Skip header and navigation

Refine By

41 records – page 1 of 5.

Kinet-O-Meter anaesthesia machine

https://mhc.andornot.com/en/permalink/artifact1876
Dates
1945
circa 1945
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008004
Description
Kinet-O-meter anaesthesia machine which consists of two heavy cylindrical metal poles on a metal stand with four wheels; the top of one pole has two tank hook-ups each, for oxygen, nitrous oxide and carbon dioxide, with regulator on top; the top of the other pole has a hook-up for cyclopropane whic…
  4 images  
Accession Number
997008004
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- machine
Description
Kinet-O-meter anaesthesia machine which consists of two heavy cylindrical metal poles on a metal stand with four wheels; the top of one pole has two tank hook-ups each, for oxygen, nitrous oxide and carbon dioxide, with regulator on top; the top of the other pole has a hook-up for cyclopropane which leads to a panel with four flow meters (for nitrous oxide, cyclopropane, carbon dioxide and oxygen) in cc/liters per minute; the four flow meters lead back to the tank hook-ups by tubes; behind the flow meters, there is a blood pressure cuff manometer with a rubber tube which would originally have had a rubber bulb; a metal valve in the front was to be hooked up to the patient (via a soda lime absorber) to administer a mix of the four gases; the back of the machine has a wrench attached permanently by a metal chain, for turning on cylinders of gas.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario, Canada.
Maker
Ohio Chemical & Mfg. Co.
Site Made (City)
Minneapolis
Site Made (State)
Minnesota
Site Made (Country)
United States of America
Dates
1945
circa 1945
Date Remarks
Machine dates from the late 1940's to the early 1950's
Material
plastic: black; clear; blue; yellow; grey; green
rubber: black
metal: silver; yellow
Inscriptions
Label on the front of the machine reads, "HI-CO // THE HEIDBRINK CO. // MINNEAPOLIS MINNESOTA // MADE IN U.S.A. // DES. PAT. NO. 102,632"; a label under this reads, "AMERICAN [---]AL // ACCEPTED // COUNCIL // OF PHYSICAL // THERAPY"; a label under this reads, "HOTEL DIEU HOSPITAL // ASSET NO. 04026"; a manufacturer's label at the back reads, "LUNDY // ROCHESTER MODEL // HEIDBRINK // KINETO-METER // REG. U.S. PAT. OFF. // HEIDBRINK DIVISION OF // OHIO CHEMICAL & MFG CO. // MINNEAPOLIS MINN. // HI-CO // PAT. NO. 1,412,866 // PAT. NO. 1,802,601 // PAT. NO. 1,989,366 // PAT. NO. 2,073,372 // PAT. NO. 1,858,084 // OTHER PATS. APPL'D FOR // MADE IN U.S.A."
Permanent Location
Storage Room W1
W1-7-2
Dimension Notes
Length: 108.0 cm. x Width: 47.8 cm. x Depth: 61.2 cm.
Condition Remarks
The machine arrived very dirty and dusty; the pressure dials for the carbon dioxide and nitrous oxide gas hook-ups are very corroded; the plastic cover is missing for the carbon dioxide dial and broken and covered with a corrosion product for the nitrous oxide dial; the rubber hose on the main pressure dial is cracked in several spots; #2 no new damage
Copy Type
Original
Reference Types
Person
Document
Reference Comments
Dr. Ray Matthews and John Sikora; see photocopy of blood pressure manometer from 1964 Ohio catalogue; see photocopy of Tycos warranty
Research Facts
The four flow meter gauges at the front regulate the flow of nitrous oxide, cyclopropane, carbon dioxide and oxygen and were very inaccurate; carbon dioxide was used to stimulate patient respiration thus allowing quicker anaesthetizing; this model allows for two cylinders each of oxygen, nitrous oxide and carbon dioxide; this was an improvement over earlier models, as cylinders sometimes ran out of gas during operations; it was difficult to determine when the oxygen cylinder was empty and nitrous oxide pressure falls very quickly; with this model, if a tank ran dry, the patient could immediately be changed over to a full tank; another improvement was that the tanks were bigger than those in earlier models; the principle of this machine is the same as other machines in the same era; the regulators are single-stage regulators.
Exhibit History
On exhibit in Museum gallery, anaesthesia exhibit - Oct. 2 1997-Oct. 24, 2001
Images
Less detail

Heidbrink Kinet-O-Meter anaesthesia machine

https://mhc.andornot.com/en/permalink/artifact1886
Dates
1940
circa 1940
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008014 a-d
Description
(a) Heidbrink Kinet-O-Meter, Lundy Rochester Model anaesthesia machine, which consists of a rectangular green painted metal cabinet on four wheels; the front of the cabinet has a switch at the top and is divided into two halves; the right half has three pull-out (and removable) drawers - a fourth a…
Accession Number
997008014 a-d
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- machine
Description
(a) Heidbrink Kinet-O-Meter, Lundy Rochester Model anaesthesia machine, which consists of a rectangular green painted metal cabinet on four wheels; the front of the cabinet has a switch at the top and is divided into two halves; the right half has three pull-out (and removable) drawers - a fourth and top drawer is missing; the left half has a door which opens on hinges at the left; the space inside contains a pole which can be pulled out; a trilene absorber can be attached to the pole (as is 997.008.034a-d) and a plastic hose leads from this to the machine; the right side as two gauges for oxygen pressure and carbon dioxide pressure; the left side of the machine has three gas cylinder hook-ups, two for nitrous oxide and one for cyclopropane as well as a gauge to read the pressure of each has; at the back there is a reducing valve, and at the front is a hook-up for an absorber (though not one attached); the top of the machine has a set of four disc flowmeter gauges to read the flow of cyclopropane, nitrous oxide, carbon dioxide and oxygen; (b-d) three identical pull-out drawers with black plastic handles at the front; the inside base of the drawers is lined with green felt; these drawers fit into the right side of the machine cabinet.
Number Of Parts
4
Part Names
a - machine, anaesthesia - Size: Length 105.4 cm. x Width 64.8 cm. x Depth 40.9 cm.
b-d - drawers (x3) - Size: Length 16.8 cm. x Width 35.9 cm. x Depth 15.2 cm.
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario, Canada.
Maker
The Ohio Chemical & Mfg. Co.
Site Made (City)
Minneapolis
Site Made (State)
Minnesota
Site Made (Country)
United States of America
Dates
1940
circa 1940
Date Remarks
Machine dates from the 1940's to early 1950's
Material
plastic: black; clear; white
metal: silver; grey
paint: green
fabric: green
Inscriptions
A manufacturer's label on the top of the back reads, "LUNDY // ROCHESTER MODEL // HEIDBRINK // KINET-O-METER // REG. U.S. PAT. OFF. // HEIDBRINK DIVISION OF // THE OHIO CHEMICAL & MFG. CO. // MINNEAPOLIS, MINN // PAT. NO. 1,412,866 // PAT. NO. 1,989,366 // HI-CO // PAT. NO. 1,802,601 // PAT. NO. 2,073,372 // PAT. NO. 1,858,084 // OTHER PATS. APPL'D FOR // MADE IN U.S.A."; a small label below this reads, "HOTEL DIEU HOSPITAL // ASSET NO. 04024"; a metal switch on the front of the machine is stamped, "CIRCLE" on one side and "TO-FRO" on the other
Permanent Location
Storage Room 0009
0009-13-1
Condition Remarks
The machine arrived very dirty and dusty; most exposed metal parts show no corrosion, with the exception of the nitrous oxide pressure gauge, which has a green corrosion product and the plastic cover is also cracked; other plastic parts show no cracks or missing sections
Copy Type
Original
Reference Types
Person
Book
Other
Reference Comments
Dr. Ray Matthews; similar to 997.008.004; also see 997.008.034 a-c; "Understanding Anaesthesia Equipment -- Construction, Care and Complications" by Jerry A. Dorsch, M.D. and Susan E. Dorsch, M.D., 1975, p. 47
Research Facts
This machine mixed gases according to the doctor's instructions; this machine was used on children and adults for any type of surgery requiring anaesthesia; the disc flowmeter gauges were very inaccurate; the central switch could cause patient death if accidentally turned; this TO-FRO or CIRCLE switch could change the tubes leading to the patient from 1 to 2 (or the other way around, which could be fatal); the reducing valve reduced the pressure in the gas cylinder
Exhibit History
On exhibit in Museum gallery, anaesthesia exhibit - Oct. 2 1997-Feb. 1998
Less detail

soda lime absorber

https://mhc.andornot.com/en/permalink/artifact1899
Dates
1945
circa 1945
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008027
Description
Heidbrink two chamber soda lime absorber, which consists of a hollow cylindrical canister on a hollow cylindrical pole; the top of the absorber is held on by three screw on/off clamps; the top of the absorber has two valves with see-through plastic tops and outlet screw attachments at the side; the…
Accession Number
997008027
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- accessories -- absorber
Description
Heidbrink two chamber soda lime absorber, which consists of a hollow cylindrical canister on a hollow cylindrical pole; the top of the absorber is held on by three screw on/off clamps; the top of the absorber has two valves with see-through plastic tops and outlet screw attachments at the side; there is a central hook-up at the top front; the top left has a pressure dial in mm Hg; the back of the top has a paper warning label attached to it; the very top has a handle which switches chambers being used; Note: Item is missing..
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario, Canada.
Maker
The Ohio Chemical & Mfg. Co.
Site Made (City)
Minneapolis
Site Made (State)
Minnesota
Site Made (Country)
United States of America
Dates
1945
circa 1945
Date Remarks
Absorber dates from the late 1940's to early 1950's
Material
paper: off-white
metal: silver; brown
fabric: beige
plastic: clear
Inscriptions
The top of the absorber has a manufacturer's label which reads, "HEIDBRINK ABSORBER // PAT. NO. 2,136,244 // MADE IN U.S.A. // NO. 1 CHAMBER // NO. 2 CHAMBER // SHUT"; the central hook-up is stamped, "9716"; the pressure dial is labelled and can be set from "off" to "20"; the paper label reads, "IMPORTANT [underlined] Removed flutter valve discs once // every 30 to 60 days and clean // thoroughly to prevent sticking // THE OHIO CHEMICAL & MFG. CO. // Branches in all Principal Cities"; a small label at the back reads, "HOTEL DIEU HOSPITAL // ASSET NO. 04040"
Permanent Location
Storage Room 0007
0007-E2-3
Temporary Location
Item is missing. Possibly attached to other equipment
Dimension Notes
Length: 36.7 cm. x Width: 15.6 cm. x Depth: 17.0 cm.
Condition Remarks
The absorber arrived very dirty and dusty; the absorber shows wear, especially on the outside of the canister, but no active corrosion is visible; the paper label is very worn, but legible; the plastic pieces are complete and undamaged; #2 no new damage
Copy Type
Original
Reference Types
Person
Other
Reference Comments
Dr. Ray Matthews; see 997.008.004 for company location
Research Facts
Soda lime was put into the inside canister of the absorber to absorb expired carbon dioxide; the absorber would have been attached to an anaesthesia machine
Exhibit History
On exhibit in Museum gallery, anaesthesia exhibit - Oct. 2 1997-Oct. 24, 2001
Less detail

pivoting disc heart valve

https://mhc.andornot.com/en/permalink/artifact12147
Dates
1977
1978
circa 1977-1978
Collection
Kingston General Hospital Operating Room Collection
Category
Diagnostic & Treatment Artifacts
Classification
Cardiology
Accession Number
997034485 a-c
Description
Opened two piece plastic container for an unused Lillehei-Kaster pivoting disc heart valve prosthesis consisting of (a) aortic valve prosthesis, in inner container, including a loose orifice ring and a tilting disc, and aseptic transfer container (b) top and (c) bottom.
  2 images  
Accession Number
997034485 a-c
Collection
Kingston General Hospital Operating Room Collection
Category
Diagnostic & Treatment Artifacts
Classification
Cardiology
MeSH Heading
Heart Valve Prosthesis
Description
Opened two piece plastic container for an unused Lillehei-Kaster pivoting disc heart valve prosthesis consisting of (a) aortic valve prosthesis, in inner container, including a loose orifice ring and a tilting disc, and aseptic transfer container (b) top and (c) bottom.
Number Of Parts
3
Part Names
a - aortic valve prosthesis in inner container - Depth 5.0 cm x Diam 6.2 cm
b - aseptic transfer package-bottom portion - Depth 3.9 cm x Diam 8.2 cm
c - aseptic transfer package-top portion - Depth 4.5 cm x Diam 8.2 cm
Provenance
Used in KGH Operating Room
Maker
Medical Incorporated
Site Made (City)
Minneapolis
Site Made (State)
Minnesota
Site Made (Country)
United States of America
Dates
1977
1978
circa 1977-1978
Date Remarks
Printed on the back of device container.
Material
plastic: green, translucent, white
metal: silver
paper: green, white
ink: black, white, green
Inscriptions
Written on label affixed to top portion of aseptic transfer package: "LILLEHEI-KASTER // PIVOTING DISC HEART VALVE // CONTENTS: ONE EACH MODEL 300S AORTIC // SIZE 14A SP I. DIA. mm // TISSUE 19.0mm ANN. DIA. mm // SERIAL 36676 NUMBER"; "CONTENTS STERILE // STERILE LOT NO IV-77-151 // USE BEFORE DATE MY 1 - 1978 // "CONTENTS ARE STERILE UNLESS // PACKAGE HAS BEEN DAMAGED OR // PREVIOUSLY OPENED. // STORE PACKAGE IN A CLEAN DRY // ENVIRONMENT. // CAUTION: FEDERAL LAW (USA) // RESTRICTS THIS DEVICE TO SALE BY // OR ON THE ORDER OF A PHYSICIAN"; Embossed on top portion of aseptic transfer package: "LILLEHEI-KASTER PIVOTING DISC PROSTHETIC HEART VALVE"; "U.S. PATENT NO. 3.476.143"; Embossed on bottom portion of aseptic transfer package: "copyright 1973"; Embossed on inner container: "INSERT // VALVE HOLDER.REMOVE // VALVE AND DISPOSE OF CLIP // D-100-1163"
Permanent Location
Storage Room: 0010
0010-E6-4
Temporary Location
With MHC Education Program “Spare Parts” stored in Rm 2017
Condition Remarks
Original foam packaging piece attached to top is badly deteriorated.
Copy Type
Original
Reference Comments
Device instruction catalogue of a similar device.
Research Facts
Lillehei-Kaster aortic cardiac valve prothesis is intended for use in replacement of diseased or damaged heart valves, where a mechanical prosthesis is indicated.
Images
Less detail
Dates
1988
circa 1988
Collection
Medtronics Collection
Category
Diagnostic & Treatment Artifacts
Classification
Cardiology
Accession Number
000012001
Description
Pulse generator pacemaker.
  2 images  
Accession Number
000012001
Collection
Medtronics Collection
Category
Diagnostic & Treatment Artifacts
Classification
Cardiology
MeSH Heading
Pacemaker, Artificial
Cardiac Pacing, Artificial -- instrumentation
Cardiovascular Diseases -- therapy
Cardiology -- instrumentation
Description
Pulse generator pacemaker.
Number Of Parts
1
Provenance
Medtronics of Canada Ltd
Maker
Medtronics of Canada Ltd.
Site Made (City)
Minneapolis
Site Made (State)
Minnesota
Site Made (Country)
United States of America
Dates
1988
circa 1988
Date Remarks
Provided by manufacturer
Material
metal: silver
silicone: clear
Inscriptions
Engraved on body: "synergyst II 7071 // DDDR (ACTIVITY) // PULSE GENERATOR"; engraved on reverse: " DISPLAY MODEL // NOT FOR HUMAN USE"
Permanent Location
Storage Room 0010
0010-E6-3
Dimension Notes
Length: 6.0 cm x Width 6.0 cm x Depth 1.3 cm
Condition Remarks
Like new.
Copy Type
Original
Reference Types
JPG
Reference Comments
CD #1
Exhibit History
"Pacemakers: Technology Development"; Hotel Dieu Hospital, 14 Feb 2007
Images
Less detail
Dates
1997
circa 1997
Collection
Medtronics Collection
Category
Diagnostic & Treatment Artifacts
Classification
Cardiology
Accession Number
000012002
Description
Pacemaker.
  3 images  
Accession Number
000012002
Collection
Medtronics Collection
Category
Diagnostic & Treatment Artifacts
Classification
Cardiology
MeSH Heading
Pacemaker, Artificial
Cardiac Pacing, Artificial -- instrumentation
Cardiovascular Diseases -- therapy
Cardiology -- instrumentation
Description
Pacemaker.
Number Of Parts
1
Provenance
Medtronics of Canada Ltd
Maker
Medtronics of Canada Ltd.
Site Made (City)
Minneapolis
Site Made (State)
Minnesota
Site Made (Country)
United States of America
Dates
1997
circa 1997
Date Remarks
Provided by manufacturer
Material
metal: silver
silicone: clear
Inscriptions
Engraved on body: "Medtronic // Kappa TM // KDR401"; engraved on reverse: " DISPLAY MODEL // NOT FOR HUMAN USE"
Permanent Location
Storage Room 0010
0010-E6-3
Dimension Notes
Length: 5.4 cm x Width 4.6 cm x Depth 1.2 cm
Condition Remarks
Like new.
Copy Type
Original
Reference Types
JPG
Reference Comments
CD #1
Exhibit History
"Pacemakers: Technology Development"; Hotel Dieu Hospital, 14 Feb 2007
Images
Less detail
Dates
1990
circa 1990
Collection
Medtronics Collection
Category
Diagnostic & Treatment Artifacts
Classification
Cardiology
Accession Number
000012003
Description
Micro-pacemaker.
  3 images  
Accession Number
000012003
Collection
Medtronics Collection
Category
Diagnostic & Treatment Artifacts
Classification
Cardiology
MeSH Heading
Pacemaker, Artificial
Cardiac Pacing, Artificial -- instrumentation
Cardiovascular Diseases -- therapy
Cardiology -- instrumentation
Description
Micro-pacemaker.
Number Of Parts
1
Provenance
Medtronics of Canada Ltd
Maker
Medtronics of Canada Ltd.
Site Made (City)
Minneapolis
Site Made (State)
Minnesota
Site Made (Country)
United States of America
Dates
1990
circa 1990
Date Remarks
Provided by manufacturer
Material
metal: silver
silicone: clear
Inscriptions
Engraved on body: "MICRO // MINIX TM //8360"; engraved on reverse: " DISPLAY MODEL "
Permanent Location
Storage Room 0010
0010-E6-3
Dimension Notes
Length: 4.0 cm x Width 3.3 cm x Depth 0.7 cm
Condition Remarks
Like new.
Copy Type
Original
Reference Types
JPG
Reference Comments
CD #1
Exhibit History
"Pacemakers: Technology Development"; Hotel Dieu Hospital, 14 Feb 2007
Images
Less detail

implantable loop recorder

https://mhc.andornot.com/en/permalink/artifact11464
Dates
1990
1995
1990-1995
Collection
Medtronics Collection
Category
Diagnostic & Treatment Artifacts
Classification
Diagnosis, General
Accession Number
000012004 a-b
Description
Demo model of Reveal 9525 implantable loop recorder in paper cardboard box
  3 images  
Accession Number
000012004 a-b
Collection
Medtronics Collection
Category
Diagnostic & Treatment Artifacts
Classification
Diagnosis, General
MeSH Heading
Heart Conduction System -- instrumentation
Syncope
Description
Demo model of Reveal 9525 implantable loop recorder in paper cardboard box
Number Of Parts
2
Part Names
a - recorder - Size: Length: 6.2 cm x Width 2 cm x Depth 0.7 cm
b - box - Size: Length 9 cm x Width 6 cm x Depth 1.5 cm
Provenance
Medtronics of Canada Ltd
Maker
Medtronics of Canada Ltd.
Site Made (City)
Minneapolis
Site Made (State)
Minnesota
Site Made (Country)
United States of America
Dates
1990
1995
1990-1995
Date Remarks
Provided by manufacturer
Material
metal: silver
silicone: clear
Inscriptions
Engraved on body: "Reveal MODEL 9525 // MEDTRONIC, INC"
Permanent Location
Storage Room 0010
0010-E6-2
Condition Remarks
Like new.
Copy Type
Original
Reference Types
JPG
Reference Comments
CD #1
Research Facts
Information provided by manufacturer: "This device is simply inserted under the skin and is designed to diagnose syncope without using electrical leads. The monitor features a continuous looping memory that can record up to 42 minutes of the heart's electrical activity before and following a fainting episode. This information helps physicians determine the cause of the syncope. The Reveal was developed in Canada by Dr. George Klein at the London Health Sciences Centre and our engineers at Medtronics of Canada, and is now exported around the world."
Exhibit History
"Pacemakers: Technology Development"; Hotel Dieu Hospital, 14 Feb 2007
Images
Less detail
Dates
1990
circa 1990
Collection
Medtronics Collection
Category
Diagnostic & Treatment Artifacts
Classification
Cardiology
Accession Number
000012005
Description
Pacemaker.
  3 images  
Accession Number
000012005
Collection
Medtronics Collection
Category
Diagnostic & Treatment Artifacts
Classification
Cardiology
MeSH Heading
Pacemaker, Artificial
Cardiac Pacing, Artificial -- instrumentation
Cardiovascular Diseases -- therapy
Cardiology -- instrumentation
Description
Pacemaker.
Number Of Parts
1
Provenance
Medtronics of Canada Ltd
Maker
Medtronics of Canada Ltd.
Site Made (City)
Minneapolis
Site Made (State)
Minnesota
Site Made (Country)
United States of America
Dates
1990
circa 1990
Date Remarks
Provided by manufacturer
Material
metal: silver
silicone: clear
Inscriptions
Engraved on body: "ELITE // DDDR MODEL 7076"; engraved on reverse: " DISPLAY MODEL // NOT FOR HUMAN USE "
Permanent Location
Storage Room 0010
0010-E6-3
Dimension Notes
Length: 6.0 cm x Width 4.8 cm x Depth 0.1 cm
Condition Remarks
Like new.
Copy Type
Original
Reference Types
JPG
Reference Comments
CD #1
Images
Less detail
Dates
1989
circa 1989
Collection
Medtronics Collection
Category
Diagnostic & Treatment Artifacts
Classification
Cardiology
Accession Number
000012006
Description
Pacemaker.
  2 images  
Accession Number
000012006
Collection
Medtronics Collection
Category
Diagnostic & Treatment Artifacts
Classification
Cardiology
MeSH Heading
Pacemaker, Artificial
Cardiac Pacing, Artificial -- instrumentation
Cardiovascular Diseases -- therapy
Cardiology -- instrumentation
Description
Pacemaker.
Number Of Parts
1
Provenance
Medtronics of Canada Ltd
Maker
Medtronics of Canada Ltd.
Site Made (City)
Minneapolis
Site Made (State)
Minnesota
Site Made (Country)
United States of America
Dates
1989
circa 1989
Date Remarks
Provided by manufacturer
Material
metal: silver
silicone: clear
Inscriptions
Engraved on body: "Legend TM // SSIR MODEL 8419"; engraved on reverse: "DISPLAY MODEL // NOT FOR HUMAN USE"
Permanent Location
Storage Room 0010
0010-E6-3
Dimension Notes
Length: 5.6 cm x Width 4.4 cm x Depth 0.9 cm
Condition Remarks
Like new.
Copy Type
Original
Reference Types
JPG
Reference Comments
CD #1
Images
Less detail

41 records – page 1 of 5.