Skip header and navigation

Refine By

   MORE

218 records – page 1 of 22.

automatic mallet dental instrument

https://mhc.andornot.com/en/permalink/artifact14115
Dates
1900
1920
circa 1900-1920
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
010020624
Description
S. S. White Automatic Malletto place gold foil fillings with silver cylindrical instrument with two sections of ridged black Bakelite material grips near tip and engraved ridges in the handle; with a #7 S. S. White plugger point tip; company name and logo engraved at centre of instrument handle
  5 images  
Accession Number
010020624
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Dental Instruments
Dental Restoration, Permanent
MM= Dentistry, Operative -- mallet
Description
S. S. White Automatic Malletto place gold foil fillings with silver cylindrical instrument with two sections of ridged black Bakelite material grips near tip and engraved ridges in the handle; with a #7 S. S. White plugger point tip; company name and logo engraved at centre of instrument handle
Number Of Parts
1
Provenance
Transfer from the Dental Canada Fund; previously housed in the Dentistry Canada Museum (Ottawa).
Maker
The S. S. White Dental Mfg. Co.
Site Made (Country)
United States of America
Dates
1900
1920
circa 1900-1920
Date Remarks
Provided by donor
Material
metal: silver
plastic: black
Inscriptions
Manufacturer's marks engraved at centre of handle: "THE S. S. WHITE DENTAL MFG. CO. // U. S. A. PAT. MAR. 17. 03 // MADE IN U. S. OF A."
Permanent Location
Storage Room 0010
0010-B2
Dimension Notes
Length 16.5 cm x Diam 1.3 cm
Condition Remarks
Very minor surface wear and some wear on tip
Copy Type
Original
Reference Types
Book
Reference Comments
“S. S. White Dental Catalog, Catalog-F”, S. S. White Dental Mfg. Co., 1917, p. 37-38
Research Facts
Dr Ralph and Mrs Olga Crawford donated their extensive Canadian dental collection to the DCF to create the museum in 1997; further donations were received while Dr Crawford was Curator Emeritus at the Dental Canada Museum until its closure in 2008
Images
Less detail

Cameron's dental diagnostoset

https://mhc.andornot.com/en/permalink/artifact11130
Dates
1920
circa 1920
Collection
Dr. Nick Delva Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
003009001 a-f
Description
Cameron's dental diagnostoset consisting of a purple velvet lined wooden case (a) lined with leather; cylindrical power source(b) ceramic base and mesh metal body that is fitted to fit into a light socket; has a black rubber cord which connects to control unit(c) black cylindrical body that is plas…
  3 images  
Accession Number
003009001 a-f
Collection
Dr. Nick Delva Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Dental Instruments
Dentistry
Description
Cameron's dental diagnostoset consisting of a purple velvet lined wooden case (a) lined with leather; cylindrical power source(b) ceramic base and mesh metal body that is fitted to fit into a light socket; has a black rubber cord which connects to control unit(c) black cylindrical body that is plastic; has a black rubber cord which attaches to the other components; components include (d) glass cylindrical light, white with a black base and the head is slightly curved downward; (e) a white glass electrode, two metal prongs at the tip of the probe; the cord that attaches to the power source (b) is removable (f) and has been stored seperately.
Number Of Parts
6
Part Names
a - case - Size: Length 35.3 cm x Width 31.4 cm x Depth 8cm
b - power source - Size: Length 19.0 cm x Diam.4.0 cm
c- control unit - Size: Length 21.6 cm x Diam. 3.5 cm
d- light - Size: Length 21.4 cm x Width 4.5 cm x Depth 2.3 cm
e- electrode - Size: Length 11.3 cm x Width 2.3 cm x Depth 1.0 cm
f - cord - Size: too degraded to measure
Provenance
Used at the Ontario Hospital in Kingston.
Maker
Cameron's surgical specialty Co.
Site Made (City)
Chicago
Site Made (State)
Illinois
Site Made (Country)
United States of America
Dates
1920
circa 1920
Date Remarks
Donor's remarks.
Material
glass: white
rubber: black
metal: black, silver, brown
leather: black
fabric: purple
Inscriptions
"ONTARIO HOSPITAL" embossed in gold leaf on top of box lid
"CAMERON'S SURGICAL SPECIALTY CO. // CHICAGO U.S.A" on the top proper right corner of the inside lid.
"The minimum charge // for a complete diagnosis // with // Cameron's;s Dental Diagnostoset// is // $5.00 // Will J. Cameron" on a metal plaque on the inside of the lid.
Permanent Location
Storage Room 0010
0010-E5-4
Condition Remarks
Case and component parts are in stable condition however the rubber cord is deteriorated and is falling apart and therefore is in poor conditionl; several attachments are missing.
Copy Type
Original
Reference Types
Person
Web site
JPG
Reference Comments
"E-Bay"; Dr. Nick Delva; CD #2
Images
Less detail

campaign button

https://mhc.andornot.com/en/permalink/artifact1140
Collection
Lewis Collection
Category
Archival Items
Classification
Archival, Advertisements
Accession Number
997027024
Description
Round button with a metal back and a plastic-covered paper front; the front of the button has printed lettering; the back of the button has an attached metal pin and clasp.
  1 image  
Accession Number
997027024
Collection
Lewis Collection
Category
Archival Items
Classification
Archival, Advertisements
MeSH Heading
Admitting Department, Hospital -- advertisements
Description
Round button with a metal back and a plastic-covered paper front; the front of the button has printed lettering; the back of the button has an attached metal pin and clasp.
Number Of Parts
1
Provenance
Owned by Peter Lewis when he was the Vice President of Operations at Kingston General Hospital.
Maker
HAS Novelties Ltd.
Site Made (City)
Toronto
Site Made (State)
Ontario
Site Made (Country)
Canada
Material
metal: silver
plastic: clear
paper: pink; blue
Inscriptions
The front of the button reads, "We Admit, We Care"; the side of the button reads, "MADE IN CANADA by HAS NOVELTIES LTD TORONTO (416) 593-1101"
Permanent Location
Storage Room 0010
0010-C4-7
Dimension Notes
Depth: 0.8 cm. x Diam. : 4.3 cm.
Condition Remarks
The button arrived somewhat dusty
Copy Type
Original
Images
Less detail

campaign button

https://mhc.andornot.com/en/permalink/artifact1145
Collection
Lewis Collection
Category
Archival Items
Classification
Archival, Advertisements
Accession Number
997027029
Description
Round button with a metal back and a plastic-covered paper front; the front of the button has printed lettering; the back of the button has an attached metal pin and clasp.
  1 image  
Accession Number
997027029
Collection
Lewis Collection
Category
Archival Items
Classification
Archival, Advertisements
MeSH Heading
Admitting Department, Hospital -- advertisements
Description
Round button with a metal back and a plastic-covered paper front; the front of the button has printed lettering; the back of the button has an attached metal pin and clasp.
Number Of Parts
1
Provenance
Owned by Peter Lewis when he was the Vice President of Operations at Kingston General Hospital.
Maker
HAS Novelties Ltd.
Site Made (City)
Toronto
Site Made (State)
Ontario
Site Made (Country)
Canada
Material
metal: silver
plastic: clear
paper: blue; pink
Inscriptions
The front of the button reads, "We Admit, // We Care"; the side of the button reads, "MADE IN CANADA by HAS NOVELTIES LTD. TORONTO (416) 593-1101"
Permanent Location
Storage Room 0010
0010-C4-7
Dimension Notes
Depth: 0.8 cm. x Diam. : 4.3 cm.
Condition Remarks
The button arrived somewhat dusty
Copy Type
Original
Images
Less detail

campaign button

https://mhc.andornot.com/en/permalink/artifact1146
Collection
Lewis Collection
Category
Archival Items
Classification
Archival, Advertisements
Accession Number
997027030
Description
Round button with a metal back and a plastic-covered paper front; the front of the button has printed lettering; the back of the button has an attached metal pin and clasp.
  1 image  
Accession Number
997027030
Collection
Lewis Collection
Category
Archival Items
Classification
Archival, Advertisements
MeSH Heading
Admitting Department, Hospital -- advertisements
Description
Round button with a metal back and a plastic-covered paper front; the front of the button has printed lettering; the back of the button has an attached metal pin and clasp.
Number Of Parts
1
Provenance
Owned by Peter Lewis when he was the Vice President of Operations at Kingston General Hospital.
Maker
HAS Novelties Ltd.
Site Made (City)
Toronto
Site Made (State)
Ontario
Site Made (Country)
Canada
Material
metal: silver
plastic: clear
paper: blue; pink
Inscriptions
The front of the button reads, "We Admit, // We Care"; the side of the button reads, "MADE IN CANADA by HAS NOVELTIES LTD. TORONTO (416) 593-1101"
Permanent Location
Storage Room 0010
0010-C4-7
Dimension Notes
Depth: 0.8 cm. x Diam. : 4.3 cm.
Condition Remarks
The button arrived somewhat dusty
Copy Type
Original
Images
Less detail

cartridge dental syringe

https://mhc.andornot.com/en/permalink/artifact3064
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
997001064
Description
Cartridge dental syringe that consists of a central hollow cylindrical barrel with a slightly tapered open round tip that has threading on its inner edges; the other end of the syringe is open and round; the right and left sides of the barrel have an oval opening that runs almost the full length of…
  1 image  
Accession Number
997001064
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Anesthesia, Dental -- instrumentation
Dental Instruments
Dentistry
MM= Injections -- hypodermic syringe
Description
Cartridge dental syringe that consists of a central hollow cylindrical barrel with a slightly tapered open round tip that has threading on its inner edges; the other end of the syringe is open and round; the right and left sides of the barrel have an oval opening that runs almost the full length of the barrel; a plunger and finger grip section is attached to the barrel with two pivots near the end which allow the plunger to be moved away from the barrel; the plunger is made of a piece of solid cylindrical metal with a flat round thumb push piece on the end and a larger round piece with a threaded hole in the centre on the tip; the tip end of the plunger has a rounded hollow piece around it that has rounded finger grip pieces coming off at the right and left sides
Number Of Parts
1
Provenance
Collected by Dr. A.A. Travill for Queen's Faculty of Medicine collection
Maker
Wyeth
Material
metal: silver
Inscriptions
The tops of the finger grips have the words "TUBEX R" (the "R" superscripted and enclosed in a circle" on the left and "Wyeth R" (the "R" superscripted and enclosed in a circle) on the right stamped into the metal
Permanent Location
Storage Room 0010
0010-E5-2
Dimension Notes
Length 7.8 cm x Width 4.8 cm x Depth 1.5 cm
Condition Remarks
The syringe shows very minor wear and very small spots of staining; no corrosion is visible; moving parts move freely
Copy Type
Original
Reference Types
Book
Document
Other
JPG
Reference Comments
Previous number #88; "A Catalogue of Surgical Instruments and Surgical Sundries," by Chas. F. Thackray Limited, c. 1970, p. 49-2 (49-0088) (see attached photocopy); Faculty of Medicine Collection 1984 Inventory; see 997.001.081 and .082; CD #3
Images
Less detail

cartridge dental syringe

https://mhc.andornot.com/en/permalink/artifact3106
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
997001081
Description
Cartridge dental syringe that consists of a central hollow cylindrical barrel with a tapered open round tip that has threading on its outer edges; the other end of the syringe is open and round; the right and left sides of the barrel have an elongated oval opening that runs almost the full length o…
  1 image  
Accession Number
997001081
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Anesthesia, Dental -- instrumentation
Dental Instruments
Dentistry
MM= Injections -- hypodermic syringe
Description
Cartridge dental syringe that consists of a central hollow cylindrical barrel with a tapered open round tip that has threading on its outer edges; the other end of the syringe is open and round; the right and left sides of the barrel have an elongated oval opening that runs almost the full length of the barrel; a plunger and finger grip section is attached to the barrel with two screw pivots near the end; these pivots allow the plunger to be moved away from the barrel; the plunger is made of a piece of solid cylindrical metal with a flat, round thumb push piece on the end and a flat round piece with a threaded hole in the centre on the tip; the tip end of the plunger also has a rounded hollow piece around it, which has rounded finger grip pieces coming off at the right and left sides; the plunger moves up and down within the barrel
Number Of Parts
1
Provenance
Collected by Dr. A.A. Travill for Queen's Faculty of Medicine collection
Material
metal: silver
Inscriptions
The left side of the syringe barrel has the words, "JB "TUBEX" SYRINGE" stamped into the metal; the right side of the syringe barrel has the words, "JB "TUBEX" SYRINGE" stamped into the metal
Permanent Location
Storage Room 0010
0010-E5-2
Dimension Notes
Length 7.6 cm x Width 4.9 cm x Depth 1.5 cm
Condition Remarks
The metal shows very minor wear only; there is no staining or corrosion visible; moving parts move freely; #2: rusty
Copy Type
Original
Reference Types
Book
Document
Other
JPG
Reference Comments
Previous number #87; Faculty of Medicine Collection 1984 Inventory; "A Catalogue of Surgical Instruments and Surgical Sundries," by Chas. F. Thackray Limited, c. 1970, p. 49-2 (49-0088) (see attached photocopy); also see 997.001.064 and .082; CD #3
Images
Less detail

cartridge dental syringe

https://mhc.andornot.com/en/permalink/artifact3107
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
997001082
Description
Cartridge dental syringe that consists of a central hollow cylindrical barrel with a tapered open round tip that has threading on its outer edges; the other end of the syringe is open and round; the right and left sides of the barrel have an elongated oval opening that runs almost the full length o…
  1 image  
Accession Number
997001082
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Anesthesia, Dental -- instrumentation
Dental Instruments
Dentistry
MM= Injections -- hypodermic syringe
Description
Cartridge dental syringe that consists of a central hollow cylindrical barrel with a tapered open round tip that has threading on its outer edges; the other end of the syringe is open and round; the right and left sides of the barrel have an elongated oval opening that runs almost the full length of the barrel; a plunger and finger grip section is attached to the barrel with two screw pivots near the end; these pivots allow the plunger to be moved away from the barrel; the plunger is made of a piece of solid cylindrical metal with a flat, round thumb push piece on the end and a flat round piece with a threaded hole in the centre on the tip; the tip end of the plunger also has a rounded hollow piece around it, which has rounded finger grip pieces coming off at the right and left sides; the plunger moves up and down within the barrel
Number Of Parts
1
Provenance
Collected by Dr. A.A. Travill for Queen's Faculty of Medicine collection
Material
metal: silver
Inscriptions
Both the right and left sides of the syringe barrel has the words, "JB AYERST CARTREX" stamped into the metal
Permanent Location
Storage Room 0010
0010-E5-2
Dimension Notes
Length 7.6 cm x Width 4.9 cm x Depth 1.5 cm
Condition Remarks
The metal shows minor wear only; there is no staining or corrosion visible; moving parts move freely
Copy Type
Original
Reference Types
Book
Document
Other
JPG
Reference Comments
Previous number #89; Faculty of Medicine Collection 1984 Inventory; "A Catalogue of Surgical Instruments and Surgical Sundries," by Chas. F. Thackray Limited, c. 1970, p. 49-2 (49-0088) (see attached photocopy); also see 997.001.064 and .081; CD #3
Images
Less detail

dental air chip-blower syringe

https://mhc.andornot.com/en/permalink/artifact14116
Dates
1900
1920
circa 1900-1920
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
010020628
Description
Black rubber dental air chip-blower syringe has round base and nickel plated silver metal long narrow tube with diagonal 1.3 cm slanted tip; tube is attached to base by metal screw; bulb has ridge around the circumference 2.0 cm from bottom; tube has second 5.5 cm supporting rod in addition to the …
  3 images  
Accession Number
010020628
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Dental Instruments
Dental Prophylaxis -- instrumentation
Dentistry
Description
Black rubber dental air chip-blower syringe has round base and nickel plated silver metal long narrow tube with diagonal 1.3 cm slanted tip; tube is attached to base by metal screw; bulb has ridge around the circumference 2.0 cm from bottom; tube has second 5.5 cm supporting rod in addition to the main air tube.
Number Of Parts
1
Provenance
Transfer from the Dental Canada Fund; previously housed in the Dentistry Canada Museum (Ottawa).
Dates
1900
1920
circa 1900-1920
Date Remarks
Suppliers catalogue from 1915
Material
rubber: black
metal: silver
Permanent Location
Storage Room 0010
0010-B
Dimension Notes
Length 14.0 cm x Diam 5.0 cm
Condition Remarks
Rubber hard; overall wear particularly on black rubber base which has overall grey blotches; minor cracking of rubber around neck of base
Copy Type
Original
Reference Types
Book
Reference Comments
“S. S. White Dental Catalogue, Catalogue-G”, S. S. White Dental Mfg. Co., 1915, similar to p. 32 Model No.22
Research Facts
This is used as a chip-blower syringe providing a strong blast of air for clearing out debris from the cavity. The tube of the syringe is easily removed for sterilization. Dr Ralph and Mrs Olga Crawford donated their extensive Canadian dental collection to the DCF to create the museum in 1997; further donations were received while Dr Crawford was Curator Emeritus at the Dental Canada Museum until its closure in 2008
Images
Less detail

dental air chip-blower syringe

https://mhc.andornot.com/en/permalink/artifact14064
Dates
1900
1920
circa 1900-1920
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
010020630
Description
Black rubber dental air chip-blower syringe has round base and nickel plated silver metal long narrow tube with diagonal 1.3 cm slanted tip; tube is attached by metal screw cap; bulb has ridge around the circumference 2.0 cm from bottom.
  2 images  
Accession Number
010020630
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Dental Instruments
Dental Prophylaxis -- instrumentation
Dentistry
Description
Black rubber dental air chip-blower syringe has round base and nickel plated silver metal long narrow tube with diagonal 1.3 cm slanted tip; tube is attached by metal screw cap; bulb has ridge around the circumference 2.0 cm from bottom.
Number Of Parts
1
Provenance
Transfer from the Dental Canada Fund; previously housed in the Dentistry Canada Museum (Ottawa).
Dates
1900
1920
circa 1900-1920
Date Remarks
Suppliers catalogue from 1915
Material
rubber: black
metal: silver
Permanent Location
Storage Room 0010
0010-B
Dimension Notes
Length 16.3 cm x Diam 5.9 cm
Condition Remarks
Rubber is hard; four small dents in tube; minor wear overall
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
“S. S. White Dental Catalogue, Catalogue-G”, S. S. White Dental Mfg. Co., 1915, p. 32 Model No. 22; CD #6
Research Facts
This is used as a chip-blower syringe providing a strong blast of air for clearing out debris from the cavity. The tube of the syringe is easily removed for sterilization. Dr Ralph and Mrs Olga Crawford donated their extensive Canadian dental collection to the Dental Canada Fund to create the museum in 1997. Further donations were received while Dr Crawford was Curator Emeritus at the Dental Canada Museum until its closure in 2008.
Images
Less detail

218 records – page 1 of 22.