Skip header and navigation

Refine By

32 records – page 1 of 4.

clavicle straps

https://mhc.andornot.com/en/permalink/artifact4666
Dates
1960
circa 1960
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
Accession Number
000003113
Description
Clavicle straps consist of two canvas strips, each 3.5 cm wide, and 58 cm long; each strap is loose at one end and sewn to a central, short canvas strip at the other; 23 cm from the loose ends of each strap, a 35.5 cm-long piece of rectangular padding is sewn to each canvas strip; at the triangular…
  2 images  
Accession Number
000003113
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
Orthopedic Surgery
MeSH Heading
Splints
External Fixators
Orthopedic Fixation Devices
Fracture Fixation -- instrumentation
Description
Clavicle straps consist of two canvas strips, each 3.5 cm wide, and 58 cm long; each strap is loose at one end and sewn to a central, short canvas strip at the other; 23 cm from the loose ends of each strap, a 35.5 cm-long piece of rectangular padding is sewn to each canvas strip; at the triangular connection point between the canvas strips, three thin, fabric labels with blue printing are affixed; a single piece of canvas, 9 cm long, extends from the top of this connection point; another canvas strip 4.5 cm long is sewn across this end strip, securing two metal clips on either side; each clip is 4.5 cm long and consists of three triangular teeth, set on a rectangular bar, covered by a smooth, flat rectangular metal piece at the top, which is attached by a metal bracket on each side.
Number Of Parts
1
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Zimmer Manufacturing Co.
Site Made (City)
Warsaw
Site Made (State)
Indiana
Site Made (Country)
United States of America
Dates
1960
circa 1960
Date Remarks
Similar item identified in a 1960 catalogue
Material
metal: silver
fabric: cream
Inscriptions
On the flat outside edge of both clips, "PATENTED" is stamped into the metal; on the large outside label is, "Z [stylized and enclosed in a circle] // zimmer // WARSAW, IN 46580 // MEDIUM" printed in blue; on the back of this outside label, "WASHING // INSTRUCTIONS // HAND WASH OR // MACHINE WASH – // DELICATE CYCLE – // LUKEWARM WITH MILD // DETERGENT. DO NOT // USE BLEACH. TUMBLE // DRY – LOW HEAT // REV. 1/79 // B" is printed in blue; on the front of the middle, large label, the blue printing reads, "U.S. PATENT NO. // 3,338,236 // CANADIAN PAT. // 796,988 // UNITED KINGDOM PAT. // 1,107,833 // PATENTS IN OTHER // COUNTRIES"; on the front of the smallest label, the blue printing reads, "2031"
Permanent Location
Storage Room 0007
0007-V1-4 Box 3
Dimension Notes
Length 120.0 cm x Width 6.0 cm x Depth 3.0 cm
Condition Remarks
This artifact is incomplete; the loose ends of each strap have been cut, leaving the ends moderately frayed; blue dye from the label has stained the fabric at the crosspoint where the two straps are joined, on the outer side; there are no stains, and the metal clips show no signs of corrosion or wear.
Copy Type
Original
Reference Types
Book
Person
JPG
Reference Comments
Connie Cox, retired RN from KPH; "Hospital and Physicians Equipment and Supplies," the J.F. Hartz Co., 1960, p. 120 (similar to item 6-1B-OEC) (see attached photocopy); CD #4
Research Facts
Part of an "orthopedic clavicular cross splint" identified in 1960 catalogue; straps were once attached to an aluminum T-formed crosspiece to form an object similar to 997.037.102.
Images
Less detail

director and tongue tie

https://mhc.andornot.com/en/permalink/artifact5082
Dates
1923
circa 1923
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
Accession Number
000003330
Description
Director and tongue tie, which consists of a chrome-plated metal rod that is bent to form a groove that runs down one side of its length; the rod tapers at one end to form a rounded point, and flares at its other end to form a flat, butterfly shaped piece.
  2 images  
Accession Number
000003330
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
MeSH Heading
MM= Cutting Tool -- director -- general surgery
Description
Director and tongue tie, which consists of a chrome-plated metal rod that is bent to form a groove that runs down one side of its length; the rod tapers at one end to form a rounded point, and flares at its other end to form a flat, butterfly shaped piece.
Number Of Parts
1
Provenance
Used at the Kingston Psychiatric Hospital
Site Made (Country)
Germany
Dates
1923
circa 1923
Date Remarks
Chrome used after 1923
Material
metal: silver
Inscriptions
"J [inside a circle][logo] // MADE IN // GERMANY // CHROME" is stamped into the metal on one side of the butterfly handle.
Permanent Location
Storage Room 0010
0010-F1-13
Dimension Notes
Length 12.2 cm x Width 2.0 cm x Depth 0.4 cm
Condition Remarks
The butterfly handle showed minor signs of wear in the form of small scratches; there was no corrosion
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"Sklar Products Surgical Instruments Suction and Pressure Apparatus," 7th ed., J. Sklar Mfg. Co. Inc., 1967, p. 79 (similar to item #200-07) (see attached photocopy); CD #3
Research Facts
The logo on the actual artifact is different than the logo shown in the photocopy.
Images
Less detail

director and tongue tie

https://mhc.andornot.com/en/permalink/artifact5083
Dates
1920
circa 1920
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
Accession Number
000003331
Description
Director and tongue tie, which consists of a metal rod that is bent to form a groove that runs down one side of its length; the rod tapers at one end to form a rounded point, and flares at its other end to form a flat, butterfly shaped piece.
  1 image  
Accession Number
000003331
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
MeSH Heading
MM= Cutting Tool -- director -- general surgery
Description
Director and tongue tie, which consists of a metal rod that is bent to form a groove that runs down one side of its length; the rod tapers at one end to form a rounded point, and flares at its other end to form a flat, butterfly shaped piece.
Number Of Parts
1
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Sklar
Site Made (Country)
Germany
Dates
1920
circa 1920
Date Remarks
Stainless steel instruments used after 1920
Material
metal: silver
Inscriptions
"SKLAR // STAINLESS" is stamped into the metal on one side of the butterfly handle; "GERMANY" is stamped into the metal on the opposite side.
Permanent Location
Storage Room 0010
0010-F1-13
Dimension Notes
Length 12.4 cm x Width 1.9 cm x Depth 0.2 cm
Condition Remarks
The butterfly handle showed minor signs of wear in the form of scratches
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"Sklar Products Surgical Instruments Suction and Pressure Apparatus," 7th ed., J. Sklar Mfg. Co. Inc., 1967, p. 79 (similar to item #200-07) (see attached photocopy); CD #3
Images
Less detail

director and tongue tie

https://mhc.andornot.com/en/permalink/artifact5084
Dates
1923
circa 1923
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
Accession Number
000003332
Description
Director and tongue tie, which consists of a chrome-plated metal rod that is bent to form a groove that runs down one side of its length; the rod tapers at one end to form a slightly curving end with a rounded point, and flares at its other end to form a flat, butterfly shaped piece.
  1 image  
Accession Number
000003332
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
MeSH Heading
MM= Cutting Tool -- director -- general surgery
Description
Director and tongue tie, which consists of a chrome-plated metal rod that is bent to form a groove that runs down one side of its length; the rod tapers at one end to form a slightly curving end with a rounded point, and flares at its other end to form a flat, butterfly shaped piece.
Number Of Parts
1
Provenance
Used at the Kingston Psychiatric Hospital
Maker
J.F. Hartz Co.
Site Made (Country)
Germany
Dates
1923
circa 1923
Date Remarks
Chrome used after 1923
Material
metal: silver
Inscriptions
"J.F. HARTZ CO. // GERMANY // CHROME" is stamped into the metal on one side of the butterfly handle.
Permanent Location
Storage Room 0010
0010-F1-13
Dimension Notes
Length 15.4 cm x Width 1.7 cm x Depth 0.3 cm
Condition Remarks
The butterfly handle showed minor signs of wear in the form of scratches; the tapered tip was slightly bent and nicked
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"Sklar Products Surgical Instruments Suction and Pressure Apparatus," 7th ed., J. Sklar Mfg. Co. Inc., 1967, p. 79 (similar to item #200-07) (see attached photocopy); CD #3
Images
Less detail

director and tongue tie

https://mhc.andornot.com/en/permalink/artifact5085
Dates
1934
circa 1934
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
Accession Number
000003333
Description
Director and tongue tie, which consists of a metal rod that is bent to form a groove that runs down one side of its length; the rod tapers at one end to form a rounded point, and flares at its other end to form a flat, butterfly shaped piece.
  1 image  
Accession Number
000003333
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
MeSH Heading
MM= Cutting Tool -- director -- general surgery
Description
Director and tongue tie, which consists of a metal rod that is bent to form a groove that runs down one side of its length; the rod tapers at one end to form a rounded point, and flares at its other end to form a flat, butterfly shaped piece.
Number Of Parts
1
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Jetter & Scheerer
Site Made (Country)
Germany
Dates
1934
circa 1934
Date Remarks
Based on company's logo
Material
metal: silver
Inscriptions
"STAINLESS // INGRAM & BELL // GERMANY" is stamped into the metal on one side of the butterfly handle; on the opposite side is a circle with a diagonal line across it, stamped into the metal.
Permanent Location
Storage Room 0010
0010-F1-13
Dimension Notes
Length 14.3 cm x Width 1.7 cm x Depth 0.4 cm
Condition Remarks
The butterfly handle showed minor signs of wear in the form of small scratches
Copy Type
Original
Reference Types
Book
Other
JPG
Reference Comments
"Sklar Products Surgical Instruments Suction and Pressure Apparatus," 7th ed., J. Sklar Mfg. Co. Inc., 1967, p. 79 (similar to item #200-07) (see attached photocopy); similar to 000.003.334; CD #3
Research Facts
Ingram & Bell were the distributors
Images
Less detail

director and tongue tie

https://mhc.andornot.com/en/permalink/artifact5086
Dates
1934
circa 1934
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
Accession Number
000003334
Description
Director and tongue tie, which consists of a metal rod that is bent to form a groove that runs down one side of its length; the rod tapers at one end to form a rounded point, and flares at its other end to form a flat, butterfly shaped piece.
  1 image  
Accession Number
000003334
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
MeSH Heading
MM= Cutting Tool -- director -- general surgery
Description
Director and tongue tie, which consists of a metal rod that is bent to form a groove that runs down one side of its length; the rod tapers at one end to form a rounded point, and flares at its other end to form a flat, butterfly shaped piece.
Number Of Parts
1
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Jetter & Scheerer
Site Made (Country)
Germany
Dates
1934
circa 1934
Date Remarks
Based on company's logo
Material
metal: silver
Inscriptions
"STAINLESS // INGRAM & BELL // GERMANY" is stamped into the metal on one side of the butterfly handle; on the opposite side is a circle with a diagonal line across it, stamped into the metal.
Permanent Location
Storage Room 0010
0010-F1-13
Dimension Notes
Length 14.3 cm x Width 1.7 cm x Depth 0.4 cm
Condition Remarks
The butterfly handle showed minor signs of wear in the form of small scratches
Copy Type
Original
Reference Types
Book
Other
JPG
Reference Comments
"Sklar Products Surgical Instruments Suction and Pressure Apparatus," 7th ed., J. Sklar Mfg. Co. Inc., 1967, p. 79 (similar to item #200-07) (see attached photocopy); similar to 000.003.333; CD #3
Research Facts
Ingram & Bell were the distributors
Images
Less detail

director and tongue tie

https://mhc.andornot.com/en/permalink/artifact5087
Dates
1900
1934
circa 1900-1934
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
Accession Number
000003335
Description
Director and tongue tie, which consists of a metal rod that is bent to form a groove that runs down one side of its length; the rod tapers at one end to form a rounded point, and flares at its other end to form a flat, butterfly shaped piece; the portion of the rod nearing the tapered point has bee…
  2 images  
Accession Number
000003335
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
MeSH Heading
MM= Cutting Tool -- director -- general surgery
Description
Director and tongue tie, which consists of a metal rod that is bent to form a groove that runs down one side of its length; the rod tapers at one end to form a rounded point, and flares at its other end to form a flat, butterfly shaped piece; the portion of the rod nearing the tapered point has been bent to form a 90° curve.
Number Of Parts
1
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Kny Scheerer
Site Made (Country)
Germany
Dates
1900
1934
circa 1900-1934
Date Remarks
Based on company's logo
Material
metal: silver
Inscriptions
"KNY // SCHEERER // GERMANY" is stamped into the metal on one side of the butterfly handle
Permanent Location
Storage Room 0010
0010-F1-13
Dimension Notes
Length 24.6 cm x Width 2.9 cm x Depth 0.6 cm
Condition Remarks
The butterfly handle showed minor signs of wear; there was a white accretion in the groove of the tie nearest the butterfly end, 7.7 cm long
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"Sklar Products Surgical Instruments Suction and Pressure Apparatus," 7th ed., J. Sklar Mfg. Co. Inc., 1967, p. 79 (similar to item #200-07) (see attached photocopy); CD #3
Research Facts
Unlike the image in the catalogue, the end of this tie has been bent with use.
Images
Less detail

director and tongue tie, 5"

https://mhc.andornot.com/en/permalink/artifact4923
Dates
1920
circa 1920
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
Accession Number
000003311
Description
Director and tongue tie, which consists of a metal rod that ends in a sharp point at one end and flares to end in a flat, butterfly shaped piece at the other; the piece of metal forming the rod is folded almost in half to form a triangular shape, with two flat, metal sides and one open side.
  1 image  
Accession Number
000003311
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
MeSH Heading
MM= Cutting Tool -- director -- general surgery
Description
Director and tongue tie, which consists of a metal rod that ends in a sharp point at one end and flares to end in a flat, butterfly shaped piece at the other; the piece of metal forming the rod is folded almost in half to form a triangular shape, with two flat, metal sides and one open side.
Number Of Parts
1
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Sklar
Site Made (Country)
Germany
Dates
1920
circa 1920
Date Remarks
Based on the use of stainless steel for surgical instruments
Material
metal: silver
Inscriptions
Stamped into the metal of one side of the butterfly end, "SKLAR // STAINLESS"; on the opposite side, "GERMANY" is stamped into the metal.
Permanent Location
Storage Room 0010
0010-F1-13
Dimension Notes
Length 12.6 cm x Width 1.7 cm x Depth 0.4 cm
Condition Remarks
The director was slightly dusty; there was minor wear in the form of small scratches; there were no dents or signs of corrosion.
Copy Type
Original
Reference Types
Book
Other
JPG
Reference Comments
"Illustrations of Surgical Instruments of Superior Quality," by the Kny-Scheerer Co., ca. 1915, p. 2092 (similar to figure B/-2810-18) (see attached photocopy); see also 000.003.308 and .312; CD #4
Images
Less detail

director and tongue tie, 5"

https://mhc.andornot.com/en/permalink/artifact4924
Dates
1920
circa 1920
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
Accession Number
000003312
Description
Director and tongue tie, which consists of a metal rod that ends in a sharp point at one end and flares to end in a flat, butterfly shaped piece at the other; the piece of metal forming the rod is folded almost in half to form a triangular shape, with two flat, metal sides and one open side.
  1 image  
Accession Number
000003312
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
MeSH Heading
MM= Cutting Tool -- director -- general surgery
Description
Director and tongue tie, which consists of a metal rod that ends in a sharp point at one end and flares to end in a flat, butterfly shaped piece at the other; the piece of metal forming the rod is folded almost in half to form a triangular shape, with two flat, metal sides and one open side.
Number Of Parts
1
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Sklar
Site Made (Country)
Germany
Dates
1920
circa 1920
Date Remarks
Based on the use of stainless steel for surgical instruments
Material
metal: silver
Inscriptions
Stamped into the metal of one side of the butterfly end, "SKLAR // STAINLESS"; on the opposite side, "GERMANY" is stamped into the metal.
Permanent Location
Storage Room 0010
0010-F1-13
Dimension Notes
Length 12.6 cm x Width 1.7 cm x Depth 0.4 cm
Condition Remarks
The director was slightly dusty; there was minor wear in the form of small scratches; there were no dents or signs of corrosion.
Copy Type
Original
Reference Types
Book
Other
JPG
Reference Comments
"Illustrations of Surgical Instruments of Superior Quality," by the Kny-Scheerer Co., ca. 1915, p. 2092 (similar to figure B/-2810-18) (see attached photocopy); see also 000.003.308 and .311; CD #4
Images
Less detail

director and tongue tie, 18"

https://mhc.andornot.com/en/permalink/artifact4920
Dates
1934
circa 1934
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
Accession Number
000003308
Description
Director and tongue tie, which consists of a metal rod that ends in a point at one end and flares to end in a flat, butterfly shaped piece at the other; the piece of metal forming the rod is folded almost in half to form a triangular shape, with two flat, metal sides and one open side.
  1 image  
Accession Number
000003308
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Diagnostic & Treatment Artifacts
Classification
General Surgery
MeSH Heading
MM= Cutting Tool -- director -- general surgery
Description
Director and tongue tie, which consists of a metal rod that ends in a point at one end and flares to end in a flat, butterfly shaped piece at the other; the piece of metal forming the rod is folded almost in half to form a triangular shape, with two flat, metal sides and one open side.
Number Of Parts
1
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Kny-Scheerer
Site Made (Country)
Germany
Dates
1934
circa 1934
Date Remarks
Based on the form of the Kny-Scheerer logo.
Material
metal: silver
Inscriptions
Stamped into the metal of one side of the butterfly end, "KNY-SCHEERER // GERMANY // [logo: caduceus with a crown over the top]" appears.
Permanent Location
Storage Room 0010
0010-F1-13
Dimension Notes
Length 20.5 cm x Width 2.4 cm x Depth 0.5 cm
Condition Remarks
The metal showed signs of moderate wear in the form of small scratches and plate wear around some edges; there was no corrosion or dents.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"Illustrations of Surgical Instruments of Superior Quality," by the Kny-Scheerer Co., ca. 1915, p. 2092 (similar to figure B/-2810-18) (see attached photocopy); CD #4
Images
Less detail

32 records – page 1 of 4.