Skip header and navigation

Refine By

18 records – page 1 of 2.

cement restrictor inserter

https://mhc.andornot.com/en/permalink/artifact10930
Dates
1993
circa 1993
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
004029004
Description
A cement restrictor inserter; T shaped; consists of a handle which is made of a short metal shaft, and a long shaft which extends at 90 degrees from the handle with a threaded screw like end; calibrated in centimeters from 10 to 25.
  1 image  
Accession Number
004029004
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
A cement restrictor inserter; T shaped; consists of a handle which is made of a short metal shaft, and a long shaft which extends at 90 degrees from the handle with a threaded screw like end; calibrated in centimeters from 10 to 25.
Number Of Parts
1
Provenance
Used for hip replacement surgery at KGH.
Maker
Depuy
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1993
circa 1993
Date Remarks
Appears in a 1993 Depuy catalogue.
Material
metal: silver
Inscriptions
"Depuy 5460-02" printed on the handle.
Permanent Location
Storage Room 0010
0010-E2-9
Dimension Notes
Length 31.3 cm x Width 7.5 cm x Depth 1.2 cm
Condition Remarks
Some minor wear.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"DePuy Product Portfolio, Instruments," Warsaw, Indiana, 1993, p. 68 (see attached photocopy); CD #7
Research Facts
This device is used to position either the cement restrictor trials or implants at the distal end of the medullary canal; the screw at the end attaches to the threaded holes in 004.029.003.
Images
Less detail

cement restrictor trial set

https://mhc.andornot.com/en/permalink/artifact10929
Dates
1993
circa 1993
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
004029003 a-g
Description
A set of trial cement restrictors which are small cylindrical metal objects with screw holes on the tops and bottoms; each tapers slightly towards the top.
  1 image  
Accession Number
004029003 a-g
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
A set of trial cement restrictors which are small cylindrical metal objects with screw holes on the tops and bottoms; each tapers slightly towards the top.
Number Of Parts
7
Part Names
a - cement restrictor trial - Size: Length 1.7 cm x Diam. 0.7 cm
b - cement restrictor trial - Size: Length 1.8 cm x Diam. 0.9 cm
c - cement restrictor trial - Size: Length 2.1 cm x Diam. 1.1 cm
d - cement restrictor trial - Size: Length 2.1 cm x Diam. 1.4 cm
e - cement restrictor trial - Size: Length 2.1cm x Diam. 1.6 cm
f - cement restrictor trial - Size: Length 2.2 cm x Diam. 1.9 cm
g - cement restrictor trial - Size: Length 1.7 cm x Diam. 0.7 cm
Provenance
They were used for hip replacement surgery at KGH.
Maker
Depuy
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1993
circa 1993
Date Remarks
Appear in a 1993 Depuy catalogue.
Material
metal: silver
Inscriptions
Each device has a number from 1-7 printed on the bottom, increasing with size.
Permanent Location
Storage Room 0010
0010-E2-9
Condition Remarks
Like new.
Copy Type
Original
Reference Types
Book
Internet
JPG
Reference Comments
"DePuy Product Portfolio, Reconstructive Products," Warsaw, Indiana, 1993, p. 9 (see attached photocopy); "DePuy Product Portfolio, Instruments," Warsaw, Indiana, 1993, p. 68 (see attached photocopy).
"Internet: Isotis: Tissue Engineers"; CD #7
Research Facts
These devices are used for determining the proper fit for the real cement restrictors which would be used in hip replacement surgery to keep the cement from leaking down the femur shaft.
Images
Less detail
Dates
1950
1960
circa 1950-1960
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
998001002
Description
A moulded right forearm Colles aluminum splint; metal base has all over diamond-shaped cutouts; at the hand end the brace twists slightly with the edge of thin aluminum rolls over.
  1 image  
Accession Number
998001002
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Splints
External Fixators
Orthopedic Fixation Devices
Fracture Fixation -- instrumentation
Forearm Injuries
Description
A moulded right forearm Colles aluminum splint; metal base has all over diamond-shaped cutouts; at the hand end the brace twists slightly with the edge of thin aluminum rolls over.
Number Of Parts
1
Provenance
Kingston General Hospital
Dates
1950
1960
circa 1950-1960
Date Remarks
Based on suppliers' catalogues.
Material
metal: silver
Inscriptions
Imprinted into back: "z 20-08"
Permanent Location
Storage Room 0010
0010-E2-16
Dimension Notes
Length 27.0 cm x Width 10.0 cm x Depth 5.0 cm
Condition Remarks
Minor adhesive residue and scratches on the surface of arm brace.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
The concave arm brace has upturned sides that can be bent and fit around the human arm. Based on suppliers' catalogue: "Hospital & Physicians Equipment and Supplies," by J.F. Hartz Co., 1960, p. 121 (similar to item G); "A Comprehensive Guide to Purchasing," by V. Mueller and Company, Chicago, 1956, p. 369 (similar to item OS-10150); CD #2
Research Facts
Named for Abraham Colles (1773-1843), Professor of Surgery at the College of Surgeons in Dublin, Ireland, and who identified Colles' fracture of the wrist.
Images
Less detail

cup inserter/ impactor handle

https://mhc.andornot.com/en/permalink/artifact10931
Dates
1993
circa 1993
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
004029005
Description
A cup inserter/ impactor handle consisting of a handle made out of a compressed wood-grained resin product; extending from the handle is a curved shaft with a disc on the end with a screw in the centre; there is a traction handle attached to the shaft which extends back from the disc at about a 45 …
  2 images  
Accession Number
004029005
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
A cup inserter/ impactor handle consisting of a handle made out of a compressed wood-grained resin product; extending from the handle is a curved shaft with a disc on the end with a screw in the centre; there is a traction handle attached to the shaft which extends back from the disc at about a 45 degree angle.
Number Of Parts
1
Provenance
Used for hip replacement surgery at KGH.
Maker
Depuy
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1993
circa 1993
Date Remarks
Appears in a 1993 DePuy catalogue.
Material
metal: silver
resin (?): brown
Inscriptions
"D 2013-08" printed on the shaft.
Permanent Location
Storage Room 0010
0010-E2-9
Dimension Notes
Length 35.7 cm x Width 13.8 cm x Depth 8.9 cm
Condition Remarks
Some minor wear.
Copy Type
Original
Reference Types
Book
Person
JPG
Reference Comments
"DePuy Product Portfolio, Reconstruction Products," Warsaw, Indiana, 1993, p. 57 (see attached photocopy); Mary White; CD #7
Research Facts
This device was used with a cup impactor which screws on to the end to hold an implant securely into the acetabulum while the adhesive dried during hip replacement surgery.
Images
Less detail
Dates
1993
circa 1993
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
004029008
Description
An impactor consisting of a handle made out of a compressed wood-grained resin product with a bar extending out of it, then curving at about a 45 degree angle, then straightening again with a screw on the end.
  1 image  
Accession Number
004029008
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
An impactor consisting of a handle made out of a compressed wood-grained resin product with a bar extending out of it, then curving at about a 45 degree angle, then straightening again with a screw on the end.
Number Of Parts
1
Provenance
Used for hip replacement surgery at KGH.
Maker
Depuy
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1993
circa 1993
Date Remarks
A similar item appears in a 1993 DePuy catalogue.
Material
metal: silver
resin (?): brown
Inscriptions
"D 2013-00" printed on the metal.
Permanent Location
Storage Room 0010
0010-E2-9
Dimension Notes
Length 28.5 cm x Width 13.5 cm x Depth 2.6 cm
Condition Remarks
Some minor wear.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"DePuy Product Portfolio, Instruments," Warsaw, Indiana, 1993, p. 57 (see attached photocopy); CD #7
Research Facts
This device was used with a cup impactor which screws on to the end to hold an implant securely into the acetabulum while the adhesive dried during hip replacement surgery.
Images
Less detail
Dates
1993
circa 1993
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
004029007 a-b
Description
An inserter (a) consisting of a handle made out of a compressed wood-grained resin product; a curved shaft extends from the handle; at the end is a disc with a plastic half sphere (b) screwed onto it.
  2 images  
Accession Number
004029007 a-b
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
An inserter (a) consisting of a handle made out of a compressed wood-grained resin product; a curved shaft extends from the handle; at the end is a disc with a plastic half sphere (b) screwed onto it.
Number Of Parts
2
Part Names
a - inserter - Size: Length 36.7 cm x Width 4.5 cm x Depth 3.1 cm
b - half-sphere - Size: Depth 1.2 cm x Diam. 2.9 cm
Provenance
Used for hip replacement surgery at KGH.
Maker
Depuy
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1993
circa 1993
Date Remarks
Appears in a 1993 DePuy catalogue.
Material
metal: silver
resin?: brown
plastic: white
Inscriptions
"D 2138-00" printed on the shaft.
Permanent Location
Storage Room 0010
0010-E2-9
Condition Remarks
Some minor wear.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"DePuy Product Portfolio, Instruments," Warsaw, Indiana, 1993, p. 55 (see attached photocopy); CD #7
Research Facts
This device was used to hold an implant securely into the acetabulum while the adhesive dried during hip replacement surgery.
Images
Less detail
Dates
1993
circa 1993
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
004029006 a-b
Description
A poly impactor (a) consisting of a handle made out of a compressed wood-grained resin product; a straight shaft extends from the handle; at the end is a disc with a plastic sphere (b) screwed onto it.
  2 images  
Accession Number
004029006 a-b
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
A poly impactor (a) consisting of a handle made out of a compressed wood-grained resin product; a straight shaft extends from the handle; at the end is a disc with a plastic sphere (b) screwed onto it.
Number Of Parts
2
Part Names
a - impactor - Size: Length 37.7 cm x Diam. 3.1 cm
b - sphere - Size: Depth 2.8 cm x Diam. 3.1 cm
Provenance
Used for hip replacement surgery at KGH.
Maker
Depuy
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1993
circa 1993
Date Remarks
Appears in a 1993 DePuy catalogue.
Material
metal: silver
resin?: brown
plastic: white
Inscriptions
"D 2015-24" printed on the shaft.
Permanent Location
Storage Room 0010
0010-E2-9
Condition Remarks
Some minor wear.
Copy Type
Original
Reference Types
Book
Person
JPG
Reference Comments
"DePuy Product Portfolio, Reconstruction Products," Warsaw, Indiana, 1993, p. 38 (see attached photocopy); Mary White; CD #7
Research Facts
This device was used to hold an implant securely into the acetabulum while the adhesive dried during hip replacement surgery.
Images
Less detail

set of acetabular reamers

https://mhc.andornot.com/en/permalink/artifact10927
Dates
1982
circa 1982
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
004029001 a-g
Description
A set of seven acetabular reamers; each reamer consists of a metal shaft with an attachment to hook it onto a drill at one end, and five blades at the other arranged in a star pattern; each reamer increases in size by a factor of 4 millimeters.
  3 images  
Accession Number
004029001 a-g
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
A set of seven acetabular reamers; each reamer consists of a metal shaft with an attachment to hook it onto a drill at one end, and five blades at the other arranged in a star pattern; each reamer increases in size by a factor of 4 millimeters.
Number Of Parts
7
Part Names
a - reamer - Size: Length 20.8 cm x Diam. 4.2 cm
b - reamer - Size: Length 21.1 cm x Diam. 4.6 cm
c - reamer - Size: Length 21.3 cm x Diam. 5.0 cm
d - reamer - Size: Length 21.5 cm x Diam. 5.4 cm
e - reamer - Size: Length 21.5 cm x Diam. 5.8 cm
f - reamer - Size: Length 21.7 cm x Diam. 6.2 cm
g - reamer - Size: Length 21.5 cm x Diam. 6.6 cm
Provenance
They were used for hip replacement surgery at KGH.
Maker
BG
Dates
1982
circa 1982
Date Remarks
Similar reamers appear in a 1982 catalogue.
Material
metal: silver
Inscriptions
Each reamer has a number on one of the blades from "042" to "066" increasing in units of 4; each reamer has "BG" engraved on it.
Permanent Location
Storage Room 0010
0010-E2-9
Condition Remarks
Some very minor wear.
Copy Type
Original
Reference Types
Book
Internet
JPG
Reference Comments
"Surgical Instruments & Hospital Equipment," 23rd ed., Downs Surgical PLC, Surrey, ca. 1982, p. G20 (see attached photocopy);
Internet: "A Patient's Guide to Total Hip Replacement"; CD #7
Research Facts
These reamers are used to remove cartilage and bone from the acetabulum during hip replacement surgery making a rounded out hole for the prosthetic to be fitted into.
Images
Less detail

set of acetabular reamers

https://mhc.andornot.com/en/permalink/artifact10928
Dates
1982
circa 1982
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
004029002 a-f
Description
A set of six acetabular reamers; each reamer consists of a metal shaft with an attachment to hook it onto a drill at one end, and a half-sphere at the other with several small blades arranged on it.
  3 images  
Accession Number
004029002 a-f
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Orthopedic Equipment
Hip Prosthesis -- instrumentation
Description
A set of six acetabular reamers; each reamer consists of a metal shaft with an attachment to hook it onto a drill at one end, and a half-sphere at the other with several small blades arranged on it.
Number Of Parts
6
Part Names
a - reamer - Size: Length 25.6 cm x Diam. 4.2 cm
b - reamer - Size: Length 25.5 cm x Diam. 4.6 cm
c - reamer - Size: Length 25.7 cm x Diam. 5.0 cm
d - reamer - Size: Length 26.0 cm x Diam. 5.4 cm
e - reamer - Size: Length 26.2 cm x Diam. 5.8 cm
f - reamer - Size: Length 26.2 cm x Diam. 6.2 cm
Provenance
They were used for hip replacement surgery at KGH.
Maker
BG
Dates
1982
circa 1982
Date Remarks
Similar reamers appear in a 1982 catalogue.
Material
metal: silver
Inscriptions
Each reamer has a number on the shaft from "042" to "062" increasing in units of 4; each reamer has BG engraved on it.
Permanent Location
Storage Room 0010
0010-E2-9
Condition Remarks
Some very minor wear.
Copy Type
Original
Reference Types
Book
Internet
Person
JPG
Reference Comments
"Surgical Instruments & Hospital Equipment," 23rd ed., Downs Surgical PLC, Surrey, ca. 1982, p. G20 (see attached photocopy); "Internet: A Patient's Guide to Total Hip Replacement"; Mary White; CD #7
Research Facts
These reamers are used to create threaded grooves in a hole in a hip bone which had already been made by a more destructive blade (see 004. 029.001) for the implant to screw into.
Images
Less detail

Stryker cast cutter

https://mhc.andornot.com/en/permalink/artifact12014
Dates
1950
1960
1950-1960
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
998001001 a-b
Description
Stryker cast cutter comprises a cutting portion (a) saw blade, and (b) portable hand-held motor with a long electrical cord (65.0 cm).
  2 images  
Accession Number
998001001 a-b
Collection
Kingston General Hospital Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
MM= Cutting tool -- scissors/shears -- plaster
Description
Stryker cast cutter comprises a cutting portion (a) saw blade, and (b) portable hand-held motor with a long electrical cord (65.0 cm).
Number Of Parts
2
Part Names
a - saw blade - Size: Length 2.0 cm x Diam 6.0 cm
b - motor - Size: Length 26.0 cm x Width 8.0 cm x Depth 7.0 cm
Provenance
Used at KGH
Maker
Stryker Corporation
Site Made (City)
Kalamazoo
Site Made (State)
Michigan
Site Made (Country)
United States of America
Dates
1950
1960
1950-1960
Date Remarks
Based on suppliers' catalogues
Material
metal: silver
plastic: black, white, red
paint: grey
ink: black, red
Inscriptions
Printed on metal foil: " UL SA // KALAMAZOO, MICHIGAN, U.S.A // MODEL NO. 8380-210 SERIAL NO. // AMPS. 1.2 CYCLES 60/DC VOLTS 115-120 AC/DC // CAUTION--CUT CAST WITH AN UP AND DOWN MOTION // A LINEAR MOTION WILL CUT SKIN READ INSTRUCTIONS // NOT APPROVED FOR USE IN HAZARDOUS LOCATIONS."
Printed on a label tape affixed to metal foil:"OPD 571"
Printred on back of saw: " Stryker // 840-40-250"
Embossed on white plastic of power cabel: "TURN PULL // MADE IN U.S.A // AND"
Hand scratched into metal:"O.P.D // CLINIC"
Permanent Location
Storage Room 0010
0010-E2-14
Condition Remarks
Scratches and holes on cast cutter; Label tape affixed to the metal foil is detached.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"A Comprehensive Guide to Purchasing: Hospital -- Professional Instruments -- Equipment -- Supplies," V. Mueller & Co., 1956, p. 368 (item #OS-6200); CD #6.
Research Facts
Stryker cast cutter was used for cutting the rigid cast but not the padding or skin beneath.
Images
Less detail

18 records – page 1 of 2.