Skip header and navigation

Refine By

6 records – page 1 of 1.

Everseal anaesthesia mask, paediatric

https://mhc.andornot.com/en/permalink/artifact1928
Dates
1980
circa 1980
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008056
Description
MIE Everseal anaesthesia mask, which consists of a round rubber mount, with an open hole in the centre; the mount is attached to a convex-shaped neoprene-coated rubber body which has edges that turn up inside the mask; there is a yellow rubber manufacturer's label attached to the outside body of th…
  3 images  
Accession Number
997008056
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- rubber
Description
MIE Everseal anaesthesia mask, which consists of a round rubber mount, with an open hole in the centre; the mount is attached to a convex-shaped neoprene-coated rubber body which has edges that turn up inside the mask; there is a yellow rubber manufacturer's label attached to the outside body of the mask.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario, Canada.
Maker
Medical & Industrial Equipment
Site Made (City)
London
Site Made (Country)
England
Dates
1980
circa 1980
Date Remarks
Mask dates from the 1980's
Material
rubber: black; yellow
neoprene: black
Inscriptions
The manufacturer's label reads, "MIE // EVERSEAL // NEOPRENE COATED // ANTI-STATIC // REGISTERED DES. // MADE IN ENGLAND"; the mount has raised lettering which reads, "MEDICAL & INDUSTRIAL EQUIPMENT // LONDON ENGLAND"; the top of the outside body has the number "1" stamped on it
Permanent Location
Storage Room 0010
0010-F2-9
Dimension Notes
Length: 8.8 cm. x Width: 8.3 cm. x Depth: 5.6 cm.
Condition Remarks
The mask arrived dirty and dusty; the mount is complete and undamaged and still flexible; the neoprene-coated body is also complete and undamaged and is still flexible; #2 marking at lower outer edge--stuck to glass shelf while on display
Copy Type
Original
Reference Types
Person
Book
Reference Comments
Dr. Ray Matthews; similar to 997.008.055; "Ward's Anaesthetic Equipment", 3rd ed., by Andrew Davey, John T. B. Moyle and Crispian Ward, 1992, pp. 146-147
Exhibit History
On exhibit in Museum gallery - Anaesthesia exhibit, Oct. 2 1997-Nov. 2, 2001; returned to storage Dec. 17, 2001
Images
Less detail

Everseal anaesthesia mask

https://mhc.andornot.com/en/permalink/artifact1958
Dates
1980
circa 1980
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008086
Description
MIE Everseal anaesthesia mask, which consists of a round rubber mount, with an open hole in the centre; the mount is attached to a convex-shaped rubber body which has rounded edges that turn up inside the mask; there are two small yellow rubber manufacturer's labels at the top and bottom outside of…
Accession Number
997008086
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- rubber
Description
MIE Everseal anaesthesia mask, which consists of a round rubber mount, with an open hole in the centre; the mount is attached to a convex-shaped rubber body which has rounded edges that turn up inside the mask; there are two small yellow rubber manufacturer's labels at the top and bottom outside of the body.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario, Canada.
Maker
Medical & Industrial Equipment
Site Made (City)
London
Site Made (Country)
England
Dates
1980
circa 1980
Date Remarks
Mask dated from the 1980's
Material
rubber: black; yellow
Inscriptions
Raised letters on the mount read, "MEDICAL & INDUSTRIAL EQUIPMENT // LONDON ENGLAND"; the manufacturer's label at the top reads, "Everseal"; the manufacturer's label at the bottom reads, "ANTISTATIC // MIE // LTD // REGD. ["D" superscr. above "."] DES. No. 868449"
Permanent Location
Storage Room 0010
0010-F2-9
Dimension Notes
Length: 10.6 cm. x Width: 13.0 cm. x Depth: 8.5 cm.
Condition Remarks
The anaesthesia mask arrived dirty and dusty; the rubber has a number of cracks, especially at the bend at the edge; there are no missing sections and the rubber is still flexible; #2 no new damage
Copy Type
Original
Reference Types
Person
Book
Document
Reference Comments
Dr. Ray Matthews; "Ward's Anaesthetic Equipment", 3rd ed., by Andrew Davey, John T.B. Moyle and Crispian S. Ward, 1992, pp. 146-147; manufacturing information from MIE catalogue
Exhibit History
On exhibit in Museum gallery - Anaesthesia exhibit, Oct. 2 1997-Nov. 2, 2001; returned to storage Dec. 17, 2001
Less detail

rebreathing bag

https://mhc.andornot.com/en/permalink/artifact1981
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008109
Description
Anaesthetic rebreathing bag, which consists of a piece of oval-shaped hollow rubber, tapered at both ends; the bottom end is closed and pointed with a round rubber ring attached to it; the top end is open with a round rubber lip; the bag will inflate and hold air; manufacturing information is stamp…
  1 image  
Accession Number
997008109
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- gas bag
Description
Anaesthetic rebreathing bag, which consists of a piece of oval-shaped hollow rubber, tapered at both ends; the bottom end is closed and pointed with a round rubber ring attached to it; the top end is open with a round rubber lip; the bag will inflate and hold air; manufacturing information is stamped onto the front near the top in yellow lettering.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario, Canada.
Maker
Medical & Industrial Equipment
Site Made (Country)
United Kingdom
Material
rubber: black
Inscriptions
Lettering near the top front reads, "mie // CONDUCTIVE // BS 3353 // ISO 5362 // 2 LITRE // MADE IN // UNITED KINGDOM"; the bottom back reads, "059520"
Permanent Location
Storage Room 0010
0010-F2-2
Dimension Notes
Length: 11.8 cm. x Width: 32.2 cm. x Depth: 2.9 cm.
Condition Remarks
#1 The rubber has small cracks and a small tear at the top where the lip is; the rebreathing bag appears to never have been used and the rubber is very flexible; #2 after being on exhibit, the rubber deteriorated at the connection ring and broke apart; the bag and connection ring are now separated.
Copy Type
Original
Exhibit History
On exhibit in Museum gallery - Anaesthesia exhibit, Oct. 2 1997-Aug. 1999
Images
Less detail

rebreathing bag

https://mhc.andornot.com/en/permalink/artifact1982
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008110
Description
Anaesthetic rebreathing bag, which consists of a piece of oval-shaped hollow rubber, tapered at both ends; the bottom end is closed and pointed with a round rubber ring attached to it; the top end is open with a round rubber lip; the bag will inflate and hold air; manufacturing information is stamp…
  2 images  
Accession Number
997008110
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- gas bag
Description
Anaesthetic rebreathing bag, which consists of a piece of oval-shaped hollow rubber, tapered at both ends; the bottom end is closed and pointed with a round rubber ring attached to it; the top end is open with a round rubber lip; the bag will inflate and hold air; manufacturing information is stamped onto the front near the top in yellow lettering.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario, Canada.
Maker
Medical & Industrial Equipment
Site Made (Country)
United Kingdom
Material
rubber: black
Inscriptions
Lettering near the top front reads, "mie // CONDUCTIVE // BS 3353 // ISO 5362 // 2 LITRE // MADE IN // UNITED KINGDOM"; the bottom back reads, "019520"
Permanent Location
Storage Room 0010
0010-F2-2
Dimension Notes
Length: 11.9 cm. x Width: 32.8 cm. x Depth: 2.9 cm.
Condition Remarks
The rubber shows very tiny cracks near the top; there are no tears or large cracks and the rubber is very flexible; the rebreathing bag appears never to have been used; #2 mask deteriorated and broke off at the top end while on exhibit
Copy Type
Original
Exhibit History
On exhibit in Museum gallery - Anaesthesia exhibit, Oct. 2 1997-Oct. 24, 2001
Images
Less detail

rebreathing bag

https://mhc.andornot.com/en/permalink/artifact2005
Dates
1995
circa 1995
Collection
Kingston General Hospital Dept. of Anaesthesia Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997023003
Description
Anaesthetic rebreathing bag, which consists of a piece of oval-shaped hollow rubber, tapered at both ends; the bottom and sides are closed and there is a solid cylindrical piece with a rubber ring attached to it at the bottom; the top is open with a round rubber lip; the bag will inflate and hold a…
  1 image  
Accession Number
997023003
Collection
Kingston General Hospital Dept. of Anaesthesia Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
Respiration, Artificial
Description
Anaesthetic rebreathing bag, which consists of a piece of oval-shaped hollow rubber, tapered at
both ends; the bottom and sides are closed and there is a solid cylindrical piece with a rubber
ring attached to it at the bottom; the top is open with a round rubber lip; the bag will inflate
and hold air; manufacturing information is stamped onto the front, near the top, in yellow lettering
Number Of Parts
1
Provenance
Purchased by and used at the Kingston General Hospital, Kingston, Ontario, Canada
Maker
Medical & Industrial Equipment
Site Made (Country)
United Kingdom
Dates
1995
circa 1995
Date Remarks
Rebreathing was new in 1997
Material
rubber: black
Inscriptions
Lettering stamped onto the outside front, near the top, reads: "MIE // CONDUCTIVE // BS 3353 // ISO
5362 // 2 LITRE // MADE IN // UNITED KINGDOM."; the back near the bottom is stamped, "0595 20"
Permanent Location
Storage Room 0010
0010-F2-2
Dimension Notes
Length: 11.9 cm. x Width: 32.7 cm. x Depth: 3.0 cm.
Condition Remarks
#1 The rebreathing bag is new and has never been used; the rubber has no cracks or stains; #2 after being on exhibit, the rubber deteriorated at the connection ring and broke apart; the bag and the connection ring are now separated
Copy Type
Original
Reference Types
Person
JPG
Reference Comments
Dr. Ray Matthews; CD #2
Research Facts
This rebreathing bag was attached to anaesthesia machine (997.008.009) by Dr. Ray Matthews
Exhibit History
On exhibit in Museum gallery, Anaesthesia exhibit, Oct. 2 1997-Aug. 1999 (removed due to damage)
Images
Less detail

oxygen regulator

https://mhc.andornot.com/en/permalink/artifact4191
Dates
1980
1990
circa 1980-1990
Collection
Dr. Charles H. Bird / Dr. Godfrey Bird Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997037401
Description
Oxygen regulator has two chromium-plated brass gauges with glass covers; one gauge is graduated from 2 to 15 litres flow per min.; the second gauge is graduated from 0 to 3,000 lbs per square inch; plastic adjustment knob has knurled finger grip and automatic stop at on/off positions; adjustment kn…
  2 images  
Accession Number
997037401
Collection
Dr. Charles H. Bird / Dr. Godfrey Bird Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
Respiration
Description
Oxygen regulator has two chromium-plated brass gauges with glass covers; one gauge is graduated from 2 to 15 litres flow per min.; the second gauge is graduated from 0 to 3,000 lbs per square inch; plastic adjustment knob has knurled finger grip and automatic stop at on/off positions; adjustment knob connects to both gauges; metal fitting extends from rear of adjustment knob, terminating in a hexagonal bolt.
Number Of Parts
1
Provenance
Used by either Dr. H. Godfrey Bird or Dr. C. H. Bird of Gananoque, Ontario.
Maker
Linde
Dates
1980
1990
circa 1980-1990
Material
plastic: green; white
metal: silver
Inscriptions
The left-hand gauge has increment marks on the outer edge of the front and the numbers, "0 1000 2000 3000"; centre of the front of the gauge reads: "MADE IN U.S.A. // LB. PER SQ. IN. // USE NO OIL // Linde® // UNION // CARBIDE UL // LINDE COMPANY // OXYGEN"; the right-hand gauge also has increment lines and numbers on the outer edge of the front:"2 4 6 8 10 12 15"; centre reads, "MADE IN U.S.A. // LITERS PER MIN // USE NO OIL // OXYGEN"; top of plastic adjustment knob has embossed on it: "LINDE // TRADEMARK"; on back of central piece: "IM LINDE COMPANY [raised lettering] // UL FM [raised lettering] // MADE IN U.S.A. [raised lettering] // PATENTED R-513 [numbers stamped]"; attachment screw on back has the number "0" stamped in it.
Permanent Location
Storage Room 0010
0010-F2-4
Dimension Notes
Length 10.3 cm x Width 9.7 cm x Depth 8.8 cm
Condition Remarks
No apparent wear marks; ring holder on left-hand gauge is broken and no longer holds the glass in
Copy Type
Original
Reference Types
JPG
Reference Comments
CD #1
Images
Less detail

6 records – page 1 of 1.