Skip header and navigation

11 records – page 1 of 2.

Bunnell drill stock

https://mhc.andornot.com/en/permalink/artifact9799
Dates
1920
circa 1920
Collection
Kingston General Hospital Operating Room Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
997034276
Description
Metal drill with hollow cylindrical handle with diamond texture for gripping; attached to top of handle is a metal gear disc and drill handle; a long barrel attaches to the gear mechanism which flares to a wide cylindrical head; the head is adjustable via hidden threading to hold the drill bits; th…
  2 images  
Accession Number
997034276
Collection
Kingston General Hospital Operating Room Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Hand Injuries
Orthopedics
MM= Cutting Tool -- bone drill
Description
Metal drill with hollow cylindrical handle with diamond texture for gripping; attached to top of handle is a metal gear disc and drill handle; a long barrel attaches to the gear mechanism which flares to a wide cylindrical head; the head is adjustable via hidden threading to hold the drill bits; the barrel, while not hollow, is pierced lengthwise.
Number Of Parts
1
Provenance
Used in the KGH operating room.
Maker
Depuy
Site Made (City)
Hartford
Site Made (State)
Connecticut
Site Made (Country)
United States of America
Dates
1920
circa 1920
Date Remarks
Stainless steel used for surgical instruments from 1920 on.
Material
metal: silver
Inscriptions
"DEPUY" etched into top of instrument; "STAINLESS JACOBS CHUCK HARTFORD Conn USA No ["o" superscripted and underlined] OBM CAP-5/32 THD 5/16 - 24"stamped into the chuck..
Permanent Location
Storage Room 0010
0010-E2-6
Dimension Notes
Length 16.0 cm x Width 5.0 cm x Depth 14.0 cm
Condition Remarks
No staining, no corrosion; parts move freely
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"Surgical Instruments and Hospital Equipment," 23rd Ed., Downs Surgical PLC, ca. 1982, p. G-42 (similar to item GH-230-01-D) (see attached photocopy); CD #1
Research Facts
Designed especially for hand surgery and other areas where small bones are involved; for inserting guide wires.
Images
Less detail

cement restrictor inserter

https://mhc.andornot.com/en/permalink/artifact10930
Dates
1993
circa 1993
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
004029004
Description
A cement restrictor inserter; T shaped; consists of a handle which is made of a short metal shaft, and a long shaft which extends at 90 degrees from the handle with a threaded screw like end; calibrated in centimeters from 10 to 25.
  1 image  
Accession Number
004029004
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
A cement restrictor inserter; T shaped; consists of a handle which is made of a short metal shaft, and a long shaft which extends at 90 degrees from the handle with a threaded screw like end; calibrated in centimeters from 10 to 25.
Number Of Parts
1
Provenance
Used for hip replacement surgery at KGH.
Maker
Depuy
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1993
circa 1993
Date Remarks
Appears in a 1993 Depuy catalogue.
Material
metal: silver
Inscriptions
"Depuy 5460-02" printed on the handle.
Permanent Location
Storage Room 0010
0010-E2-9
Dimension Notes
Length 31.3 cm x Width 7.5 cm x Depth 1.2 cm
Condition Remarks
Some minor wear.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"DePuy Product Portfolio, Instruments," Warsaw, Indiana, 1993, p. 68 (see attached photocopy); CD #7
Research Facts
This device is used to position either the cement restrictor trials or implants at the distal end of the medullary canal; the screw at the end attaches to the threaded holes in 004.029.003.
Images
Less detail

cement restrictor trial set

https://mhc.andornot.com/en/permalink/artifact10929
Dates
1993
circa 1993
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
004029003 a-g
Description
A set of trial cement restrictors which are small cylindrical metal objects with screw holes on the tops and bottoms; each tapers slightly towards the top.
  1 image  
Accession Number
004029003 a-g
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
A set of trial cement restrictors which are small cylindrical metal objects with screw holes on the tops and bottoms; each tapers slightly towards the top.
Number Of Parts
7
Part Names
a - cement restrictor trial - Size: Length 1.7 cm x Diam. 0.7 cm
b - cement restrictor trial - Size: Length 1.8 cm x Diam. 0.9 cm
c - cement restrictor trial - Size: Length 2.1 cm x Diam. 1.1 cm
d - cement restrictor trial - Size: Length 2.1 cm x Diam. 1.4 cm
e - cement restrictor trial - Size: Length 2.1cm x Diam. 1.6 cm
f - cement restrictor trial - Size: Length 2.2 cm x Diam. 1.9 cm
g - cement restrictor trial - Size: Length 1.7 cm x Diam. 0.7 cm
Provenance
They were used for hip replacement surgery at KGH.
Maker
Depuy
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1993
circa 1993
Date Remarks
Appear in a 1993 Depuy catalogue.
Material
metal: silver
Inscriptions
Each device has a number from 1-7 printed on the bottom, increasing with size.
Permanent Location
Storage Room 0010
0010-E2-9
Condition Remarks
Like new.
Copy Type
Original
Reference Types
Book
Internet
JPG
Reference Comments
"DePuy Product Portfolio, Reconstructive Products," Warsaw, Indiana, 1993, p. 9 (see attached photocopy); "DePuy Product Portfolio, Instruments," Warsaw, Indiana, 1993, p. 68 (see attached photocopy).
"Internet: Isotis: Tissue Engineers"; CD #7
Research Facts
These devices are used for determining the proper fit for the real cement restrictors which would be used in hip replacement surgery to keep the cement from leaking down the femur shaft.
Images
Less detail

cup inserter/ impactor handle

https://mhc.andornot.com/en/permalink/artifact10931
Dates
1993
circa 1993
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
004029005
Description
A cup inserter/ impactor handle consisting of a handle made out of a compressed wood-grained resin product; extending from the handle is a curved shaft with a disc on the end with a screw in the centre; there is a traction handle attached to the shaft which extends back from the disc at about a 45 …
  2 images  
Accession Number
004029005
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
A cup inserter/ impactor handle consisting of a handle made out of a compressed wood-grained resin product; extending from the handle is a curved shaft with a disc on the end with a screw in the centre; there is a traction handle attached to the shaft which extends back from the disc at about a 45 degree angle.
Number Of Parts
1
Provenance
Used for hip replacement surgery at KGH.
Maker
Depuy
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1993
circa 1993
Date Remarks
Appears in a 1993 DePuy catalogue.
Material
metal: silver
resin (?): brown
Inscriptions
"D 2013-08" printed on the shaft.
Permanent Location
Storage Room 0010
0010-E2-9
Dimension Notes
Length 35.7 cm x Width 13.8 cm x Depth 8.9 cm
Condition Remarks
Some minor wear.
Copy Type
Original
Reference Types
Book
Person
JPG
Reference Comments
"DePuy Product Portfolio, Reconstruction Products," Warsaw, Indiana, 1993, p. 57 (see attached photocopy); Mary White; CD #7
Research Facts
This device was used with a cup impactor which screws on to the end to hold an implant securely into the acetabulum while the adhesive dried during hip replacement surgery.
Images
Less detail
Dates
1993
circa 1993
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
004029008
Description
An impactor consisting of a handle made out of a compressed wood-grained resin product with a bar extending out of it, then curving at about a 45 degree angle, then straightening again with a screw on the end.
  1 image  
Accession Number
004029008
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
An impactor consisting of a handle made out of a compressed wood-grained resin product with a bar extending out of it, then curving at about a 45 degree angle, then straightening again with a screw on the end.
Number Of Parts
1
Provenance
Used for hip replacement surgery at KGH.
Maker
Depuy
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1993
circa 1993
Date Remarks
A similar item appears in a 1993 DePuy catalogue.
Material
metal: silver
resin (?): brown
Inscriptions
"D 2013-00" printed on the metal.
Permanent Location
Storage Room 0010
0010-E2-9
Dimension Notes
Length 28.5 cm x Width 13.5 cm x Depth 2.6 cm
Condition Remarks
Some minor wear.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"DePuy Product Portfolio, Instruments," Warsaw, Indiana, 1993, p. 57 (see attached photocopy); CD #7
Research Facts
This device was used with a cup impactor which screws on to the end to hold an implant securely into the acetabulum while the adhesive dried during hip replacement surgery.
Images
Less detail
Dates
1993
circa 1993
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
004029007 a-b
Description
An inserter (a) consisting of a handle made out of a compressed wood-grained resin product; a curved shaft extends from the handle; at the end is a disc with a plastic half sphere (b) screwed onto it.
  2 images  
Accession Number
004029007 a-b
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
An inserter (a) consisting of a handle made out of a compressed wood-grained resin product; a curved shaft extends from the handle; at the end is a disc with a plastic half sphere (b) screwed onto it.
Number Of Parts
2
Part Names
a - inserter - Size: Length 36.7 cm x Width 4.5 cm x Depth 3.1 cm
b - half-sphere - Size: Depth 1.2 cm x Diam. 2.9 cm
Provenance
Used for hip replacement surgery at KGH.
Maker
Depuy
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1993
circa 1993
Date Remarks
Appears in a 1993 DePuy catalogue.
Material
metal: silver
resin?: brown
plastic: white
Inscriptions
"D 2138-00" printed on the shaft.
Permanent Location
Storage Room 0010
0010-E2-9
Condition Remarks
Some minor wear.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"DePuy Product Portfolio, Instruments," Warsaw, Indiana, 1993, p. 55 (see attached photocopy); CD #7
Research Facts
This device was used to hold an implant securely into the acetabulum while the adhesive dried during hip replacement surgery.
Images
Less detail
Dates
1993
circa 1993
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
004029006 a-b
Description
A poly impactor (a) consisting of a handle made out of a compressed wood-grained resin product; a straight shaft extends from the handle; at the end is a disc with a plastic sphere (b) screwed onto it.
  2 images  
Accession Number
004029006 a-b
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
A poly impactor (a) consisting of a handle made out of a compressed wood-grained resin product; a straight shaft extends from the handle; at the end is a disc with a plastic sphere (b) screwed onto it.
Number Of Parts
2
Part Names
a - impactor - Size: Length 37.7 cm x Diam. 3.1 cm
b - sphere - Size: Depth 2.8 cm x Diam. 3.1 cm
Provenance
Used for hip replacement surgery at KGH.
Maker
Depuy
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1993
circa 1993
Date Remarks
Appears in a 1993 DePuy catalogue.
Material
metal: silver
resin?: brown
plastic: white
Inscriptions
"D 2015-24" printed on the shaft.
Permanent Location
Storage Room 0010
0010-E2-9
Condition Remarks
Some minor wear.
Copy Type
Original
Reference Types
Book
Person
JPG
Reference Comments
"DePuy Product Portfolio, Reconstruction Products," Warsaw, Indiana, 1993, p. 38 (see attached photocopy); Mary White; CD #7
Research Facts
This device was used to hold an implant securely into the acetabulum while the adhesive dried during hip replacement surgery.
Images
Less detail

studded cup impactor

https://mhc.andornot.com/en/permalink/artifact10935
Dates
1993
circa 1993
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
004029009
Description
A 32mm studded cup impactor consisting of a disc with a bulb sticking out from it forming a half circle; there is a threaded hole on the bottom; there are two small studs on the disc outside of the bulb.
  1 image  
Accession Number
004029009
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
A 32mm studded cup impactor consisting of a disc with a bulb sticking out from it forming a half circle; there is a threaded hole on the bottom; there are two small studs on the disc outside of the bulb.
Number Of Parts
1
Provenance
Used for hip replacement surgery at KGH.
Maker
Depuy
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1993
circa 1993
Date Remarks
Appears in a 1993 DePuy catalogue.
Material
metal: silver
Inscriptions
"D 2020.32" printed on the metal.
Permanent Location
Storage Room 0010
0010-E2-9
Dimension Notes
Depth 2.3 cm x Diam. 4.5 cm
Condition Remarks
Some minor wear.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"DePuy Product Portfolio, Instruments," Warsaw, Indiana, 1993, p. 57 (see attached photocopy); CD #6
Research Facts
This device was used with an inserter which it screws on to, to hold an implant securely into the acetabulum while the adhesive dried during hip replacement surgery.
Images
Less detail

studded cup impactor

https://mhc.andornot.com/en/permalink/artifact10936
Dates
1993
circa 1993
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
004029010
Description
A 28 studded cup impactor consisting of a disc with a bulb sticking out from it forming a half circle; there is a threaded hole on the bottom; there are two small studs on the disc outside of the bulb.
  2 images  
Accession Number
004029010
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
A 28 studded cup impactor consisting of a disc with a bulb sticking out from it forming a half circle; there is a threaded hole on the bottom; there are two small studs on the disc outside of the bulb.
Number Of Parts
1
Provenance
Used for hip replacement surgery at KGH.
Maker
Depuy
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1993
circa 1993
Date Remarks
Appears in a 1993 DePuy catalogue.
Material
metal: silver
Inscriptions
"D 2020-28" printed on the metal.
Permanent Location
Storage Room 0010
0010-E2-9
Dimension Notes
Depth 2.2 cm x Diam. 4.5 cm
Condition Remarks
Some minor wear.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"DePuy Product Portfolio, Instruments," Warsaw, Indiana, 1993, p. 57 (see attached photocopy); CD #6
Research Facts
This device was used with an inserter which it screws on to, to hold an implant securely into the acetabulum while the adhesive dried during hip replacement surgery.
Images
Less detail

trial head for hip implant

https://mhc.andornot.com/en/permalink/artifact10937
Dates
1993
circa 1993
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
004029011
Description
A trial head for a hip implant; made out of white plastic; consists of a white plastic sphere with a stem on one side; there is a small hole on the top.
  2 images  
Accession Number
004029011
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
A trial head for a hip implant; made out of white plastic; consists of a white plastic sphere with a stem on one side; there is a small hole on the top.
Number Of Parts
1
Provenance
Used for hip replacement surgery at KGH.
Maker
Depuy
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1993
circa 1993
Date Remarks
Appears in a 1993 DePuy catalogue.
Material
plastic: white
Inscriptions
"28 // + 15.5" printed on the sphere
Permanent Location
Storage Room 0010
0010-E2-9
Dimension Notes
Length 3.4 cm x Diam. 2.8 cm
Condition Remarks
Some minor wear.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"DePuy Product Portfolio, Reconstructive Products," Warsaw, Indiana, 1993, p. 6 (see attached photocopy); CD #6.
Research Facts
This device was used to determine the proper fit for the real head.
Images
Less detail

11 records – page 1 of 2.