Skip header and navigation

Refine By

   MORE

45 records – page 1 of 5.

Moore type hip prosthesis 1¾"

https://mhc.andornot.com/en/permalink/artifact4975
Dates
1958
circa 1958
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
001002001 a-b
Description
Moore type hip prosthesis in a box; the prosthesis (a) consists of a spherical zimaloy (cobalt chromium alloy) femoral head that has an attached long triangular stem with two fenestrations at its wide end and a round hole through the metal at the base of the head; the shaft of the stem has smooth s…
  3 images  
Accession Number
001002001 a-b
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
Moore type hip prosthesis in a box; the prosthesis (a) consists of a spherical zimaloy (cobalt chromium alloy) femoral head that has an attached long triangular stem with two fenestrations at its wide end and a round hole through the metal at the base of the head; the shaft of the stem has smooth sides and a rounded outer edge; the top half of the sphere is reflective, while the other surfaces are dull in appearance; the prosthesis is stored in a plastic box (b); the box is rectangular in shape with a top hinged onto the bottom at the back and a clasp at the front to hold it closed; the inside of the box has insets at the top and bottom that are designed to hold the prosthesis securely; pieces of foam at the left side of the top and bottom of the box cushion the femoral head of the prosthesis.
Number Of Parts
2
Part Names
a - Moore hip prosthesis - Size: Length 17.6 cm x Width 6.1 cm x Depth 4.3 cm
b - box (closed) - Size: Length 26.9 cm x Width 9.5 cm x Depth 8.0 cm
Provenance
Used at Kingston General Hospital by Dr. Charles Sorbie
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1958
circa 1958
Material
metal: silver
plastic: blue
foam: cream
Inscriptions
(a) On one side of the stem is etched, "435 - 6M // 1¾ Z ["Z" enclosed in a circle] ZIMALOY"; (b) the label attached to the front of the box reads, "Z [inside a circle] // ZIMMER // U.S.A. // ZIMALOY // MOORE HIP PROSTHESIS // 4005 // 1¾"; raised lettering on the top and bottom of the box reads, "Z [inside circle] // ZIMMER // Warsaw, Indiana, U.S.A."
Permanent Location
Storage Room 0010
0010-E2-4
Condition Remarks
The hip prosthesis is unused and undamaged.
Copy Type
Original
Reference Types
Book
Person
JPG
Reference Comments
"Hospital and Physicians Equipment and Supplies," the J.F. Hartz Co., 1960, p. 98 (similar to item marked) (see attached photocopy); Dr. Charles Sorbie; CD #4.
Research Facts
This type of prosthesis was cast in two parts and has a hollow head; the fenestrations in the stem were to allow for bone growth around the prosthesis; the hole at the top was for a hook for removal; this type of prosthesis did not work too well.
Exhibit History
"Joint Ventures," Museum of Health Care, Nov. 19, 2001-Jan. 2013
Images
Less detail

Austin Moore type hip prosthesis 1¾"

https://mhc.andornot.com/en/permalink/artifact4976
Dates
1958
circa 1958
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
001002002
Description
Austin Moore type hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem with two fenestrations at its wide end and a round hole through the metal at the base of the head; the shaft of the stem has smooth sides and a slightly round…
  2 images  
Accession Number
001002002
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
Austin Moore type hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem with two fenestrations at its wide end and a round hole through the metal at the base of the head; the shaft of the stem has smooth sides and a slightly rounded outer edge; the sphere is reflective, while the stem is dull in appearance.
Number Of Parts
1
Provenance
Used at Kingston General Hospital by Dr. Charles Sorbie
Dates
1958
circa 1958
Material
metal: silver
Inscriptions
One side of the stem has "316L R ["R" enclosed in a square] 1¾" DIA. 2C396" etched into the metal.
Permanent Location
Storage Room 0010
0010-E2-4
Dimension Notes
Length 12.0 cm x Width 5.8 cm x Depth 3.8 cm
Condition Remarks
The metal shows a good deal of wear; there are several deep gouges, especially at the base of the head and the top of the stem; no corrosion is visible.
Copy Type
Original
Reference Types
Book
Person
JPG
Reference Comments
"Hospital and Physicians Equipment and Supplies," the J.F. Hartz Co., 1960, p. 98 (similar to item marked) (see attached photocopy); Dr. Charles Sorbie; CD #3
Research Facts
This type of prosthesis was cast in two parts and has a hollow head; the fenestrations in the stem were to allow for bone growth around the prosthesis; the hole at the top was for a hook for removal; this type of prosthesis did not work too well.
Images
Less detail

F.R. Thompson intramedullary hip prosthesis 1 5/8"

https://mhc.andornot.com/en/permalink/artifact4977
Dates
1958
circa 1958
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
001002003
Description
F.R. Thompson intramedullary hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem; the stem is made of solid metal with six smooth sides; the top ¾ of the sphere is reflective, while the other surfaces are dull in appearance.
  1 image  
Accession Number
001002003
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
F.R. Thompson intramedullary hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem; the stem is made of solid metal with six smooth sides; the top ¾ of the sphere is reflective, while the other surfaces are dull in appearance.
Number Of Parts
1
Provenance
Used at Kingston General Hospital by Dr. Charles Sorbie
Dates
1958
circa 1958
Material
metal: silver
Inscriptions
The numbers "1 5/8 // V - 1450" are etched into the metal at the base of the head; one side of the stem has, "CO CRO MO" etched into the metal.
Permanent Location
Storage Room 0010
0010-E2-5
Dimension Notes
Length 15.3 cm x Width 4.7 cm x Depth 3.7 cm
Condition Remarks
The metal shows minor wear only; no corrosion is visible.
Copy Type
Original
Reference Types
Book
Person
Other
JPG
Reference Comments
"Hospital and Physicians Equipment and Supplies," the J.F. Hartz Co., 1960, p. 98 (similar to item marked) (see attached photocopy); Dr. Charles Sorbie; similar to 001.002.004-.010; CD #3
Research Facts
This type of prosthesis has a hollow head; the sizes increase in 1/8" increments; this type of prosthesis was used almost exclusively for broken hips, when the femoral head was unlikely to servive due to loss of blood supply; this could be used with or without cement.
Images
Less detail

F.R. Thompson intramedullary hip prosthesis 44.5 m/m

https://mhc.andornot.com/en/permalink/artifact4978
Dates
1958
circa 1958
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
001002004
Description
F.R. Thompson intramedullary hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem; the stem is made of solid metal with six smooth sides; the top ¾ of the sphere is reflective, while the other surfaces are dull in appearance.
  2 images  
Accession Number
001002004
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
F.R. Thompson intramedullary hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem; the stem is made of solid metal with six smooth sides; the top ¾ of the sphere is reflective, while the other surfaces are dull in appearance.
Number Of Parts
1
Provenance
Used at Kingston General Hospital by Dr. Charles Sorbie
Maker
Francobal
Dates
1958
circa 1958
Material
metal: silver
Inscriptions
The metal at the base of the head has "H678A // FRANCOBAL '9' // 44.5 M/M" stamped into the metal.
Permanent Location
Storage Room 0010
0010-E2-5
Temporary Location
On display, Queen's University Department of Medicine third floor, August 20, 2013.
Dimension Notes
Length 16.2 cm x Width 4.7 cm x Depth 4.3 cm
Condition Remarks
The metal shows minor wear only; no corrosion is visible.
Copy Type
Original
Reference Types
Book
Person
Other
JPG
Reference Comments
"Hospital and Physicians Equipment and Supplies," the J.F. Hartz Co., 1960, p. 98 (similar to item marked) (see attached photocopy); Dr. Charles Sorbie; similar to 001.002.003, .005-.010; CD #4
Research Facts
This type of prosthesis has a hollow head; the sizes increase in 1/8" increments; this type of prosthesis was used almost exclusively for broken hips, when the femoral head was unlikely to servive due to loss of blood supply; this could be used with or without cement.
Images
Less detail

F.R. Thompson intramedullary hip prosthesis 1¾"

https://mhc.andornot.com/en/permalink/artifact4979
Dates
1958
circa 1958
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
001002005
Description
F.R. Thompson intramedullary hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem; the stem is made of solid metal with six smooth sides; the top ¾ of the sphere is reflective, while the other surfaces are dull in appearance.
  1 image  
Accession Number
001002005
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
F.R. Thompson intramedullary hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem; the stem is made of solid metal with six smooth sides; the top ¾ of the sphere is reflective, while the other surfaces are dull in appearance.
Number Of Parts
1
Provenance
Used at Kingston General Hospital by Dr. Charles Sorbie
Maker
Ladnu
Dates
1958
circa 1958
Material
metal: silver
Inscriptions
The base of the head has the word, "LADNU" stamped into the metal; one side of the stem has "6936 - 0 (1¾") 45 mm (V) // LADNU - 5" etched into the metal.
Permanent Location
Storage Room 0010
0010-E2-5
Dimension Notes
Length 16.2 cm x Width 4.7 cm x Depth 4.2 cm
Condition Remarks
The metal shows minor wear only; no corrosion is visible.
Copy Type
Original
Reference Types
Book
Person
Other
JPG
Reference Comments
"Hospital and Physicians Equipment and Supplies," the J.F. Hartz Co., 1960, p. 98 (similar to item marked) (see attached photocopy); Dr. Charles Sorbie; similar to 001.002.003, .004, .006-.010; CD #3
Research Facts
This type of prosthesis has a hollow head; the sizes increase in 1/8" increments; this type of prosthesis was used almost exclusively for broken hips, when the femoral head was unlikely to servive due to loss of blood supply; this could be used with or without cement.
Images
Less detail

F.R. Thompson intramedullary hip prosthesis 1 11/16"

https://mhc.andornot.com/en/permalink/artifact4980
Dates
1958
circa 1958
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
001002006
Description
F.R. Thompson intramedullary hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem; the stem is made of solid metal with six smooth sides; the top ¾ of the sphere is reflective, while the other surfaces are dull in appearance.
  1 image  
Accession Number
001002006
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
F.R. Thompson intramedullary hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem; the stem is made of solid metal with six smooth sides; the top ¾ of the sphere is reflective, while the other surfaces are dull in appearance.
Number Of Parts
1
Provenance
Used at Kingston General Hospital by Dr. Charles Sorbie
Dates
1958
circa 1958
Material
metal: silver
Inscriptions
One side of the stem has, "CO CRO MO 1 11/16" // U-2204" etched into the metal
Permanent Location
Storage Room 0010
0010-E2-5
Dimension Notes
Length 15.3 cm x Width 4.7 cm x Depth 3.9 cm
Condition Remarks
The metal shows minor wear only; no corrosion is visible.
Copy Type
Original
Reference Types
Book
Person
Other
JPG
Reference Comments
"Hospital and Physicians Equipment and Supplies," the J.F. Hartz Co., 1960, p. 98 (similar to item marked) (see attached photocopy); Dr. Charles Sorbie; similar to 001.002.003-.005, .007-.010; CD #3
Research Facts
This type of prosthesis has a hollow head; the sizes increase in 1/8" increments; this type of prosthesis was used almost exclusively for broken hips, when the femoral head was unlikely to servive due to loss of blood supply; this could be used with or without cement.
Images
Less detail

F.R. Thompson intramedullary hip prosthesis 1 13/16"

https://mhc.andornot.com/en/permalink/artifact4981
Dates
1958
circa 1958
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
001002007
Description
F.R. Thompson intramedullary hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem; the stem is made of solid metal with six smooth sides; the top ¾ of the sphere is reflective, while the other surfaces are dull in appearance.
  1 image  
Accession Number
001002007
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
F.R. Thompson intramedullary hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem; the stem is made of solid metal with six smooth sides; the top ¾ of the sphere is reflective, while the other surfaces are dull in appearance.
Number Of Parts
1
Provenance
Used at Kingston General Hospital by Dr. Charles Sorbie
Dates
1958
circa 1958
Material
metal: silver
Inscriptions
One side of the stem has, "CO CRO MO 1 13/16" // P-0590" etched into the metal
Permanent Location
Storage Room 0010
0010-E2-5
Dimension Notes
Length 15.3 cm x Width 5.2 cm x Depth 4.3 cm
Condition Remarks
The metal shows minor wear only; no corrosion is visible.
Copy Type
Original
Reference Types
Book
Person
Other
JPG
Reference Comments
"Hospital and Physicians Equipment and Supplies," the J.F. Hartz Co., 1960, p. 98 (similar to item marked) (see attached photocopy); Dr. Charles Sorbie; similar to 001.002.003-.006, .008-.010; CD #3
Research Facts
This type of prosthesis has a hollow head; the sizes increase in 1/8" increments; this type of prosthesis was used almost exclusively for broken hips, when the femoral head was unlikely to servive due to loss of blood supply; this could be used with or without cement.
Images
Less detail

F.R. Thompson intramedullary hip prosthesis 47.5 M/M

https://mhc.andornot.com/en/permalink/artifact4982
Dates
1958
circa 1958
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
001002008
Description
F.R. Thompson intramedullary hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem; the stem is made of solid metal with six smooth sides; the top ¾ of the sphere is reflective, while the other surfaces are dull in appearance.
  1 image  
Accession Number
001002008
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
F.R. Thompson intramedullary hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem; the stem is made of solid metal with six smooth sides; the top ¾ of the sphere is reflective, while the other surfaces are dull in appearance.
Number Of Parts
1
Provenance
Used at Kingston General Hospital by Dr. Charles Sorbie
Maker
Francobal
Dates
1958
circa 1958
Material
metal: silver
Inscriptions
The base of the head has, "H409A // FRANCOBAL 'S' // 47.5 M/M" stamped into the metal.
Permanent Location
Storage Room 0010
0010-E2-5
Dimension Notes
Length 16.1 cm x Width 5.0 cm x Depth 4.5 cm
Condition Remarks
The metal shows minor wear only; no corrosion is visible.
Copy Type
Original
Reference Types
Book
Person
Other
JPG
Reference Comments
"Hospital and Physicians Equipment and Supplies," the J.F. Hartz Co., 1960, p. 98 (similar to item marked) (see attached photocopy); Dr. Charles Sorbie; similar to 001.002.003-.007, .009, .010; CD #3
Research Facts
This type of prosthesis has a hollow head; the sizes increase in 1/8" increments; this type of prosthesis was used almost exclusively for broken hips, when the femoral head was unlikely to servive due to loss of blood supply; this could be used with or without cement.
Images
Less detail

F.R. Thompson intramedullary hip prosthesis 2"

https://mhc.andornot.com/en/permalink/artifact4983
Dates
1958
circa 1958
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
001002009
Description
F.R. Thompson intramedullary hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem; the stem is made of solid metal with six smooth sides; the top ¾ of the sphere is reflective, while the other surfaces are dull in appearance.
  1 image  
Accession Number
001002009
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
F.R. Thompson intramedullary hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem; the stem is made of solid metal with six smooth sides; the top ¾ of the sphere is reflective, while the other surfaces are dull in appearance.
Number Of Parts
1
Provenance
Used at Kingston General Hospital by Dr. Charles Sorbie
Dates
1958
circa 1958
Material
metal: silver
Inscriptions
The base of the head has, "2" // V-1957" etched into the metal; one side of the stem has, "CO CRO MO" etched into the metal.
Permanent Location
Storage Room 0010
0010-E2-5
Dimension Notes
Length 15.6 cm x Width 5.0 cm x Depth 4.6 cm
Condition Remarks
The metal shows minor wear only; no corrosion is visible.
Copy Type
Original
Reference Types
Book
Person
Other
JPG
Reference Comments
"Hospital and Physicians Equipment and Supplies," the J.F. Hartz Co., 1960, p. 98 (similar to item marked) (see attached photocopy); Dr. Charles Sorbie; similar to 001.002.003-.008, .010; CD #3
Research Facts
This type of prosthesis has a hollow head; the sizes increase in 1/8" increments; this type of prosthesis was used almost exclusively for broken hips, when the femoral head was unlikely to servive due to loss of blood supply; this could be used with or without cement.
Images
Less detail

F.R. Thompson intramedullary hip prosthesis 2 1/16"

https://mhc.andornot.com/en/permalink/artifact4984
Dates
1958
circa 1958
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
001002010
Description
F.R. Thompson intramedullary hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem; the stem is made of solid metal with six smooth sides; the top ¾ of the sphere is reflective, while the other surfaces are dull in appearance.
  1 image  
Accession Number
001002010
Collection
Dr. Charles Sorbie Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
F.R. Thompson intramedullary hip prosthesis, which consists of a spherical cobalt chromium alloy femoral head that has an attached long triangular stem; the stem is made of solid metal with six smooth sides; the top ¾ of the sphere is reflective, while the other surfaces are dull in appearance.
Number Of Parts
1
Provenance
Used at Kingston General Hospital by Dr. Charles Sorbie
Dates
1958
circa 1958
Material
metal: silver
Inscriptions
One side of the stem has, "CO CRO MO 2 1/16" // A-3181" etched into the metal
Permanent Location
Storage Room 0010
0010-E2-5
Dimension Notes
Length 16.1 cm x Width 5.1 cm x Depth 4.8 cm
Condition Remarks
The metal shows minor wear only; no corrosion is visible.
Copy Type
Original
Reference Types
Book
Person
Other
JPG
Reference Comments
"Hospital and Physicians Equipment and Supplies," the J.F. Hartz Co., 1960, p. 98 (similar to item marked) (see attached photocopy); Dr. Charles Sorbie; similar to 001.002.003-.009; CD #3
Research Facts
This type of prosthesis has a hollow head; the sizes increase in 1/8" increments; this type of prosthesis was used almost exclusively for broken hips, when the femoral head was unlikely to servive due to loss of blood supply; this could be used with or without cement.
Images
Less detail

45 records – page 1 of 5.