Skip header and navigation

Refine By

   MORE

45 records – page 1 of 5.

automatic mallet dental instrument

https://mhc.andornot.com/en/permalink/artifact14115
Dates
1900
1920
circa 1900-1920
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
010020624
Description
S. S. White Automatic Malletto place gold foil fillings with silver cylindrical instrument with two sections of ridged black Bakelite material grips near tip and engraved ridges in the handle; with a #7 S. S. White plugger point tip; company name and logo engraved at centre of instrument handle
  5 images  
Accession Number
010020624
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Dental Instruments
Dental Restoration, Permanent
MM= Dentistry, Operative -- mallet
Description
S. S. White Automatic Malletto place gold foil fillings with silver cylindrical instrument with two sections of ridged black Bakelite material grips near tip and engraved ridges in the handle; with a #7 S. S. White plugger point tip; company name and logo engraved at centre of instrument handle
Number Of Parts
1
Provenance
Transfer from the Dental Canada Fund; previously housed in the Dentistry Canada Museum (Ottawa).
Maker
The S. S. White Dental Mfg. Co.
Site Made (Country)
United States of America
Dates
1900
1920
circa 1900-1920
Date Remarks
Provided by donor
Material
metal: silver
plastic: black
Inscriptions
Manufacturer's marks engraved at centre of handle: "THE S. S. WHITE DENTAL MFG. CO. // U. S. A. PAT. MAR. 17. 03 // MADE IN U. S. OF A."
Permanent Location
Storage Room 0010
0010-B2
Dimension Notes
Length 16.5 cm x Diam 1.3 cm
Condition Remarks
Very minor surface wear and some wear on tip
Copy Type
Original
Reference Types
Book
Reference Comments
“S. S. White Dental Catalog, Catalog-F”, S. S. White Dental Mfg. Co., 1917, p. 37-38
Research Facts
Dr Ralph and Mrs Olga Crawford donated their extensive Canadian dental collection to the DCF to create the museum in 1997; further donations were received while Dr Crawford was Curator Emeritus at the Dental Canada Museum until its closure in 2008
Images
Less detail

Barnes dental gold casting machine

https://mhc.andornot.com/en/permalink/artifact13530
Dates
1918
1927
1918-1927
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
010020409 a-d
Description
Dental casting machine (a); brown wooden rectangular base; cylindrical yellow metal pump to one side; brown wooden cylindrical handle at top; larger cylindrical yellow metal tank with raised border around middle and gauge at top, printed with black enamel and covered with clear glass; gauge shows n…
  5 images  
Accession Number
010020409 a-d
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Dental Prosthesis
Denture, Complete
Denture, Partial
Dental Restoration, Permanent
MM= Dental Casting Technic -- casting appliance
Description
Dental casting machine (a); brown wooden rectangular base; cylindrical yellow metal pump to one side; brown wooden cylindrical handle at top; larger cylindrical yellow metal tank with raised border around middle and gauge at top, printed with black enamel and covered with clear glass; gauge shows numbers 0-30; red rubber tube comes from tank, would attach to press; metal valve coming from bottom of tank; black rubber tube goes between tank and pump; black-enamelled silver metal press in middle of base; lever with brown wooden bulbous handle at front; pulling lever down causes silver metal cylinder to move down toward base; metal disc (b) with five perforated holes in middle fits into base underneath lever; smaller disc (d) screws onto bottom of silver metal cylinder; cylindrical dish (c) with matching perforated holes sits on larger disc; white fabric tube, covered with red rubber, goes from bottom of cylinder up to top of press
Number Of Parts
4
Part Names
a - machine - Size: Length 55.0 cm x Width 54.6 cm x Depth 22.3 cm
b - disc - Size: Depth 3.0 cm x Diam. 10.5 cm
c - dish - Size: Depth 3.5 cm x Diam. 6.8 cm
d - disc - Size: Depth 2.3 cm x Diam. 6.5 cm
Provenance
Transfer from the Dental Canada Fund; previously housed in the Dentistry Canada Museum (Ottawa)
Maker
Burns Dental Casting Machine Co.
Site Made (City)
Flushing, Long Island
Site Made (State)
New York
Site Made (Country)
United States of America
Dates
1918
1927
1918-1927
Date Remarks
Based on patent dates
Material
wood: brown
metal: yellow, silver
rubber: red, black
enamel: red, black
glass: clear
fabric: white
Inscriptions
(a) Embossed on side of machine: "BURNS DENTAL CASTING MACH. // PAT JULY 16-18"; printed in gauge: "BURNS // DENTAL CASTING MACHINE. // NATIONAL GAUGE AND EOPT. CO. // LA CROSSE, WIS. // 1251-G"; engraved at top: "BURNS DENTAL CASTING MACHINE // PATENTED JULY 16,1918. JULY 10,1917. JULY 16,1918. // OTHER PATENTS PENDING // MANUFACTURED BY // BURNS DENTAL CASTING MACHINE CO. // FLUSHING, L.I., N.Y."
Permanent Location
Storage Room 0007
0007-T1-3
Condition Remarks
Wood base is very worn; black enamel peeling heavily from press; masking tape holds fabric tube onto bottom of press; tube is ripped, does not attach to top of press; red rubber tube from tank does not attach to press; all rubber is brittle; some tarnishing on metal
Copy Type
Original
Reference Types
Internet
JPG
Reference Comments
"Free Patents Online" website; "Edward M. Feinberg, D.M.D." website
CD #1
Research Facts
Dr Ralph and Mrs Olga Crawford donated their extensive Canadian dental collection to the DCF to create the museum in 1997; further donations were received while Dr Crawford was Curator Emeritus at the Dental Canada Museum until its closure in 2008; this item was donated by Dr. Ralph Crawford from Winnipeg, Manitoba; the company patented another casting maching design in 1927, so this machine most likely dates before that year; William Taggert designed the first casting machine in 1907; it had a very similar design to this item
Exhibit History
On exhibit, "Teeth in Time," Case #2, 29 March 2011 - November 2014
Images
Less detail

Cavident Special Compound

https://mhc.andornot.com/en/permalink/artifact14856
Dates
1955
1960
circa 1955-1960
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
010020687
Description
Rectangular metal container with grey paper label on all sides with white text has an oval lid on one end and an opening covered by tan adhesive paper on the other; new, not opened.
  3 images  
Accession Number
010020687
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Dental High Speed Equipment
Dentistry
Dental Restoration, Permanent
MM= Dentistry, Operative -- drill
Description
Rectangular metal container with grey paper label on all sides with white text has an oval lid on one end and an opening covered by tan adhesive paper on the other; new, not opened.
Number Of Parts
1
Provenance
Transfer from the Dental Canada Fund; previously housed in the Dentistry Canada Museum (Ottawa).
Maker
Cavitron Equipment Corporation
Site Made (City)
Long Island
Site Made (State)
New York
Site Made (Country)
United States of America
Dates
1955
1960
circa 1955-1960
Date Remarks
Based on donor's remarks
Material
metal: silver
paper: tan
ink: white, black
Inscriptions
Printed on label: "CAVIDENT // Special Compound // For use with the // CAVITRON // ULTRASONIC DENTAL UNIT // CAVITRON EQUIPMENT CORPORATION // LONG ISLAND CITY, N.Y."; printed on side of container: "DIRECTIONS // Initial charge - add one // pound of CAVIDENT (1/4 can) // to container three-quarters // filled with water. Check // concentration with plastic // Cavident Concentration // Checker. Add CAVIDENT // as needed. // Refill charge - fill container // with water to 3/4 level. Then // add small quantities of // CAVIDENT to bring concen- // tration up to required level // on Cavident Concentration // Checker. // NET WEIGHT 4 LBS."
Permanent Location
Storage Room 0010
0010-A1-1
Width
9.2 cm
Height
18.0 cm
Depth
6.7 cm
Unit Of Measure
centimeters
Condition Remarks
Paper labels shows wear, abraded with minor surface fading; metal on one end shows aging
Copy Type
original
Reference Types
Person
Reference Comments
Dr. George H. Stewart
Research Facts
Originally purchased by Dr. George H. Stewart from Thornbury, Ontario, who used it in the late 1950s onwards; it was purchased in 1957 for $1,800 and was well-received by his patients, as there was much less vibration than with the slower drills of the time; it cut only solid tooth, so decay was removed with excavators or burs. Dr. Stewart states that he was one of the few dentists who used this unit in a variety of ways, including in periodontal scaling, root canal filing, cavity preparation and amalgam condensation; the Cavitron system worked, in effect, as a rapid erosion process on teeth; Cavident, a cutting medium made up of specially graded aluminum oxide particles, was mixed with water and air in the unit, then applied between the tool and the surface of the tooth to create a precise, clean cut; the unit also had a water supply to cool the handpiece and to provide rinsing water.
Dr Ralph and Mrs Olga Crawford donated their extensive Canadian dental collection to the DCF to create the museum in 1997; further donations were received while Dr Crawford was Curator Emeritus at the Dental Canada Museum until its closure in 2008.
Images
Less detail

Cavident Special Compound

https://mhc.andornot.com/en/permalink/artifact14857
Dates
1955
1960
circa 1955-1960
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
010020688
Description
Rectangular metal container with grey paper label on all sides with white text has an oval lid on one end and an opening covered by tan adhesive paper on the other; new, not opened.
  3 images  
Accession Number
010020688
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Dental High Speed Equipment
Dentistry
Dental Restoration, Permanent
MM= Dentistry, Operative -- drill
Description
Rectangular metal container with grey paper label on all sides with white text has an oval lid on one end and an opening covered by tan adhesive paper on the other; new, not opened.
Number Of Parts
1
Provenance
Transfer from the Dental Canada Fund; previously housed in the Dentistry Canada Museum (Ottawa).
Maker
Cavitron Equipment Corporation
Site Made (City)
Long Island
Site Made (State)
New York
Site Made (Country)
United States of America
Dates
1955
1960
circa 1955-1960
Date Remarks
Based on donor's remarks
Material
metal: silver
paper: tan
ink: white, black
Inscriptions
Printed on label: "CAVIDENT // Special Compound // For use with the // CAVITRON // ULTRASONIC DENTAL UNIT // CAVITRON EQUIPMENT CORPORATION // LONG ISLAND CITY, N.Y."; printed on side of container: "DIRECTIONS // Initial charge - add one // pound of CAVIDENT (1/4 can) // to container three-quarters // filled with water. Check // concentration with plastic // Cavident Concentration // Checker. Add CAVIDENT // as needed. // Refill charge - fill container // with water to 3/4 level. Then // add small quantities of // CAVIDENT to bring concen- // tration up to required level // on Cavident Concentration // Checker. // NET WEIGHT 4 LBS."
Permanent Location
Storage Room 0010
0010-A1-1
Width
9.2 cm
Height
18.0 cm
Depth
6.7 cm
Unit Of Measure
centimeters
Condition Remarks
Paper labels shows wear, abraded with minor surface fading; metal on one end shows aging; minor leak of powder through paper, store container right side up
Copy Type
original
Reference Types
Person
Reference Comments
Dr. George H. Stewart
Research Facts
Originally purchased by Dr. George H. Stewart from Thornbury, Ontario, who used it in the late 1950s onwards; it was purchased in 1957 for $1,800 and was well-received by his patients, as there was much less vibration than with the slower drills of the time; it cut only solid tooth, so decay was removed with excavators or burs. Dr. Stewart states that he was one of the few dentists who used this unit in a variety of ways, including in periodontal scaling, root canal filing, cavity preparation and amalgam condensation; the Cavitron system worked, in effect, as a rapid erosion process on teeth; Cavident, a cutting medium made up of specially graded aluminum oxide particles, was mixed with water and air in the unit, then applied between the tool and the surface of the tooth to create a precise, clean cut; the unit also had a water supply to cool the handpiece and to provide rinsing water.
Dr Ralph and Mrs Olga Crawford donated their extensive Canadian dental collection to the DCF to create the museum in 1997; further donations were received while Dr Crawford was Curator Emeritus at the Dental Canada Museum until its closure in 2008.
Images
Less detail

Cavident Special Compound

https://mhc.andornot.com/en/permalink/artifact14858
Dates
1955
1960
circa 1955-1960
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
010020689
Description
Rectangular metal container with grey paper label on all sides with white text has an oval lid on one end and an opening covered by tan adhesive paper on the other; new, not opened.
  3 images  
Accession Number
010020689
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Dental High Speed Equipment
Dentistry
Dental Restoration, Permanent
MM= Dentistry, Operative -- drill
Description
Rectangular metal container with grey paper label on all sides with white text has an oval lid on one end and an opening covered by tan adhesive paper on the other; new, not opened.
Number Of Parts
1
Provenance
Transfer from the Dental Canada Fund; previously housed in the Dentistry Canada Museum (Ottawa).
Maker
Cavitron Equipment Corporation
Site Made (City)
Long Island
Site Made (State)
New York
Site Made (Country)
United States of America
Dates
1955
1960
circa 1955-1960
Date Remarks
Based on donor's remarks
Material
metal: silver
paper: tan
ink: white, black
Inscriptions
Printed on label: "CAVIDENT // Special Compound // For use with the // CAVITRON // ULTRASONIC DENTAL UNIT // CAVITRON EQUIPMENT CORPORATION // LONG ISLAND CITY, N.Y."; printed on side of container: "DIRECTIONS // Initial charge - add one // pound of CAVIDENT (1/4 can) // to container three-quarters // filled with water. Check // concentration with plastic // Cavident Concentration // Checker. Add CAVIDENT // as needed. // Refill charge - fill container // with water to 3/4 level. Then // add small quantities of // CAVIDENT to bring concen- // tration up to required level // on Cavident Concentration // Checker. // NET WEIGHT 4 LBS."
Permanent Location
Storage Room 0010
0010-A1-1
Width
9.2 cm
Height
18.0 cm
Depth
6.7 cm
Unit Of Measure
centimeters
Condition Remarks
Paper labels shows wear, abraded with minor surface fading; metal on one end shows aging; one corner on bottom is smushed a bit; minor leak of powder through paper, store container right side up
Copy Type
original
Reference Types
Person
Reference Comments
Dr. George H. Stewart
Research Facts
Originally purchased by Dr. George H. Stewart from Thornbury, Ontario, who used it in the late 1950s onwards; it was purchased in 1957 for $1,800 and was well-received by his patients, as there was much less vibration than with the slower drills of the time; it cut only solid tooth, so decay was removed with excavators or burs. Dr. Stewart states that he was one of the few dentists who used this unit in a variety of ways, including in periodontal scaling, root canal filing, cavity preparation and amalgam condensation; the Cavitron system worked, in effect, as a rapid erosion process on teeth; Cavident, a cutting medium made up of specially graded aluminum oxide particles, was mixed with water and air in the unit, then applied between the tool and the surface of the tooth to create a precise, clean cut; the unit also had a water supply to cool the handpiece and to provide rinsing water.
Dr Ralph and Mrs Olga Crawford donated their extensive Canadian dental collection to the DCF to create the museum in 1997; further donations were received while Dr Crawford was Curator Emeritus at the Dental Canada Museum until its closure in 2008.
Images
Less detail

dental articulating paper

https://mhc.andornot.com/en/permalink/artifact13692
Dates
1940
1950
circa 1940-1950
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
010020524
Description
Articulating paper sample pack is held inside an orange booklet with two staples along the spine; articulating paper is covered in a dark blue wax-like ink; each sheet is separated by a thin piece of light brown tissue paper; booklet has the product information on the front and company information …
  3 images  
Accession Number
010020524
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Dentistry
Dental Materials
Dental Restoration, Permanent
Description
Articulating paper sample pack is held inside an orange booklet with two staples along the spine; articulating paper is covered in a dark blue wax-like ink; each sheet is separated by a thin piece of light brown tissue paper; booklet has the product information on the front and company information on the back, both are printed in black ink; medical supply company name is stamped on the front of the booklet in black ink.
Number Of Parts
1
Provenance
Transfer from the Dental Canada Fund; previously housed in the Dentistry Canada Museum (Ottawa)
Maker
Esquire Mfg. Co.
Dates
1940
1950
circa 1940-1950
Date Remarks
Based on donor's remarks
Material
paper: brown, orange
ink: blue, black
Inscriptions
Printed on the front of booklet: "SUPER-SENSITIVE // "ONE-BITE" TAB // ARTICULATING PAPER // LEAVES ITS MARK // IN "ONE-BITE" WET OR DRY // Full Denture Thin"; printed on the back of booklet: "Your patient registers with one-bite the // status of occlusion. Distortions due to // old method of paper chewing is elim- // inated by our special "One-Bite" formula. // ESQUIRE MFG. CO."
Permanent Location
Storage Room 2005
2005-2-5 Box 23
Dimension Notes
Length 7.1cm x Width 8.5 cm x Depth 0.4 cm
Condition Remarks
There is staining present around the staples holding the booklet together; the front cover has torn and is detaching at the staples
Copy Type
Original
Reference Types
Internet
JPG
Reference Comments
"Bausch" website; CD #4
Research Facts
Dr Ralph and Mrs Olga Crawford donated their extensive Canadian dental collection to the DCF to create the museum in 1997; further donations were received while Dr Crawford was Curator Emeritus at the Dental Canada Museum until its closure in 2008; articulating paper is used to leave marks indicating all occlusal contacts.
Images
Less detail

dental articulating paper sample

https://mhc.andornot.com/en/permalink/artifact13693
Dates
1960
1970
circa 1960-1970
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
010020525
Description
Dental articulating paper samples are stapled onto a rectangular white piece of cardstock which is printed on in blue ink; there are two different samples present; the top sample has a green paper cover printed on in black ink with a thicker, dark blue articulating paper inside; the bottom sample h…
  2 images  
Accession Number
010020525
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Dentistry
Dental Materials
Dental Restoration, Permanent
Description
Dental articulating paper samples are stapled onto a rectangular white piece of cardstock which is printed on in blue ink; there are two different samples present; the top sample has a green paper cover printed on in black ink with a thicker, dark blue articulating paper inside; the bottom sample has a blue and white cover with extra thin dark blue articulating paper inside; on the bottom of the white cardstock, there is a printed rectangular blue box indicating a red sample of articulating paper can be mailed on demand; on the back there are two colour pictures indicating the marks the articulating paper leaves on dentures or teeth; sample page seems to have been cut manually on the proper right side.
Number Of Parts
1
Provenance
Transfer from the Dental Canada Fund; previously housed in the Dentistry Canada Museum (Ottawa)
Maker
Bausch Dental Co. of America
Site Made (City)
Boston
Site Made (State)
Massachusetts
Site Made (Country)
United States of America
Dates
1960
1970
circa 1960-1970
Date Remarks
Date based on company information
Material
card stock: white, green, blue, white
paper: blue
ink: black, blue, red
Inscriptions
Printed on the top sample cover: "Articulating Paper // with pressure controlled color // US-Sales Office: Bausch Dental Co. of America P.O. Box 1 Boston Mass. 02215"; printed on the bottom sample cover: "BK Articulating Paper // extra-thin .016 inch // Made in Germany"; printed on the bottom of white cardstock: "Free samples of thin red articulating paper BK 10 // will be mailed on demand"; printed down the proper left hand side of the cardstock: "BK 01 or 05 BK 09 BK 10"
Permanent Location
Storage Room 2005
2005-2-5 Box 23
Dimension Notes
Length 12.5 cm x Width 10.0 cm x Depth 0.3 cm
Condition Remarks
The bottom proper right corner is bent and the white cardstock is dirty on the proper left hand side
Copy Type
Original
Reference Types
Internet
JPG
Reference Comments
"Bausch" website; CD #4
Research Facts
Dr Ralph and Mrs Olga Crawford donated their extensive Canadian dental collection to the DCF to create the museum in 1997; further donations were received while Dr Crawford was Curator Emeritus at the Dental Canada Museum until its closure in 2008; the Bausch Dental Co. of America was established in 1953 by dentists Dr. Jean Bausch and his son Dr. Hans Bausch; Dr. Hans Bausch developed a unique articulating paper which marks intensively on moist surfaces; articulating paper is used to leave marks indicating all occlusal contacts; micro-thin articulating papers were introduced in the 1960's
Images
Less detail

dental bite rim former

https://mhc.andornot.com/en/permalink/artifact13297
Dates
1930
1950
circa 1930-1950
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
010020175 a-f
Description
Trubyte bite rim former; silver metal arch (a) with curved indents at sides fits into horizontal metal piece (b) with a half-circle in middle and raised sides; rectangular white paper box (d) with lid (c) with white label affixed to top printed with black ink; label states product name, contents of…
  5 images  
Accession Number
010020175 a-f
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Dental Instruments
Dental Restoration, Permanent
Description
Trubyte bite rim former; silver metal arch (a) with curved indents at sides fits into horizontal metal piece (b) with a half-circle in middle and raised sides; rectangular white paper box (d) with lid (c) with white label affixed to top printed with black ink; label states product name, contents of box, manufacturer's information; rectangular instructional pamphlet (e), one white page folded in two and printed with black ink, with black and white photographs instructing how to use bite rim former; brown rectangular envelope for Trubyte 20 degree posterior template (f) printed with black ink on front
Number Of Parts
6
Part Names
a - bite rim former - Size: Length 7.0 cm x Width 4.5 cm x Depth 1.0 cm
b - bite rim former - Size: Length 7.0 cm x Width 3.8 cm x Depth 0.8 cm
c - box lid - Size: Length 8.4 cm x Width 6.5 cm x Depth 1.6 cm
d - box - Size: Length 7.8 cm x Width 6.2 cm x Depth 1.7 cm
e - brochure - Size: Length 15.1 cm x Width 11.7 cm x Depth 0.1 cm
f - envelope - Size: Length 11.1 cm x Width 7.5 cm x Depth 0.1 cm
Provenance
Transfer from the Dental Canada Fund; previously housed in the Dentistry Canada Museum (Ottawa)
Maker
The Dentists' Supply Company of New York
Site Made (City)
New York
Site Made (State)
New York
Site Made (Country)
United States of America
Dates
1930
1950
circa 1930-1950
Date Remarks
Based on design
Material
metal: silver
paper: white, brown
ink: black
Inscriptions
(a) Engraved on bite rim former: "621"; (b) engraved on bite rim former: "MADE IN U.S.A. // THE DENTISTS' SUPPLY CO. OF NEW YORK // 621 // THE TRUBYTE BITE RIM FORMER"; (c) printed on label: "TRUBYTE // BITE RIM FORMER // Saves time and eliminates guess-work // Insures proper inclination of the bite rim. // Cast Brass, Nickel Plated // Descriptive circular and directions enclosed. // Made in U.S.A. by // The Dentists' Supply Co. of New York // 220 West 42nd Street NEW YORK"
Permanent Location
(a, b, c, d): Storage Room 0010
0010-B
(e, f): Storage Room 2005
2005-2-5 Box 22
Condition Remarks
Box is darkened, worn, with some water marks; paper worn at folds on (e), (f); envelope (f) is slit open at side, empty
Copy Type
Original
Reference Types
JPG
Reference Comments
CD #10
Research Facts
Dr Ralph and Mrs Olga Crawford donated their extensive Canadian dental collection to the DCF to create the museum in 1997; further donations were received while Dr Crawford was Curator Emeritus at the Dental Canada Museum until its closure in 2008; this item was donated by Dr. John Lyon from Kingston, Ontario
Images
Less detail

dental casting outfit

https://mhc.andornot.com/en/permalink/artifact13457
Dates
1900
1920
circa 1900-1920
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
010020336 a-g
Description
Dental casting and swaging outfit; rectangular brown paper box (b) and lid (a); lid states manufacturing and product information, printed with brown ink; two half-pound green-enamelled silver metal rectangular boxes (c, d) of Melotte Moldine; product information printed with black enamel on sides a…
  5 images  
Accession Number
010020336 a-g
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Dental Prosthesis
Denture, Complete
Denture, Partial
Dental Restoration, Permanent
MM= Dental Casting Technic -- casting appliance
Description
Dental casting and swaging outfit; rectangular brown paper box (b) and lid (a); lid states manufacturing and product information, printed with brown ink; two half-pound green-enamelled silver metal rectangular boxes (c, d) of Melotte Moldine; product information printed with black enamel on sides and lids; brown metal cylindrical swager (e), rounded at top and slightly indented at bottom; brown rubber ring (f); cylindrical brown metal stamp (g) with flat bottom and imprint of the top of a molar at top
Number Of Parts
7
Part Names
a - box lid - Size: Length 12.2 cm x Width 9.5 cm x Depth 7.4 cm
b - box - Size: Length 11.5 cm x Width 9.2 cm x Depth 7.4 cm
c - moldine box - Size: Length 6.6 cm x Width 5.5 cm x Depth 5.3 cm
d - moldine box - Size: Length 6.6 cm x Width 5.5 cm x Depth 5.3 cm
e - swager - Size: Length 6.7 cm x Diam. 3.2 cm
f - ring - Size: Length 3.4 cm x Width 3.0 cm x Depth 2.6 cm
g - stamp - Size: Length 2.9 cm x Diam. 2.1 cm
Provenance
Transfer from the Dental Canada Fund; previously housed in the Dentistry Canada Museum (Ottawa)
Maker
S.S. White Dental Manufacturing Co.
Site Made (City)
Philadelphia
Site Made (State)
Pennsylvania
Site Made (Country)
United States of America
Dates
1900
1920
circa 1900-1920
Date Remarks
Based on supplier's catalogue
Material
metal: brown, silver
enamel: green, black
rubber: brown
paper: brown
ink: brown
Inscriptions
(a) Printed on top: "MELOTTE // Registered in // MOLDINE OUTFIT // U.S. Patent Office // FOR CROWN AND COUNTER DIES // To soften Moldine, moisten with Glycerin // THE S.S. WHITE DENTAL MANUFACTURING CO. // Made in United States of America"; printed on sides: "Melotte // Moldine // Outfit // Moldine // Melotte // Fusible Metal // Rubber Ring // Ladle No. 8"
Permanent Location
Storage Room 0010
0010-B
Condition Remarks
Box and lid (a, b) very faded, worn, dirty; bottom of box very fragile, half missing; metal on Moldine boxes (c, d) rusty; (c) is dented, with small hole at bottom; (d) is in poor condition, severely corroded with large part of one side missing; metal tarnished on (e, g); rubber ring (f) is hardened into oval shape, but slightly malleable
Copy Type
Original
Reference Types
Book
Internet
JPG
Reference Comments
“S.S. White Dental Catalog, Catalog-G”, S.S. White Dental Mfg. Co., 1915, p. 68-73; “S.S. White Dental Catalog, Catalog-L”, S.S. White Dental Mfg. Co., 1914, p. 21; American Journal of Dental Science, Vol. 22, No. 1, May 1888
CD #1
Research Facts
Dr Ralph and Mrs Olga Crawford donated their extensive Canadian dental collection to the DCF to create the museum in 1997; further donations were received while Dr Crawford was Curator Emeritus at the Dental Canada Museum until its closure in 2008; Melotte Moldine was used to take impressions of teeth or roots, so a metal crown or bridge could be made; this outfit does not include what is listed on the box, but includes other items; missing are a ladle and cubes of fusible metal; an 1888 advertisement states the complete outfit includes an impression cup, rubber ring, fusible metal as well as the moldine
Images
Less detail

dental die-plate

https://mhc.andornot.com/en/permalink/artifact13452
Dates
1930
1940
circa 1930-1940
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
Accession Number
010020331
Description
Silver metal dental die-plate; rectangular plate with manufacturer's name embossed at top; hole punched at top centre; 72 embossed molds of tops of teeth in rows on front; smooth on back side
  2 images  
Accession Number
010020331
Collection
Dr. Ralph and Mrs. Olga Crawford Canadian Dental Collection
Category
Diagnostic & Treatment Artifacts
Classification
Dental
MeSH Heading
Dental Prosthesis
Denture, Complete
Denture, Partial
Dental Restoration, Permanent
MM= Dental Casting Technic -- casting appliance
Description
Silver metal dental die-plate; rectangular plate with manufacturer's name embossed at top; hole punched at top centre; 72 embossed molds of tops of teeth in rows on front; smooth on back side
Number Of Parts
1
Provenance
Transfer from the Dental Canada Fund; previously housed in the Dentistry Canada Museum (Ottawa)
Maker
Ransom & Randolph Co.
Site Made (City)
Toledo
Site Made (State)
Ohio
Site Made (Country)
United States of America
Dates
1930
1940
circa 1930-1940
Date Remarks
Based on donors remarks
Material
Metal: silver, grey
Inscriptions
Embossed on top: "COATES DIE-PLATE // THE RANSOM & RANDOLPH Co. TOLEDO, O. AGENT // LEFT RIGHT"; scratched on back: "C.M. Snow // D.D.S"
Permanent Location
Storage Room 0010
0010-B
Temporary Location
MHC 2017 Public Program: Seniors Program - Say Cheese: History of Dentures and Dental Health, July 2017
Dimension Notes
Length 19.7 cm x Width 14.0 cm x Depth 0.4 cm
Condition Remarks
Metal dull and tarnished, especially on back; pink remnants in bottom left hand corner of front
Copy Type
Original
Reference Types
Person
JPG
Reference Comments
J. Diane Snow
CD #1
Research Facts
Dr Ralph and Mrs Olga Crawford donated their extensive Canadian dental collection to the DCF to create the museum in 1997; further donations were received while Dr Crawford was Curator Emeritus at the Dental Canada Museum until its closure in 2008; this item was donated by J. Diane Snow from Vancouver, British Columbia and was originally owned by her father Dr. Cecil Montague Snow, who used it during 1929-1942 while traveling around rural Saskatchewan, after which he settled in Calgary, Alberta; he graduated from the Baltimore College of Dental Surgery, University of Maryland in 1916
Images
Less detail

45 records – page 1 of 5.