Skip header and navigation

Refine By

   MORE

21 records – page 1 of 3.

Dates
1920
circa 1920
Collection
Kingston General Hospital Operating Room Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
Accession Number
997034391
Description
A straight, hollow tube that curves 45° at the proximal end.
Accession Number
997034391
Collection
Kingston General Hospital Operating Room Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
MeSH Heading
Suction -- instrumentation
Bronchoscopy -- instrumentation
Esophagoscopy -- instrumentation
Description
A straight, hollow tube that curves 45° at the proximal end.
Number Of Parts
1
Provenance
Used in the KGH operating room
Maker
Pilling
Site Made (City)
Philadelphia
Site Made (State)
Pennsylvania
Site Made (Country)
United States of America
Dates
1920
circa 1920
Date Remarks
Stainless steel used for surgical instruments from 1920 on.
Material
metal: silver
Inscriptions
"PILLING - PHILA" stamped into the metal.
Permanent Location
Storage Room 0010
0010-E5-8
Dimension Notes
Length 40.8 cm x Diam. 1.0 cm
Condition Remarks
No stains; no corrosion.
Copy Type
Original
Reference Types
Book
Reference Comments
Pilling, George F. & Son Co., "Pilling Instruments and Equipment for Surgeons and Hospitals," Philadelphia, 1932, p. 100 (item #J2156) (see attached photocopy).
Research Facts
This tubing is used for aspirating secretions for diagnosis when doing a bronchoscopy or an esophagoscopy.
Less detail
Dates
1940
1960
circa 1940-1960
Collection
Kingston General Hospital Endoscopy Unit Collection
Category
Diagnostic & Treatment Artifacts
Classification
Diagnosis, General
Accession Number
994009022
Description
Stainless steel rigid-stem biopsy forceps with alligator jaws with 60.0 cm working length and "basket" to retain specimen; activated by a scissor grip
Accession Number
994009022
Collection
Kingston General Hospital Endoscopy Unit Collection
Category
Diagnostic & Treatment Artifacts
Classification
Diagnosis, General
MeSH Heading
Biopsy -- instrumentation
Bronchoscopy -- instrumentation
Endoscopy -- instrumentation
MM= Grasping and Fixating -- forceps -- endoscopic
Description
Stainless steel rigid-stem biopsy forceps with alligator jaws with 60.0 cm working length
and "basket" to retain specimen; activated by a scissor grip
Number Of Parts
1
Provenance
Used on KGH patients
Site Made (Country)
Germany
Dates
1940
1960
circa 1940-1960
Date Remarks
"Mueller & Co. (1956) Catalogue", #SU-1101, p. 504
Material
metal: silver
Inscriptions
"MEDICON // GERMANY // STAINLESS STEEL // 3 // SIU"
Permanent Location
Storage Room 0010
0010-F4-6
Dimension Notes
Length: 67.5 cm. x Width: 9.5 cm. x Depth: 0.5 cm.
Less detail
Dates
1890
circa 1890
Collection
Desmond Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
Accession Number
997016034
Description
Bronchoscope which consists of a long hollow cylindrical tube with an open bevelled tip and a round open viewing end; the bottom of the tube has a narrow hollow cylindrical section that runs the entire length of the tube; the viewing end has an attached hexagonal piece with a rounded flat handle co…
Accession Number
997016034
Collection
Desmond Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
MeSH Heading
Bronchoscopy -- instrumentation
Pulmonary Disease (Specialty) -- instrumentation
Lung Disease -- diagnosis
Description
Bronchoscope which consists of a long hollow cylindrical tube with an open bevelled tip and a round
open viewing end; the bottom of the tube has a narrow hollow cylindrical section that runs the entire
length of the tube; the viewing end has an attached hexagonal piece with a rounded flat handle
coming down from it, to create a handle; the top of the viewing end of the tube has a short hollow
cylindrical tube coming up and off from it, with a rounded and open end
Number Of Parts
1
Provenance
Owned by Dr. John Wilbur Desmond
Maker
The George P. Pilling & Son Co.
Site Made (City)
Philadelphia
Site Made (State)
Pennsylvania
Site Made (Country)
United States of America
Dates
1890
circa 1890
Date Remarks
Identified as being from the late 19th century to early 20th century by Dr. Desmond
Material
metal: dark grey
Inscriptions
The number "9" over the number "45" is stamped into both sides of the viewing end; the words, "PILLING-PHILA
// U.S.A." are stamped into the right side of the handle
Permanent Location
Storage Room 0010
0010-E5-8
Dimension Notes
Length: 45.0 cm. x Width: 9.9 cm. x Depth: 1.9 cm.
Condition Remarks
The bronchoscope arrived attached to a display board with wire and glue gun adhesive; the metal
shows minor wear and some tarnishing, but no corrosion
Copy Type
Original
Reference Types
Person
Book
Other
Reference Comments
Dr. John Desmond; "Pilling Instruments And Equipment For Surgeons And Hospitals" by The George P.
Pilling & Son Co., Philadelphia, Pennsylvania, 1932, pp. 88-89 (see attached photocopy); see also
997.016.033a,b and .036a,b
Research Facts
The hollow cylindrical section at the bottom of the main tube was likely for a light source similar
to that in 997.016.033b, and .036b; this was an aspirating bronchoscope
Less detail
Dates
1890
circa 1890
Collection
Desmond Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
Accession Number
997016035
Description
Bronchoscope which consists of a long hollow cylindrical tube with an open bevelled tip and a round open viewing end; the bottom of the tube has a narrow hollow cylindrical section that runs the entire length of the tube; there are two oval holes cut into the metal near the tip on both sides (for a…
Accession Number
997016035
Collection
Desmond Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
MeSH Heading
Bronchoscopy -- instrumentation
Pulmonary Disease (Specialty) -- instrumentation
Lung Disease -- diagnosis
Description
Bronchoscope which consists of a long hollow cylindrical tube with an open bevelled tip and a round
open viewing end; the bottom of the tube has a narrow hollow cylindrical section that runs the entire
length of the tube; there are two oval holes cut into the metal near the tip on both sides
(for a total of four holes); the viewing end has a hexagonal piece with a rounded flat handle coming
down from it to create a handle; the top of the viewing end of the tube has a short hollow cylindrical
tube coming up and off from it, with a rounded and open end
Number Of Parts
1
Provenance
Owned by Dr. John Wilbur Desmond
Maker
The George P. Pilling & Son Co.
Site Made (City)
Philadelphia
Site Made (State)
Pennsylvania
Site Made (Country)
United States of America
Dates
1890
circa 1890
Date Remarks
Identified as being from the late 19th century to early 20th century by Dr. Desmond
Material
metal: dark grey
Inscriptions
The number "8" over the number "40" is stamped into both sides of the viewing end; the words, "PILLING-PHILA
// U.S.A." are stamped into the right side of the handle
Permanent Location
Storage Room 0010
0010-E5-8
Dimension Notes
Length: 40.2 cm. x Width: 8.9 cm. x Depth: 2.0 cm.
Condition Remarks
The bronchoscope arrived attached to a display board with wire and glue gun adhesive; the metal
shows minor wear and some tarnishing, but no corrosion
Copy Type
Original
Reference Types
Person
Book
Other
Reference Comments
Dr. John Desmond; "Pilling Instruments And Equipment For Surgeons And Hospitals" by The George P.
Pilling & Son Co., Philadelphia, Pennsylvania, 1932, pp. 88-89 (see attached photocopies); see also
997.016.033a,b and .036a,b
Research Facts
The hollow cylindrical section at the bottom of the main tube was likely for a light source similar
to that in 997.016.033b, and .036b; this was an aspirating bronchoscope
Less detail
Dates
1890
circa 1890
Collection
Desmond Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
Accession Number
997016036 a-b
Description
Bronchoscope, with light attachment, which consists of (a) a long hollow cylindrical tube with an open bevelled tip and a round open viewing end; there are 5 oval holes cut into the metal near the tip, on the top and sides; the viewing end has a round piece with a rounded flat piece of metal coming…
Accession Number
997016036 a-b
Collection
Desmond Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
MeSH Heading
Bronchoscopy -- instrumentation
Pulmonary Disease (Specialty) -- instrumentation
Lung Disease -- diagnosis
Description
Bronchoscope, with light attachment, which consists of (a) a long hollow cylindrical tube with an
open bevelled tip and a round open viewing end; there are 5 oval holes cut into the metal near the
tip, on the top and sides; the viewing end has a round piece with a rounded flat piece of metal coming
down from it to create a handle; the top of the viewing end has a short hollow cylindrical tube
coming up and off from it, with a rounded and open end; the bottom of the main tube has a narrow
hollow cylindrical section that runs the entire length of the tube, into which (b) fits; (b) a
light attachment consisting of a long narrow cylindrical metal tube with a small rounded glass and
metal light bulb at the tip; the other end has a cylindrical metal handle with a square metal piece
near the top that has a short cylindrical rod coming from it; this rod fits into a corresponding
hole in the handle of the bronchoscope
Number Of Parts
2
Part Names
a - bronchoscope - Size: Length 31.2 cm. x Width 8.9 cm. x Depth 1.5 cm.
b - light - Size: Length 30.4 cm. x Width 3.5 cm. x Depth 0.7 cm.
Provenance
Owned by Dr. John Wilbur Desmond
Maker
The George P. Pilling & Son Co.
Site Made (City)
Philadelphia
Site Made (State)
Pennsylvania
Site Made (Country)
United States of America
Dates
1890
circa 1890
Date Remarks
Identified as being from the late 19th century to early 20th century by Dr. Desmond
Material
metal: silver; grey; yellow
glass: clear
Inscriptions
(a) The viewing end of the bronchoscope has the words "PILLING-PHILA. // 4" stamped into it; the
left side of the handle has, "PILLING PHILA."
Permanent Location
Storage Room 0010
0010-E5-8
Condition Remarks
The bronchoscope arrived attached to a display board with wire and glue gun adhesive; the metal
shows minor wear and two small scratches from the wire that held it to the display board; there is
no corrosion visible
Copy Type
Original
Reference Types
Person
Book
Reference Comments
Dr. John Desmond; "Pilling Instruments And Equipment For Surgeons And Hospitals" by The George P.
Pilling & Son Co., Philadelphia, Pennsylvania, 1932, pp. 88-89 (see attached photocopies)
Research Facts
This was an aspirating bronchoscope
Less detail
Collection
Desmond Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
Accession Number
997016044
Description
Bronchoscope, which consists of a long cylindrical tube with a rounded tip and a round eyepiece on the other end; the tip of the bronchoscope is rounded, and has a slot cut out at one side just before the tip; this slot has two small glass pieces set into it and allows the user to view bronchial tu…
Accession Number
997016044
Collection
Desmond Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
MeSH Heading
Bronchoscopy -- instrumentation
Pulmonary Disease (Specialty) -- instrumentation
Lung Disease -- diagnosis
Description
Bronchoscope, which consists of a long cylindrical tube with a rounded tip and a round eyepiece on
the other end; the tip of the bronchoscope is rounded, and has a slot cut out at one side just before
the tip; this slot has two small glass pieces set into it and allows the user to view bronchial
tubes at a right angle; the eyepiece at the other end is round and much larger in diameter;
there is a piece of glass set into the middle of the eyepiece which allows the user to view down
the length of the tube
Number Of Parts
1
Provenance
Owned by Dr. John Wilbur Desmond
Maker
The George P. Pilling & Son Co.
Site Made (City)
Philadelphia
Site Made (State)
Pennsylvania
Site Made (Country)
United States of America
Material
metal: silver
glass: clear
Inscriptions
The side of the eyepiece is stamped, "Pilling // Phila // Lamp No. / T 10 // RIGHT // ANGLE // PAT.
NO. // 2828669 // Serial // No. 6258"; and engraved, "T.O. - E.N.T."
Permanent Location
Storage Room 0010
0010-E5-8
Dimension Notes
Length: 49.0 cm. x Diam. : 3.3 cm.
Condition Remarks
The bronchoscope arrived attached to a display board with wire and glue gun adhesive; the metal
shows only minor wear and no corrosion
Copy Type
Original
Reference Types
Person
Book
Reference Comments
Dr. John Desmond; "Pilling Instruments And Equipment For Surgeons And Hospitals" by the George P.
Pilling & Son Co., Philadelphia, Pennsylvania, 1932; "Storz Surgical Instruments Catalog", ninth
edition, by Storz Instrument Company, 1966, p. 314 (see attached photocopy); "A.C.M.I. Cystoscopic,
Urologic and Allied Diagnostic Instruments and High Frequency Apparatus" by American Cystoscope
Makers, Inc., 1962, p. 271 (see attached photocopy)
Less detail
Collection
Desmond Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
Accession Number
997016051 a-b
Description
Bronchoscope with light attachment which consists of (a) a long, hollow cylindrical tube with an open bevelled tip and a round, open viewing end; the bottom of the viewing end has an attached handle made of solid rectangular metal with a rounded bottom; the back of the handle has a cylindrical hole…
Accession Number
997016051 a-b
Collection
Desmond Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
MeSH Heading
Bronchoscopy -- instrumentation
Pulmonary Disease (Specialty) -- instrumentation
Lung Disease -- diagnosis
Description
Bronchoscope with light attachment which consists of (a) a long, hollow cylindrical tube with an open bevelled tip and a round, open viewing end; the bottom of the viewing end has an attached handle made of solid rectangular metal with a rounded bottom; the back of the handle has a cylindrical hole cut into it, into which fits part of (b) a light attachment consisting of a long, narrow cylindrical metal tube with an open tip that has threading inside; the other end has a cylindrical metal handle with a square metal piece near the top, which as a short, solid cylindrical rod coming from it; this rod fits into a corresponding hole in the handle of the bronchoscope.
Number Of Parts
2
Part Names
a - bronchoscope - Size: Length 21.0 cm x Width 1.8 cm x Depth 5.2 cm
b - light - Size: Length 14.3 cm x Width 0.5 cm x Depth 4.2 cm
Provenance
Owned by Dr. John Wilbur Desmond
Material
metal: silver
Inscriptions
(a) The left side of the bronchoscope has the numbers "10" and "15" stamped into it as well as 8 increment marks (horizontal lines); the handle has a manufacturer's logo of a fish inside a crest and the letters "D.R.G.M." stamped into the back; (b) the light attachment has the number "17" stamped into the square metal piece.
Permanent Location
Storage Room 0010
0010-E5-8
Condition Remarks
The bronchoscope arrived attached to a display board with wire and glue gun adhesive; the metal shows minor wear and tarnish, but no corrosion.
Copy Type
Original
Reference Types
Person
Reference Comments
Dr. John Desmond
Research Facts
There would originally have been a light bulb screwed into the tip of the light attachment.
Less detail
Dates
1960
circa 1960
Collection
Kingston General Hospital Operating Room Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
Accession Number
997034085 a-n
Description
The bronchoscope (a) has a hand piece that is made of solid cylindrical metal; it is four-sided with a dome-like circle at the proximal end; a silver collar separates the handle from the dome; extending from the dome is an eyepiece 5 cm in length mounted with a viewing lens; mid-section has a movab…
  4 images  
Accession Number
997034085 a-n
Collection
Kingston General Hospital Operating Room Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
MeSH Heading
Bronchoscopy -- instrumentation
Pulmonary Disease (Specialty) -- instrumentation
Lung Disease -- diagnosis
Description
The bronchoscope (a) has a hand piece that is made of solid cylindrical metal; it is four-sided with a dome-like circle at the proximal end; a silver collar separates the handle from the dome; extending from the dome is an eyepiece 5 cm in length mounted with a viewing lens; mid-section has a movable wheel that is the focusing mechanism for the bronchoscope; proximal to the handpiece is a cone-shaped rubber sleeve with a black cord inserted; this cord is divided by white rings in 5 cm increments starting 20 cm from the end; a metal ring forms the tip and has three minute glass lenses at 9 o'clock, 12 o'clock and 3 o'clock and a circular opening at 6 o'clock; on the right side of the dome is an L-shaped lever that moves back and forth with a grooved thumb piece at the end; this controls the flexible tip at the end, enabling the operator to look up and down; at the left side of the dome is a large port with a cylindrical metal hollow insert; a serrated rotating collar at the centre gives way to a flat-type collar with a lip edge; covering this lip is a black rubber cap, centre opening, and a rectangular cut out to the left of the centre opening; at the base of this insert is a hollow metal tube-like structure contoured to run parallel to the cord (b) that supplies the light to the bronchoscope; the end of this tube-like structure is cone-shaped in step-like stages with a fixed wheel-like area with serrated bands; attached to the base of the dome is a black fibre optic cord; a 1.5 cm silver ring separates the cord from the end piece, which is a black metal plug-in with a 1.5 cm silver cuff threaded at proximal end; distal end has a rotating circular band with a 0.5 cm cut out; beyond this area is a solid, rounded metal bar 5.5 cm long, with a centred glass prism; at the base of this metal bar are 7 gold-coloured struts and a silver rivet; this end piece is plugged into a special power source to supply light to the bronchoscope; the bite guard (c) has a solid flat base with concave sides, and a cylindrical open centre piece; the top has a rim with rounded edges; the piece resembles a miniature bowler hat; the cytology brush (d) is a metal-plated wire with a well-worn bristle brush at the distal end; proximal end has an off-white acrylic holder with the wire inserted through it; there are nine cytology brushes (e-m), which are metal-plated wires 109 cm in length; distal ends have 1-cm tiny nylon bristle brushes; the carrying case (n) is a solid flat case with silver trim around the edges, spring locks on right and left sides with a black handle in the centre; inside the case, the base and lid have very thick inserts of high-density foam and cut outs to accomodate the instrument for transportation purposes.
Number Of Parts
14
Part Names
a - bronchoscope - Size: Length 60.0 cm x Width 7.5 cm x Depth 6.0 cm
b - light cord - Size: Length 143.5 cm x Width 2.75 cm x Depth 3.0 cm
c - bite guard - Size: Length 4.5 cm x Width 5.0 cm x Depth 3.5 cm
d - cytology brush - Size: Length 109.0 cm x Width 0.5 cm x Depth 0.4 cm
e - cytology brush - Size: Length 109.0 cm
f - cytology brush - Size: Length 109.0 cm
g - cytology brush - Size: Length 109.0 cm
h - cytology brush - Size: Length 109.0 cm
i - cytology brush - Size: Length 109.0 cm
j - cytology brush - Size: Length 109.0 cm
k - cytology brush - Size: Length 109.0 cm
l - cytology brush - Size: Length 109.0 cm
m - cytology brush - Size: Length 109.0 cmm
n - carrying case - Size: Length 23.0 cm x Width 17.0 cm x Depth 14.5 cm
Provenance
Used in the KGH operating room.
Maker
Olympus
Site Made (Country)
Japan
Dates
1960
circa 1960
Date Remarks
Scopes were all solid stainless steel after 1960.
Material
metal: silver; black; brown
glass: clear
plastic: white
acrylic: beige
Inscriptions
End of hand piece has "MADE IN JAPAN // OLYMPUS BF // TYPE B3R"; top of hand piece at base has "112 198"; distal end, two stamped areas: "EXPOSURE INDEX"; bite guard base, raised etching: "AUTOCLAVE // OLYMPUS JAPAN"; on the carrying case, the base of the handle has "OLYMPUS" stamped into the metal; to the right of the handle is a silver-coloured label with "OLYMPUS BF // Type B3R"
Permanent Location
Storage Room 0007
0007-H2-1
Condition Remarks
The metal shows some scratches; fibre optic cords show some crimping.
Copy Type
Original
Reference Types
Person
JPG
Reference Comments
Claire Kelly, OR Nurse; CD #1
Research Facts
Used for diagnostic purposes for bronchus and lungs.
Images
Less detail
Dates
1920
circa 1920
Collection
Kingston General Hospital Operating Room Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
Accession Number
997034306
Description
Straight, round, hollow instrument with an anaesthetic port at the proximal end; light carrier enclosed.
  2 images  
Accession Number
997034306
Collection
Kingston General Hospital Operating Room Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
MeSH Heading
Bronchoscopy -- instrumentation
Pulmonary Disease (Specialty) -- instrumentation
Lung Disease -- diagnosis
Description
Straight, round, hollow instrument with an anaesthetic port at the proximal end; light carrier enclosed.
Number Of Parts
1
Provenance
Used in the KGH operating room.
Dates
1920
circa 1920
Date Remarks
Stainless steel used for surgical instruments from 1920 on.
Material
metal: silver
Permanent Location
Storage Room 0010
0010-E5-8
Dimension Notes
Length 42.0 cm x Width 6.0 cm x Depth 4.0 cm
Condition Remarks
No staining; no corrosion
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"Surgical Instruments Catalog", Ninth edition, by Storz Instrument Company, 1966, p. 121 (similar to item #KF-10315Um) (see attached photocopy); CD #1
Research Facts
This instrument is used for bronchus and lung investigation; it can also be used for local or general anaesthesia.
Images
Less detail
Dates
1913
circa 1913
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
Accession Number
1975.1.3 a-t
Description
Bronchoscope, consisting of (a) a panelectroscope; (b) saliva pump; (c) autoscopic spatula; (d) serrated hook (for foreign bodies?); (e) suction spatula; (f) inner extensible tube for esophagoscopy and bronchoscopy (IET), Size 7; (g) IET, Size 12; (h) fine forceps on a long shaft; (i) fine sharp ho…
  1 image  
Accession Number
1975.1.3 a-t
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Respirology
MeSH Heading
Bronchoscopy -- instrumentation
Pulmonary Disease (Specialty) -- instrumentation
Lung Disease -- diagnosis
Description
Bronchoscope, consisting of (a) a panelectroscope; (b) saliva pump; (c) autoscopic spatula; (d) serrated hook (for foreign bodies?); (e) suction spatula; (f) inner extensible tube for esophagoscopy and bronchoscopy (IET), Size 7; (g) IET, Size 12; (h) fine forceps on a long shaft; (i) fine sharp hook on a long shaft; (j) forceps; (k) outer extensible tube for esophagoscopy and bronchoscopy (OET), Size 7; (l) OET, Size 8.5; (m) OET, Size 10; (n) IET, Size 10; (o) IET, Size 8.5; (p) OET, Size 12; (q) IET, SIze 10; (r) cord to fit (t), with electricity source; (s) IET, Size 12, bevelled tip; (t) handle to fit (a) at 180° or 90°.
Number Of Parts
20
Part Names
a - panelectroscope - Size: Length 10.0 cm x Width 13.0 cm x Depth 8.25 cm
b - saliva pump - Size: Length 11.0 cm
c - autoscopic spatula - Size: Length 15.5 cm
d - serrated hook- Size: Length 46.25 cm
e - suction spatula - Size: Length 16.0 cm
f - IET - Size: Length 40.0 cm
g - IET - Size: Length 45.0 cm
h - fine forceps - Size: Length 57.0 cm
i- hook - Size: Length 31.75 cm
j -forceps - Size: Length 40.0 cm
k - OET - Size: Length 40.0 cm
l - OET - Size: Length 45.0 cm
m - OET - Size: Length 45.0 cm
n - IET - Size: Length 45.0 cm
o - IET - Size: Length 45.0 cm
p - OET - Size: Length 45.0 cm
q - IET
r - cord - Size: Length 2.0 m
s - IET
t - handle - Size: Length 15.0 cm
Provenance
Acquired from the Academy of Medicine; source: Dr. F. Hawthorne Steele of Toronto; from the estate of Dr. T. Alexander Davies (1878-1962).
Maker
H. Reiner
Dates
1913
circa 1913
Material
metal: silver
Inscriptions
"H. REINER"; "D.R.G.M."; "GES. GESCH"; "11" on all parts of (a).
Permanent Location
Storage Room 0010
0010-E5-7
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
Schall & Son catalogue, 1913, p. 103 (similar to Fig. 1240); (c) Kny-Scheerer catalogue, 1915, p. 3278 (item #C/-15439); CD #UHN
Images
Less detail

21 records – page 1 of 3.