Skip header and navigation

Refine By

   MORE

636 records – page 1 of 64.

abdominal retractor

https://mhc.andornot.com/en/permalink/artifact3424
Dates
1934
circa 1934
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
Accession Number
997001153
Description
Abdominal retractor, which consists of a stainless steel instrument with a solid square metal bar onto which are attached two flattened arm pieces that curve outwards; the left arm piece is fixed to the bar, which the right arm piece can slide along the bar; a round screw at the end of the right si…
  1 image  
Accession Number
997001153
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
MeSH Heading
Appendectomy -- instrumentation
MM= Grasping and Fixating -- retractor -- abdominal
Description
Abdominal retractor, which consists of a stainless steel instrument with a solid square metal bar onto which are attached two flattened arm pieces that curve outwards; the left arm piece is fixed to the bar, which the right arm piece can slide along the bar; a round screw at the end of the right side of the bar prevents the right arm from sliding off the bar; there is a rounded blade at the end of each arm; the blades are made of very heavy cylindrical metal wire formed into an oval shape that has been bent to face forwards; the ends of the blades are rounded
Number Of Parts
1
Provenance
Collected by Dr. A.A. Travill for the Queen's University Faculty of Medicine Collection
Maker
Jetter & Scheerer
Site Made (Country)
Germany
Dates
1934
circa 1934
Date Remarks
Logo type used from 1934 onwards
Material
metal: silver
Inscriptions
The top of the right arm has the word "STAINLESS" and the Jetter & Scheerer logo of a snake twisted around a caduceus rod with a crown above it stamped into the metal; the top of the left arm has the words, "INGRAM & BELL // GERMANY" stamped into the metal; the top of the rod has the words, "Anatomy Dept." engraved into the metal; the bottom of the right arm has the word "Anatomy" engraved into the metal; both arms have the number "28" stamped into the metal at the inner edge, near the rod
Permanent Location
Storage Room 0010
0010-F1-6
Dimension Notes
Length 20.5 cm x Width 18.6 cm x Depth 6.6 cm
Condition Remarks
The metal shows minor wear only; no corrosion is visible
Copy Type
Original
Reference Types
Book
Document
Reference Comments
Previous number #249; Faculty of Medicine Collection 1984 Inventory; "Surgical Instruments Suction and Pressure Apparatus," The J. Sklar Mfg. Co., Inc., 1967, p. 202 (similar to item 310-335)
Research Facts
Used as a retractor for appendectomy surgery
Images
Less detail

abdominal retractor

https://mhc.andornot.com/en/permalink/artifact8059
Dates
1900
1950
1900-1950
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
Accession Number
1980.3.5
Description
Chrome handle and grip ends in a fenestrated, circular piece at right angles to the handle.
  1 image  
Accession Number
1980.3.5
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
MeSH Heading
MM= Grasping and Fixating -- retractor -- abdominal
Description
Chrome handle and grip ends in a fenestrated, circular piece at right angles to the handle.
Number Of Parts
1
Provenance
Acquired from the Academy of Medicine; source: Dr. Walter L. Percival of Windsor, Ont.
Maker
Trudell
Site Made (Country)
Germany
Dates
1900
1950
1900-1950
Material
metal: silver
Permanent Location
Storage Room 0010
0010-F1-6
Copy Type
Original
Images
Less detail
Dates
1923
1963
circa 1923-1963
Collection
Dr. C. M. Bracken Collection
Category
Diagnostic & Treatment Artifacts
Classification
Otolaryngology
Accession Number
993004256 a-b
Description
(a): Post-nasal instruments: metal Laforce adenotome, standard pattern size 2 with blade; (b): thin flexible stainless metal blade has perforations and curved end with attached shaped piece for attachment; from roll 993.004.252.
  2 images  
Accession Number
993004256 a-b
Collection
Dr. C. M. Bracken Collection
Category
Diagnostic & Treatment Artifacts
Classification
Otolaryngology
MeSH Heading
Adenoidectomy -- instrumentation
MM= Cutting Tool -- tome -- adenotome
Description
(a): Post-nasal instruments: metal Laforce adenotome, standard pattern size 2 with blade;
(b): thin flexible stainless metal blade has perforations and curved end with attached
shaped piece for attachment; from roll 993.004.252.
Number Of Parts
2
Part Names
a - adenotome - Size: Length 24.0 cm. x Width 5.5 cm. x Depth 1.8 cm.
b - extra blade - Size: Length 5.2 cm. x Width 1.6 cm. x Depth 0.6 cm.
Provenance
Belonged to Dr. C.M. Bracken
Maker
Ingram & Bell
Site Made (Country)
Germany
Dates
1923
1963
circa 1923-1963
Date Remarks
From Miltex catalogue.
Material
metal: silver
Inscriptions
(a): "INGRAM & BELL // 2 // 119 // GERMANY // CMB"; (b): "HASLAM // STAINLESS"
Permanent Location
Storage Room 0010
0010-E1-3
Condition Remarks
# 1: corrosion; # 2: no new damage
Reference Types
Book
JPG
Reference Comments
"Miltex Instrument Co. Illustrated Catalogue" #MX20-860 p. 230; CD #4
Images
Less detail

Adson tissue forceps

https://mhc.andornot.com/en/permalink/artifact6627
Dates
1890
circa 1890
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
Accession Number
1973.6.11
Description
Tweezer-like forceps with wide, serrated grasping surfaces, narrowing to tiny tips with v-shaped indentations.
  1 image  
Accession Number
1973.6.11
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
MeSH Heading
Dissection, instrumentation
MM= Grasping and Fixating -- forceps -- tissue
Description
Tweezer-like forceps with wide, serrated grasping surfaces, narrowing to tiny tips with v-shaped indentations.
Number Of Parts
1
Provenance
Acquired from the Academy of Medicine; source: Mrs. Kenneth E. Perfect for her husband, Dr. Kenneth E. Perfect.
Maker
Sklar
Site Made (Country)
Germany
Dates
1890
circa 1890
Material
metal: grey
Permanent Location
Storage Room 0010
0010-F1-16
Dimension Notes
Length 11.9 cm
Condition Remarks
Some striations due to wear.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
Aesculap catalogue, 1974, p. 76 (similar to item #BD511); CD #UHN
Research Facts
Assorted instruments from the office of the donor's late husband, Dr. Kenneth E. Perfect; a few, such as the stethoscope, may have belonged to his father.
Exhibit History
On exhibit at the Museum of Health Care in the East Gallery, small cases #1 and #2 - May 30, 2007 - March 9, 2009.
Images
Less detail

Albee bone graft calipers

https://mhc.andornot.com/en/permalink/artifact13245
Dates
1970
1980
circa 1970-1980
Collection
Kingston General Hospital Operating Room Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
997034612
Description
Albee bone graft calipers consist of two straight arms with dull tips; screw control attached through one arm connecting into the other arm with a circular connector with a small, circular grooved tip on the top.
  1 image  
Accession Number
997034612
Collection
Kingston General Hospital Operating Room Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Weights and Measures
Description
Albee bone graft calipers consist of two straight arms with dull tips; screw control attached through one arm connecting into the other arm with a circular connector with a small, circular grooved tip on the top.
Number Of Parts
1
Provenance
Used in the Kingston General Hospital O.R.
Maker
Richards
Site Made (Country)
Germany
Dates
1970
1980
circa 1970-1980
Date Remarks
Supplier's Catalogue
Material
metal: silver
Inscriptions
"[symbol that looks like an R enclosed in a box] 21-0061 GERMANY // STAINLESS" etched on the instrument.
Permanent Location
Storage Room 0010
0010-E2-3
Dimension Notes
Length 19.8 cm x Width 7.0 cm x Depth 1.9 cm
Condition Remarks
No stains, no corrosion
Copy Type
Original
Reference Types
Book
Reference Comments
"Surgical Instruments and Hospital Equipment," 23rd Ed., Downs Surgical PLC, ca. 1982, p. G-73 (similar to item GT-550-01-V)
Research Facts
This is used to measure bone for grafting or for Moore's femoral head replacement.
Images
Less detail
Dates
1920
1940
circa 1920-1940
Collection
Dr. Charles H. Bird / Dr. Godfrey Bird Collection
Category
Diagnostic & Treatment Artifacts
Classification
Clinical Laboratory Diagnosis
Accession Number
997037334
Description
Albuminometer, which is a long, cylindrical glass tube; the bottom tapers to a rounded and closed glass-filled point that extends from the base of the tube; the top has an open, flat rim around the tube opening; a white-filled graduated scale runs along the side of the tube.
  1 image  
Accession Number
997037334
Collection
Dr. Charles H. Bird / Dr. Godfrey Bird Collection
Category
Diagnostic & Treatment Artifacts
Classification
Clinical Laboratory Diagnosis
MeSH Heading
Urinalysis -- instrumentation
Albumins -- urine
Description
Albuminometer, which is a long, cylindrical glass tube; the bottom tapers to a rounded and closed glass-filled point that extends from the base of the tube; the top has an open, flat rim around the tube opening; a white-filled graduated scale runs along the side of the tube.
Number Of Parts
1
Provenance
Used by either Dr. C. H. Bird or by Dr. H. Godfrey Bird of Gananoque, Ontario.
Maker
AHT Co.
Site Made (Country)
Germany
Dates
1920
1940
circa 1920-1940
Material
glass: clear; white
Inscriptions
Etched into the glass in fancy script is the word "Albuminometer"; the company logo "AHT // CO" is located just above increment lines and etched into the glass are "R [script] // 26 // ml [script] // U [script] // 10 // 9 // 8 // 7 // 6 // 5 // 4 // 3 // 2 // 1"; the word "Germany" is etched into the tube in script
Permanent Location
Storage Room 0010
0010-F6-12
Dimension Notes
Length 16.5 cm x Diam. 2.2 cm
Condition Remarks
Tube is clean, with minor dirty scuff marks
Copy Type
Original
Reference Types
Book
Reference Comments
"Scientific Instruments Laboratory Apparatus and Supplies Catalog (JC-141)," Central Scientific Company of Canada, Toronto, 1942, p. 658 (similar to item # 43005)
Images
Less detail

Alexander bone gouge

https://mhc.andornot.com/en/permalink/artifact9302
Dates
1980
1990
circa 1990
Collection
Kingston General Hospital Operating Room Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
997034220
Description
Bone gouge, which is a straight, solid piece of metal the handle has four sides with rounded edges and a circular knob at the top; the blade is concave on the front and semicircular at the back; the tip is semicircular and sharp.
  1 image  
Accession Number
997034220
Collection
Kingston General Hospital Operating Room Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
MM= Cutting Tool -- chisel and gouge
Description
Bone gouge, which is a straight, solid piece of metal the handle has four sides with rounded edges and a circular knob at the top; the blade is concave on the front and semicircular at the back; the tip is semicircular and sharp.
Number Of Parts
1
Provenance
Used in the Kingston General Hospital Operating Room.
Maker
J. F. Hartz Co.
Site Made (Country)
Germany
Dates
1980
1990
circa 1990
Material
metal: silver
Inscriptions
"MADE IN GERMANY 4 9 mm THE J.G. HARTZ Co. CHROME"; has the Jetter & Scheerer logo of a snake twisted around a caduceus rod with a crown above it and "AESCULAP"above the crown all stamped into the metal.
Permanent Location
Storage Room 0010
0010-E2-12
Dimension Notes
Length 17.2 cm x Diam. 1.9 cm
Condition Remarks
No stains, no corrosion
Copy Type
Original
Reference Types
Book
Reference Comments
"General Surgical Catalogue," by Aesculap, 1982, p. 570 (similar to item #FL 345)
Research Facts
Used in orthopaedic surgery for tunnelling into the bone
Images
Less detail

Alexander's mastoid gouge

https://mhc.andornot.com/en/permalink/artifact5255
Dates
1934
circa 1934
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Otolaryngology
Accession Number
997001425
Description
Alexander's mastoid gouge, which consists of an instrument made from a single solid piece of metal; the main handle/shaft of the gouge is squared, with four flat sides and rounded corners; the gouge tapers slightly and rounds out to end with a semicircular, thin, sharp edge; the top has a concave g…
  2 images  
Accession Number
997001425
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Otolaryngology
MeSH Heading
MM= Cutting Tool -- chisel and gouge
Description
Alexander's mastoid gouge, which consists of an instrument made from a single solid piece of metal; the main handle/shaft of the gouge is squared, with four flat sides and rounded corners; the gouge tapers slightly and rounds out to end with a semicircular, thin, sharp edge; the top has a concave groove in the metal; the other end of the gouge flares out to form a thumbtack-like rounded end.
Number Of Parts
1
Provenance
Originally owned and used by Dr. F.X. O'Connor; donated by Miss Helen Cobb; collected by Dr. A.A. Travill for the Queen's University Faculty of Medicine Collection
Maker
Jetter & Scheerer
Site Made (Country)
Germany
Dates
1934
circa 1934
Date Remarks
Logo type used from 1934 onwards
Material
metal: silver
Inscriptions
One side of the handle/shaft has the Jetter & Scheerer logo of a snake twisted around a caduceus rod with a crown above, as well as, "KNY-SCHEERER // GERMANY // 1 // 6 // m/m" stamped into the metal.
Permanent Location
Storage Room 0010
0010-E3-7
Dimension Notes
Length 17.4 cm x Diam. 1.8 cm
Condition Remarks
The metal shows some wear; no corrosion is visible.
Copy Type
Original
Reference Types
Document
Book
Other
JPG
Reference Comments
Previous number #675; Faculty of Medicine Collection 1984 Inventory; "Surgical Instruments," by The Kny-Scheerer Company, 1915, p. 3056 (similar to item #C/-4430, 3) (see attached photocopy); came in instrument roll 997.001.423 with 23 other surgical instruments; one broken instrument not catalogued; CD #6
Images
Less detail

Alexander's mastoid gouge

https://mhc.andornot.com/en/permalink/artifact5256
Dates
1934
circa 1934
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Otolaryngology
Accession Number
997001426
Description
Alexander's mastoid gouge, which consists of an instrument made from a single solid piece of metal; the main handle/shaft of the gouge is squared, with four flat sides and rounded corners; the gouge tapers slightly and rounds out to end with a semicircular, thin, sharp edge; the top has a concave g…
  1 image  
Accession Number
997001426
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Otolaryngology
MeSH Heading
MM= Cutting Tool -- chisel and gouge
Description
Alexander's mastoid gouge, which consists of an instrument made from a single solid piece of metal; the main handle/shaft of the gouge is squared, with four flat sides and rounded corners; the gouge tapers slightly and rounds out to end with a semicircular, thin, sharp edge; the top has a concave groove in the metal; the other end of the gouge flares out to form a thumbtack-like rounded end.
Number Of Parts
1
Provenance
Originally owned and used by Dr. F.X. O'Connor; donated by Miss Helen Cobb; collected by Dr. A.A. Travill for the Queen's University Faculty of Medicine Collection
Maker
Jetter & Scheerer
Site Made (Country)
Germany
Dates
1934
circa 1934
Date Remarks
Logo type used from 1934 onwards
Material
metal: silver
Inscriptions
One side of the handle/shaft has the Jetter & Scheerer logo of a snake twisted around a caduceus rod with a crown above, as well as, "KNY-SCHEERER // GERMANY // 2 // 8 // m/m" stamped into the metal.
Permanent Location
Storage Room 0010
0010-E3-7
Dimension Notes
Length 17.4 cm x Diam. 1.7 cm
Condition Remarks
The metal shows some wear; no corrosion is visible.
Copy Type
Original
Reference Types
Document
Book
Other
JPG
Reference Comments
Previous number #675; Faculty of Medicine Collection 1984 Inventory; "Surgical Instruments," by The Kny-Scheerer Company, 1915, p. 3056 (similar to item #C/-4430, 4) (see attached photocopy); came in instrument roll 997.001.423 with 23 other surgical instruments; one broken instrument not catalogued; CD #6
Images
Less detail

Allen nasal applicator

https://mhc.andornot.com/en/permalink/artifact8327
Dates
1900
1999
1900-1999
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Otolaryngology
Accession Number
1984.14.5
Description
Hexagonal metal handle somewhat larger than the metal rod, which ends in a three-sided tip.
  1 image  
Accession Number
1984.14.5
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Otolaryngology
Description
Hexagonal metal handle somewhat larger than the metal rod, which ends in a three-sided tip.
Number Of Parts
1
Provenance
Acquired from the Academy of Medicine; source: Dr. W.J. Wilson; used by his father, Dr. J.P WIlson.
Maker
J.F. Hartz Co.
Site Made (Country)
Germany
Dates
1900
1999
1900-1999
Date Remarks
Original record had "20c."
Material
metal: grey
Permanent Location
Storage Room 0010
0010-E3-11
Dimension Notes
Length 17.8 cm
Condition Remarks
Tip is darkened as if by heat.
Copy Type
Original
Reference Types
JPG
Reference Comments
CD #UHN
Research Facts
Dr. J.P. Wilson graduated from U of T in 1911 and practised in Richmond Hill 1919-1967.
Images
Less detail

636 records – page 1 of 64.