference Comments
There are three binders of information on the N.C. Polson Company (The Catarrhozone Co.) with Dr. Chiong's written records, including advertisements for inhalers
Research Facts
After having studied at Queen’s University, Neil C. Polson established a drug business in Kingston in 1877. N.C. Polson & Co. became widely known across North America as a druggist and chemical manufacturer. One of their products, Catarrhozone, was widely advertised as an inhaled germ-killer and remedy for all respiratory ailments. The Vapor treatment was meant to be dropped onto a small piece of wool held inside the portable wood inhaler, then inhaled periodically through the mouth.
Their trade covered Canada, the U.S. and the West Indies.
The firm was established by Neil Polson Sr. in 1877, owned a wholesale drug and manufacturing chemist house in Kingston, Ontario. and was taken over by his two sons, Neil Jr. and Henry. They made medicines under the name of Polson Co., the Catarrhozone and Nerviline. Polson went on to become mayor of Kingston in 1893.
Exhibit History
To display in Museum: Potions, Pills and Prescriptions; May 1, 2000 - 28 Jan 2017.
Images
Less detail

Bennett's inhaler

https://mhc.andornot.com/en/permalink/artifact3298
Dates
1900
1930
circa 1900-1930
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997001116 a-d
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (…
  1 image  
Accession Number
997001116 a-d
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Administration, Intranasal -- instrumentation
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- inhaler
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (c,d) fit onto and over the ends of the tubes; the tips are both conical in shape with a hollow centre
Number Of Parts
4
Part Names
a - inhaler - Size: Length 13.4 cm x Width 2.9 cm x Depth 2.0 cm
b - cap - Size: Length 1.8 cm x Diam. 2.3 cm
c - tip - Size: Length 1.5 cm x Diam. 1.5 cm
d - tip - Size: Length 1.5 cm x Diam. 1.5 cm
Provenance
Originally owned by Dr. F. J. O'Connor; collected by Dr. A. A. Travill for the Queen's University Faculty of Medicine Collection
Maker
The J. F. Hartz Co.
Site Made (City)
Toronto
Site Made (State)
Ontario
Site Made (Country)
Canada
Dates
1900
1930
circa 1900-1930
Material
metal: silver
plastic: black
Inscriptions
(a) The outside of the cannister has the words, "HARTZ CO. // DETROIT - CLEVELAND // TORONTO // PAT. APPL'D FOR" stamped into the metal
Permanent Location
Storage Room 0010
0010-F2-1
Condition Remarks
The metal shows wear, but no corrosion is visible; the bakelite tips are complete and undamaged; #2: returned in same condition.
Copy Type
Original
Reference Types
Book
Document
Reference Comments
Previous number #182; Faculty of Medicine Collection 1984 Inventory; "Surgical Instruments," The Kny-Scheerer Co., 1915, p. 2001 (item B/-22); "Illustrated Catalog of A Complete Line of Standard Surgical Instruments," by Codman & Shurtleff Inc., c. 1920, p. 23 (item 1253)
Exhibit History
May 24 - Sept. 13, 2001: Agnes Etherington Art Centre Museopathy exhibit; Bracken Library Exhibit "Boning Up on Anatomy"; Sept 9, 2002-Sept. 29, 2003
Images
Less detail

Bennett's inhaler

https://mhc.andornot.com/en/permalink/artifact3299
Dates
1900
1930
circa 1900-1930
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997001117 a-d
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (…
  1 image  
Accession Number
997001117 a-d
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Administration, Intranasal -- instrumentation
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- inhaler
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (c,d) fit onto and over the ends of the tubes; the tips are both conical in shape with a hollow centre
Number Of Parts
4
Part Names
a - inhaler - Size: Length 13.4 cm x Width 2.8 cm x Depth 2.0 cm
b - cap - Size: Length 1.8 cm x Diam. 2.3 cm
c - tip - Size: Length 1.5 cm x Diam. 1.5 cm
d - tip - Size: Length 1.5 cm x Diam. 1.5 cm
Provenance
Originally owned by Dr. H.C. Mabee; collected by Dr. A.A. Travill for the Queen's University Faculty of Medicine Collection
Maker
The J.F. Hartz Co.
Site Made (City)
Toronto
Site Made (State)
Ontario
Site Made (Country)
Canada
Dates
1900
1930
circa 1900-1930
Material
metal: silver
plastic: black
Inscriptions
(a) The outside of the cannister has the words, "HARTZ CO. // DETROIT - CLEVELAND // TORONTO // PAT. APPL'D FOR" stamped into the metal
Permanent Location
Storage Room 0010
0010-F2-1
Condition Remarks
The metal shows wear, but no corrosion is visible; the bakelite tips are complete and undamaged, except for a very small chip missing from the outer tip edge of (a)
Copy Type
Original
Reference Types
Book
Document
Other
JPG
Reference Comments
Previous number #183; Faculty of Medicine Collection 1984 Inventory; "Surgical Instruments," The Kny-Scheerer Co., 1915, p. 2001 (item B/-22); "Illustrated Catalog of A Complete Line of Standard Surgical Instruments," by Codman & Shurtleff Inc., c. 1920, p. 23 (item 1253)
Images
Less detail

Bennett's inhaler

https://mhc.andornot.com/en/permalink/artifact3300
Dates
1900
1930
circa 1900-1930
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997001118 a-d
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (…
  1 image  
Accession Number
997001118 a-d
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Administration, Intranasal -- instrumentation
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- inhaler
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (c,d) fit onto and over the ends of the tubes; the tips are both conical in shape with a hollow centre
Number Of Parts
4
Part Names
a - inhaler - Size: Length 13.5 cm x Width 2.5 cm x Depth 2.0 cm
b - cap - Size: Length 1.9 cm x Diam. 2.2 cm
c - tip - Size: Length 1.5 cm x Diam. 1.5 cm
d - tip - Size: Length 1.5 cm x Diam. 1.5 cm
Provenance
Collected by Dr. A. A. Travill for the Queen's University Faculty of Medicine Collection
Dates
1900
1930
circa 1900-1930
Material
metal: silver
plastic: black
Inscriptions
(a) The outside of the cannister has the words, "// PAT. APPL'D FOR" stamped into the metal
Permanent Location
Storage Room 0010
0010-F2-1
Condition Remarks
The metal shows wear, but no corrosion is visible; the bakelite tips are complete and undamaged
Copy Type
Original
Reference Types
Book
Document
Other
JPG
Reference Comments
Previous number #184; Faculty of Medicine Collection 1984 Inventory; "Surgical Instruments," The Kny-Scheerer Co., 1915, p. 2001 (item B/-22); "Illustrated Catalog of a Complete Line of Standard Surgical Instruments," by Codman & Shurtleff Inc., c. 1920, p. 23 (item 1253)
Images
Less detail

anaesthetic inhaler

https://mhc.andornot.com/en/permalink/artifact3466
Dates
1901
1910
circa 1901-1910
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997001194 a-b
Description
Ethyl-chlorid anaesthetic inhaler, which consists of (a) a hollow cylindrical canister with a closed, rounded bottom and a rounded top; the top of the canister has an attached hollow cylindrical tube that has a small round open hole at the top with threading on its inner edges; there is a side holl…
  1 image  
Accession Number
997001194 a-b
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Administration, Intranasal -- instrumentation
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- inhaler
Description
Ethyl-chlorid anaesthetic inhaler, which consists of (a) a hollow cylindrical canister with a closed, rounded bottom and a rounded top; the top of the canister has an attached hollow cylindrical tube that has a small round open hole at the top with threading on its inner edges; there is a side hollow cylindrical tube off from the central tube; the side tube ends with a hollow, bulbous glass attachment with a very narrow cylindrical glass tube at its end; this glass tube has a pinhole opening at the end; a gauge pin (b) fits into the top of the central metal tube; the gauge pin is made of round flat metal with a solid cylindrical piece attached to the bottom; the cylindrical piece has threading on its outer edges.
Number Of Parts
2
Part Names
a - anaesthetic inhaler - Size: Length 14.1 cm x Width 4.1 cm x Depth 1.5 cm
b - gauge pin - Size: Length 2.3 cm x Diam. 1.5 cm
Provenance
Collected by Dr. A.A. Travill for the Queen's University Faculty of Medicine Collection
Maker
The G E Bauer Chemical Co.
Site Made (City)
Cleveland
Site Made (State)
Ohio
Site Made (Country)
United States of America
Dates
1901
1910
circa 1901-1910
Date Remarks
Pat. Feb. 1901, Oct. 1902
Material
metal: silver
glass: clear
Inscriptions
(a) The words, "G E BAUER'S ETHYL-CHLORID C.P. // THE G E BAUER CHEM. CO. CLEVELAND // PAT. FEB 1901, OCT. 1902" are stamped into the metal of the outside edge of the cannister
Permanent Location
Storage Room 0010
0010-F2-2
Condition Remarks
The metal shows minor wear; no staining or corrosion is visible; the glass is complete with no damage
Copy Type
Original
Reference Types
Document
Reference Comments
Previous number #285; Faculty of Medicine Collection 1984 Inventory
Images
Less detail
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Treatment, General
Accession Number
997001392 a-b
Description
Atomizer bottle (a) in a cardboard box (b); the atomizer bottle is glass and is narrow, cylindrical and hollow, with a flat, closed, round bottom; there is an outwardly rounded ridge in the glass, just below the neck; the neck tapers in and ends with a rounded open top; the neck is covered with a m…
  3 images  
Accession Number
997001392 a-b
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Treatment, General
MeSH Heading
Administration, Intranasal -- instrumentation
Respiratory Therapy
MM= Administration Drug, Inhalation
MM= Nebulizers and Vaporizers -- atomizer
Description
Atomizer bottle (a) in a cardboard box (b); the atomizer bottle is glass and is narrow, cylindrical and hollow, with a flat, closed, round bottom; there is an outwardly rounded ridge in the glass, just below the neck; the neck tapers in and ends with a rounded open top; the neck is covered with a metal cap--also with a round, open hole in the centre and threading on its inner edges; the bottle is stored in a 6-sided cardboard box that has flaps at the top and bottom; all sides of the box are flat and the outer edges have printing on them.
Number Of Parts
2
Part Names
a - atomizer bottle - Size: Length 11.0 x Diam. 3.3 cm
b - cardboard box - Size: Length 18.4 cm x Width 4.5 cm x Depth 4.5 cm
Provenance
Originally owned and used by Dr. F.X. O'Connor; donated by Miss Helen Cobb; collected by Dr. A.A. Travill for the Queen's University Faculty of Medicine Collection
Maker
The De Vilbiss Company
Site Made (City)
Toledo
Site Made (State)
Ohio
Site Made (Country)
United States of America
Material
metal: silver
glass: clear
cardboard: light green; cream; black
Inscriptions
(a) None; (b) the front and back of the box both read, "The // De Vilbiss // Company // TOLEDO // OHIO // MADE IN U.S.A."; the bottom of the box reads, "PRINTED IN U.S.A. // NO. 150 QB // CLEAR"
Permanent Location
Storage Room 0010
0010-E3-13
Condition Remarks
(a) The bottle appears to be unused; no stains, chips or scratches are visible in the glass; the metal is undamaged and shows no corrosion; (b) the cardboard box shows some wear; the top flap is partially missing; all printing is fully legible.
Copy Type
Original
Reference Types
Document
Book
JPG
Reference Comments
Previous number #713; Faculty of Medicine Collection 1984 Inventory; "Instruments and Equipment for Surgeons and Hospitals" by The Geo. P. Pilling & Son Company, 1932, p. 140 (very similar to item #P6808) (see attached photocopy); CD #5
Images
Less detail

protective coveralls

https://mhc.andornot.com/en/permalink/artifact8513
Dates
1980
1990
circa 1980-1990
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
Accession Number
1988.17.1
Description
Full adult size one piece white plastic disposable protective coveralls with white nylon front zip closure, hood with an elasticized edge, elasticized wrists, and integral booties; made of plasticized paper, shiny side out.
  1 image  
Accession Number
1988.17.1
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
MeSH Heading
Protective Clothing
Acquired Immunodeficiency Syndrome
Autopsy, instrumentation
Description
Full adult size one piece white plastic disposable protective coveralls with white nylon front zip closure, hood with an elasticized edge, elasticized wrists, and integral booties; made of plasticized paper, shiny side out.
Number Of Parts
1
Provenance
Acquired from the Academy of Medicine; source: Dr. George Davidson, neuropathologist at the Hospital for Sick Children, Toronto.
Site Made (Country)
Canada
Dates
1980
1990
circa 1980-1990
Material
plastic: white
nylon: white
Permanent Location
Storage Room 0009
0009
Dimension Notes
Length 1.73 m x Width 65.0 cm
Condition Remarks
Overalls creased because worn once for the purposes of photography; intended to be disposable.
Copy Type
Original
Research Facts
Dr. Davidson uses this kind of clothing for performing autopsies on AIDS victims; he describes the suit as being uncomfortable to wear because it prevents evaporation of perspiration; it builds up in the boots and can be heard "sloshing around" when the wearer moves; a shortened autopsy is performed on AIDS victims: care is taken not to pour--thereby spraying--body fluids; small samples are taken from the organs, which are not removed from the body.
Images
Less detail

Respirgard II Nebulizer

https://mhc.andornot.com/en/permalink/artifact8731
Dates
1990
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
Accession Number
1996.14.3 a-b
Description
Nebulizer; disposable plastic equipment with a graduated chamber 2cc-6cc attached to tubing from drug source, mouthpiece, and expiratory valve.
  1 image  
Accession Number
1996.14.3 a-b
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
MeSH Heading
Nebulizers and Vaporizers
Drug Therapy
Acquired Immunodeficiency Syndrome
Description
Nebulizer; disposable plastic equipment with a graduated chamber 2cc-6cc attached to tubing from drug source, mouthpiece, and expiratory valve.
Number Of Parts
2
Part Names
tubing
mouthpiece
Provenance
Acquired from the Academy of Medicine; transferred to Academy of Medicine from the Canadian Museum of Health and Medicine at the Toronto Hospital.
Site Made (Country)
United States of America
Dates
1990
Material
plastic: clear; dark blue
Permanent Location
Storage Room 0010
0010-E5-12
Condition Remarks
As new.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"Plague to AIDS: Lessons from Our Past 1990-92," p. 35; CD #UHN
Research Facts
Used for the aerosol administration of pentamidine to patients with AIDS.
Images
Less detail

24 records – page 1 of 3.