Skip header and navigation

Refine By

   MORE

6 records – page 1 of 1.

Everseal facemask; anaesthesia mask

https://mhc.andornot.com/en/permalink/artifact1925
Dates
1980
circa 1980
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008053
Description
MIE Everseal anaesthesia mask, which consists of a round rubber mount, with an open hole in the centre; the mount is attached to a convex-shaped neoprene-coated rubber body which has edges that turn up inside the mask; there is a yellow rubber manufacturer's label on the outside body of the mask; t…
  1 image  
Accession Number
997008053
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- rubber
Description
MIE Everseal anaesthesia mask, which consists of a round rubber mount, with an open hole in the centre; the mount is attached to a convex-shaped neoprene-coated rubber body which has edges that turn up inside the mask; there is a yellow rubber manufacturer's label on the outside body of the mask; the mask was attached to valve 997.008.052, which was attached to hoses 997.008.050 and .051 and these were attached to anaesthesia machine 997.008.001 by Dr. Matthews.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario, Canada
Maker
Medical & Industrial Equipment Ltd.
Site Made (City)
London
Site Made (Country)
England
Dates
1980
circa 1980
Date Remarks
Mask dated from the 1980's
Material
rubber: black; yellow
neoprene: black
Inscriptions
The manufacturer's label reads, "MIE // EVERSEAL // NEOPRENE COATED // ANTI-STATIC // REGISTERED DES. // MADE IN ENGLAND"; the mount has raised lettering which reads, "MEDICAL & INDUSTRIAL EQUIPMENT LTD. // LONDON ENGLAND"; the number "4" can be seen at the top of the outside edge
Permanent Location
Storage Room 0009
0009-1
Dimension Notes
Length: 14.1 cm. x Width: 10.8 cm. x Depth: 8.1 cm.
Condition Remarks
The mask arrived dirty and dusty; the mount is complete and undamaged and still flexible; the neoprene-coated body has minor cracking visible all over the outside; the inside edge has one larger crack; #2 no new damage
Copy Type
Original
Reference Types
Person
Book
Document
Other
JPG
Reference Comments
Dr. Ray Matthews; see 997.008.001, .050-.052; "Ward's Anaesthetic Equipment", 3rd ed., by Andrew
Davey, John T.B. Moyle and Crispian Ward, 1992, pp. 146-147 (see attached photocopies); manufacturing
information from MIE catalogue (see attached photocopy); CD #5
Research Facts
Stored as part of 997008001.
Exhibit History
On exhibit in Museum gallery - Anaesthesia exhibit, Oct. 2 1997-Oct. 24, 2001
Images
Less detail

Everseal anaesthesia mask, paediatric

https://mhc.andornot.com/en/permalink/artifact1927
Dates
1980
circa 1980
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008055
Description
MIE Everseal anaesthesia mask, which consists of a round rubber mount, with an open hole in the centre; the mount is attached to a convex-shaped rubber body which has edges that turn up inside the mask; there are two small yellow rubber manufacturer's label on the outside body of the mask.
  1 image  
Accession Number
997008055
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- rubber
Description
MIE Everseal anaesthesia mask, which consists of a round rubber mount, with an open hole in the centre; the mount is attached to a convex-shaped rubber body which has edges that turn up inside the mask; there are two small yellow rubber manufacturer's label on the outside body of the mask.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario, Canada.
Maker
Medical & Industrial Equipment Ltd.
Site Made (City)
London
Site Made (Country)
England
Dates
1980
circa 1980
Date Remarks
Mask dates from the 1980's
Material
rubber: black; yellow
Inscriptions
The manufacturer's label at the top reads, "Everseal"; the manufacturer's label at the bottom of the mask reads, "ANTI-STATIC // MIE // LTD // REGP DES. No. 868449"; raised lettering on the mount reads, "MEDICAL & INDUSTRIAL EQUIPMENT // LONDON ENGLAND"
Permanent Location
Storage Room 0010
0010-F2-9
Dimension Notes
Length: 8.6 cm. x Width: 7.7 cm. x Depth: 6.4 cm.
Condition Remarks
The mask arrived dirty and dusty; the mount is complete and undamaged and still flexible; the body has minor cracking in the rubber throughout, but is complete and still flexible
Copy Type
Original
Reference Types
Person
Book
Reference Comments
Dr. Ray Matthews; similar to 997.008.056; "Ward's Anaesthetic Equipment", 3rd ed., by Andrew Davey,
John T.B. Moyle and Crispian Ward, 1992, pp. 146-149
Research Facts
This mask would have been used on a child
Images
Less detail

Everseal anaesthesia mask, paediatric

https://mhc.andornot.com/en/permalink/artifact1928
Dates
1980
circa 1980
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008056
Description
MIE Everseal anaesthesia mask, which consists of a round rubber mount, with an open hole in the centre; the mount is attached to a convex-shaped neoprene-coated rubber body which has edges that turn up inside the mask; there is a yellow rubber manufacturer's label attached to the outside body of th…
  3 images  
Accession Number
997008056
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- rubber
Description
MIE Everseal anaesthesia mask, which consists of a round rubber mount, with an open hole in the centre; the mount is attached to a convex-shaped neoprene-coated rubber body which has edges that turn up inside the mask; there is a yellow rubber manufacturer's label attached to the outside body of the mask.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario, Canada.
Maker
Medical & Industrial Equipment
Site Made (City)
London
Site Made (Country)
England
Dates
1980
circa 1980
Date Remarks
Mask dates from the 1980's
Material
rubber: black; yellow
neoprene: black
Inscriptions
The manufacturer's label reads, "MIE // EVERSEAL // NEOPRENE COATED // ANTI-STATIC // REGISTERED DES. // MADE IN ENGLAND"; the mount has raised lettering which reads, "MEDICAL & INDUSTRIAL EQUIPMENT // LONDON ENGLAND"; the top of the outside body has the number "1" stamped on it
Permanent Location
Storage Room 0010
0010-F2-9
Dimension Notes
Length: 8.8 cm. x Width: 8.3 cm. x Depth: 5.6 cm.
Condition Remarks
The mask arrived dirty and dusty; the mount is complete and undamaged and still flexible; the neoprene-coated body is also complete and undamaged and is still flexible; #2 marking at lower outer edge--stuck to glass shelf while on display
Copy Type
Original
Reference Types
Person
Book
Reference Comments
Dr. Ray Matthews; similar to 997.008.055; "Ward's Anaesthetic Equipment", 3rd ed., by Andrew Davey, John T. B. Moyle and Crispian Ward, 1992, pp. 146-147
Exhibit History
On exhibit in Museum gallery - Anaesthesia exhibit, Oct. 2 1997-Nov. 2, 2001; returned to storage Dec. 17, 2001
Images
Less detail

conductive anaesthesia mask, neonatal

https://mhc.andornot.com/en/permalink/artifact1948
Dates
1960
circa 1960
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008076
Description
Ohio anaesthesia mask for premature babies; the mask consists of a round open mount and convexshaped body with a flattened edge, all molded from a single piece of rubber; the top of the body has a metal-capped hollow cylindrical tube coming out and leading upwards.
  2 images  
Accession Number
997008076
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- rubber
Description
Ohio anaesthesia mask for premature babies; the mask consists of a round open mount and convexshaped body with a flattened edge, all molded from a single piece of rubber; the top of the body has a metal-capped hollow cylindrical tube coming out and leading upwards.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario, Canada.
Maker
Ohio Chemical & Surgical Equipment Co., a Division of Air Reduction Company Inc.
Site Made (City)
Madison
Site Made (State)
Wisconsin
Site Made (Country)
United States of America
Dates
1960
circa 1960
Date Remarks
Mask dated to the 1960's-1970's
Material
rubber: black
metal: silver
Inscriptions
Manufacturer's label on the left side of the mask reads, "PREMATURE // OHIO [enclosed in a diamond shape] // G ® // Ohio Chemical // CONDUCTIVE // UL ®[® placed beneath "U"]; the inside right has the letters, "BFB"
Permanent Location
Storage Room 0010
0010-F2-9
Dimension Notes
Length: 5.5 cm. x Width: 6.8 cm. x Depth: 5.1 cm.
Condition Remarks
The mask arrived dirty and dusty; the rubber shows some wear, but no cracks, tears or missing sections; the rubber is also still flexible; the metal is complete and undamaged; #2 no new damage
Copy Type
Original
Reference Types
Person
Document
Reference Comments
Dr. Ray Matthews, John Sikora; manufacturing information from 1964 Ohio catalogue (see attached photocopy)
Research Facts
The capped cylindrical tube was used to inflate the edges of the mask to get a good snug fit onto the patient's face
Exhibit History
On exhibit in Museum gallery - Anaesthesia exhibit, Oct. 2 1997-Nov. 2, 2001; returned to storage Dec. 17, 2001
Images
Less detail

anaesthesia mask

https://mhc.andornot.com/en/permalink/artifact1950
Dates
1950
circa 1950
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008078
Description
Ohio anaesthesia mask, which consists of a mount, body and edge molded from a single piece of rubber; the mount is round and open with a metal piece set inside and a thin rubber cover; the body is convex-shaped and the edges are rounded; the edge is molded so as to fit snugly over the patient's nos…
  2 images  
Accession Number
997008078
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- rubber
Description
Ohio anaesthesia mask, which consists of a mount, body and edge molded from a single piece of rubber; the mount is round and open with a metal piece set inside and a thin rubber cover; the body is convex-shaped and the edges are rounded; the edge is molded so as to fit snugly over the patient's nose and mouth; there is a cylindrical hollow round open section coming down from the mount and through the body; the body has four rounded hooked pieces coming off the top and bottom of both sides.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario, Canada.
Maker
Ohio Chemical & Surgical Equipment Co., a Division of Air Reduction Company Inc.
Site Made (City)
Madison
Site Made (State)
Wisconsin
Site Made (Country)
United States of America
Dates
1950
circa 1950
Date Remarks
Mask dates from the 1950's
Material
rubber: black
metal: silver
Inscriptions
The outside top of the mask has "100S // OHIO [inside a diamond shape] // GO" stamped into it; the left outside of the mask has, "AEH" stamped into it
Permanent Location
Storage Room 0010
0010-F2-9
Dimension Notes
Length: 10.1 cm. x Width: 12.8 cm. x Depth: 6.5 cm.
Condition Remarks
The mask arrived dirty and dusty; the rubber is cracked in several spots, but there are no missing sections; the metal piece is complete and undamaged; the valve is broken into three pieces
Copy Type
Original
Reference Types
Person
Document
Reference Comments
Dr. Ray Matthews, Dr. Valentinus "Nick" Nekus; manufacturing information from 1964 Ohio catalogue
Images
Less detail

Everseal anaesthesia mask

https://mhc.andornot.com/en/permalink/artifact1958
Dates
1980
circa 1980
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008086
Description
MIE Everseal anaesthesia mask, which consists of a round rubber mount, with an open hole in the centre; the mount is attached to a convex-shaped rubber body which has rounded edges that turn up inside the mask; there are two small yellow rubber manufacturer's labels at the top and bottom outside of…
Accession Number
997008086
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- rubber
Description
MIE Everseal anaesthesia mask, which consists of a round rubber mount, with an open hole in the centre; the mount is attached to a convex-shaped rubber body which has rounded edges that turn up inside the mask; there are two small yellow rubber manufacturer's labels at the top and bottom outside of the body.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario, Canada.
Maker
Medical & Industrial Equipment
Site Made (City)
London
Site Made (Country)
England
Dates
1980
circa 1980
Date Remarks
Mask dated from the 1980's
Material
rubber: black; yellow
Inscriptions
Raised letters on the mount read, "MEDICAL & INDUSTRIAL EQUIPMENT // LONDON ENGLAND"; the manufacturer's label at the top reads, "Everseal"; the manufacturer's label at the bottom reads, "ANTISTATIC // MIE // LTD // REGD. ["D" superscr. above "."] DES. No. 868449"
Permanent Location
Storage Room 0010
0010-F2-9
Dimension Notes
Length: 10.6 cm. x Width: 13.0 cm. x Depth: 8.5 cm.
Condition Remarks
The anaesthesia mask arrived dirty and dusty; the rubber has a number of cracks, especially at the bend at the edge; there are no missing sections and the rubber is still flexible; #2 no new damage
Copy Type
Original
Reference Types
Person
Book
Document
Reference Comments
Dr. Ray Matthews; "Ward's Anaesthetic Equipment", 3rd ed., by Andrew Davey, John T.B. Moyle and Crispian S. Ward, 1992, pp. 146-147; manufacturing information from MIE catalogue
Exhibit History
On exhibit in Museum gallery - Anaesthesia exhibit, Oct. 2 1997-Nov. 2, 2001; returned to storage Dec. 17, 2001
Less detail

6 records – page 1 of 1.