Skip header and navigation

11 records – page 1 of 2.

90° regular holder

https://mhc.andornot.com/en/permalink/artifact4701
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
Accession Number
000003144
Description
The regular holder consists of two C-style clamps joined by a twisted metal component that sets each clamp at 90°; at the base of each clamp component, a 90° angle groove is set into the metal; the securing action of each clamp is provided by a heavy threaded bolt with a flat, circular turning knob…
  2 images  
Accession Number
000003144
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
MeSH Heading
Equipment and Supplies
Chemistry
MM= Chemical Apparatus
Description
The regular holder consists of two C-style clamps joined by a twisted metal component that sets each clamp at 90°; at the base of each clamp component, a 90° angle groove is set into the metal; the securing action of each clamp is provided by a heavy threaded bolt with a flat, circular turning knob that fits into a hollow, round extension at the end of each clamp arm.
Number Of Parts
1
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Fisher
Material
metal: silver
Inscriptions
"FISHER" is stamped into one of the metal clamp arms; "CASTALOY" is stamped into the metal near the end of one clamp arm.
Permanent Location
Storage Room 0010
0010-F7-3
Dimension Notes
Length 16.0 cm x Width 9.0 cm x Depth 6.0 cm
Condition Remarks
The regular holder was moderately dusty; a yellow deposit had accumulated within the threads of the securing bolts; the holder shows signs of moderate wear, particularly in the form of scratches on the flat surfaces of both 90° grooves; there are no major dents, and only minor inactive corrosion in one of the grooves; both bolts move freely
Copy Type
Original
Reference Types
Book
Reference Comments
"The VWR Canlab Catalogue," VWR Canlab U.S.A., 1997, p. 451 (similar to item in lower left figure) (see attached photocopy)
Research Facts
Object name taken from catalogue.
Images
Less detail

90° regular holder

https://mhc.andornot.com/en/permalink/artifact4808
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
Accession Number
000003230
Description
The regular holder consists of two C-style clamps joined by a twisted metal component that sets each clamp at a 90° angle; the clamp arms are curved; at the bases of the clamps, there is a V-shaped groove; the securing action of each clamp is provided by a heavy threaded bolt with a flat, circular …
  2 images  
Accession Number
000003230
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
MeSH Heading
Equipment and Supplies
Chemistry
MM= Chemical Apparatus
Description
The regular holder consists of two C-style clamps joined by a twisted metal component that sets each clamp at a 90° angle; the clamp arms are curved; at the bases of the clamps, there is a V-shaped groove; the securing action of each clamp is provided by a heavy threaded bolt with a flat, circular turning knob that fits into a hollow, round extension at the end of each clamp arm.
Number Of Parts
1
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Fisher
Site Made (Country)
United States of America
Material
metal: silver
Inscriptions
In raised metal letters on one side of the curving arm: "FISHER"; on the opposite side of the metal curving arm appears, in raised metal, a short rectangle above a long rectangle.
Permanent Location
Storage Room 0010
0010-F7-3
Dimension Notes
Length 13.0 cm x Width 4.0 cm x Depth 3.6 cm
Condition Remarks
The clamp was dusty; there were traces of blue-green corrosion on the surface of the object; there were minor signs of wear; all parts move freely.
Copy Type
Original
Reference Types
Book
Reference Comments
"The VWR Canlab Catalogue," VWR Canlab, 1997, p. 451 (similar to image at lower left) (see attached photocopy)
Research Facts
Arrived attached to 000.003.229
Images
Less detail
Dates
1942
circa 1942
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
Accession Number
000003143 a-b
Description
The burette clamp (a) consists of a flat metal bar with a two-pronged clamp at each end; the clamp is made from black painted metal; there is a round, threaded hole bisecting the bar to accomodate bolt (b); a short, metal cylinder surrounds the opening of this hole on the top side of the clamp; two…
  2 images  
Accession Number
000003143 a-b
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
MeSH Heading
Equipment and Supplies
Chemistry
MM= Chemical Apparatus
Description
The burette clamp (a) consists of a flat metal bar with a two-pronged clamp at each end; the clamp is made from black painted metal; there is a round, threaded hole bisecting the bar to accomodate bolt (b); a short, metal cylinder surrounds the opening of this hole on the top side of the clamp; two fenestrated five-sided arms extend downwards on either side of the midpoint of the bar; the clamps at either end consist of a narrow clamping rod, working against a heavy spring; a curved arm extends on either side of the clamping rod to secure the burette in place; there is a rubber band encircling the working end of both clamping rods; bolt (b) consists of a round, threaded metal rod, with a flat end, and a flat, circular turning grip at the top.
Number Of Parts
2
Part Names
a - burette clamp - Size: Length 20.2 cm x Width 9.5 cm x Depth 6.6 cm
b - bolt - Size: Length 5.4 cm x Width 2.3 cm x Depth 0.7 cm
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Fisher
Dates
1942
circa 1942
Date Remarks
Similar to image in 1942 catalogue
Material
metal: silver; black; yellow
rubber: black
Inscriptions
"FISHER // PGH-PA" is stamped into the metal on the top side of the clamp, encircling the bolt hole in the middle bar.
Permanent Location
Storage Room 0010
0010-F7-3
Condition Remarks
The burette clamp arrived very dusty; inactive corrosion covered approximately 50% of the proper right clamp, on both the top and bottom surfaces; a white deposit, 4.5 cm x 2.9 cm, covered the central portion of the bottom surface, surrounding the bolt; both rubber bands are cracking and deteriorating; both clamps move freely, and the bolt shows no signs of corrosion; there are several scratches on most components, showing signs of wear.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"CENCO Scientific Instruments Laboratory Apparatus and Supplies," Catalog JC-141, Central Scientific Co. of Canada, 1942, p. 130 (similar to item #12116) (see attached photocopy); CD #4
Research Facts
For holding two burettes perpendicularly parallel at the proper separation for the greatest convenience in making titrations.
Images
Less detail
Dates
1997
circa 1997
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
Accession Number
000003231
Description
Chain clamp, which consists of a hollow, cylindrical metal rod, inserted into a V-shaped base; the rod has a round opening at each end; at the top of the V-shaped base there is a control knob with gripping lines stamped around it, attached to a threaded metal piece that runs through the top of the …
  2 images  
Accession Number
000003231
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
MeSH Heading
Equipment and Supplies
Chemistry
MM= Chemical Apparatus
Description
Chain clamp, which consists of a hollow, cylindrical metal rod, inserted into a V-shaped base; the rod has a round opening at each end; at the top of the V-shaped base there is a control knob with gripping lines stamped around it, attached to a threaded metal piece that runs through the top of the base; this piece is attached to a flat metal bar that emerges from a slot in the base on the opposite side; at the end of this bar, a chain is attached; the control knob controls the back and forth movement of the bar and chain; the bottom of the base consists of two angled rubberized tips; in the underside of the V-shaped base, the threaded metal piece is visible running through the base attached to the metal bar; this piece is surrounded by a metal spring.
Number Of Parts
1
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Fisher
Site Made (Country)
United States of America
Dates
1997
circa 1997
Date Remarks
Similar to item in 1997 catalogue
Material
metal: silver
rubber: grey
Inscriptions
Above the control knob at the top of the V-shaped base, "FISHER // CASTALOY" appears in raised metal letters.
Permanent Location
Storage Room 0010
0010-F7-3
Dimension Notes
Length 59.8 cm x Width 19.4 cm x Depth 9.5 cm
Condition Remarks
The chain clamp was dusty; there was an oily black deposit on the rubberized tips; there were blue-green patches of corrosion on the inner surface of the rod, as well as several patches on the V-shaped bottom piece; all parts move freely; the chain was rusty.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"The VWR Canlab Catalogue," VWR Canlab, 1997, p. 452 (similar to image at centre left) (see attached photocopy); CD #4
Images
Less detail

condenser clamp

https://mhc.andornot.com/en/permalink/artifact4700
Dates
1942
circa 1942
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
Accession Number
000003146 a-b
Description
Condenser clamp (a), consisting of a round, hollow metal rod 13.2 cm in length joined to a two-pronged, screw-controlled clamp; the tips of the clamp face each other and curve inwards in a shallow U-shaped bend; these tips are rectangular in shape, and are rubberized with a grey substance; the clam…
  2 images  
Accession Number
000003146 a-b
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
MeSH Heading
Equipment and Supplies
Chemistry
MM= Chemical Apparatus
Description
Condenser clamp (a), consisting of a round, hollow metal rod 13.2 cm in length joined to a two-pronged, screw-controlled clamp; the tips of the clamp face each other and curve inwards in a shallow U-shaped bend; these tips are rectangular in shape, and are rubberized with a grey substance; the clamp component is 9.5 cm long and the two clamping prongs are joined 2.7 cm from the bottom of the clamp by a threaded bolt, encircled by a spring; the bolt is secured with a washer (not numbered) and a wingnut (b); the gripping action of the clamp is controlled by turning the wingnut in either direction.
Number Of Parts
2
Part Names
a - condenser clamp - Size: Length 23.0 cm x Width 7.0 cm x Depth 2.5 cm
b - wingnut - Size: Length 1.0 cm x Width 2.0 cm x Depth 0.9 cm
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Fisher
Dates
1942
circa 1942
Date Remarks
Similar to image in 1942 catalogue, but rubberizing is absent
Material
metal: silver
rubber: grey
Inscriptions
"FISHER" appears in raised metal letters on the outer side of both clamp prongs; on the inner surface of one prong, "1543-1 [filled circle with a line across the centre]" appears in slightly raised letters, and on the inner surface of the other prong, "1543-2 [filled circle with a line across the centre]" appears in slightly raised letters; obscured partially by the rubberized portion of this last prong, the letters, "ALOY" are visible in raised metal letters; the first letters of this word are not discernable (000.003.149a,b has "CASTALOY")
Permanent Location
Storage Room 0010
0010-F7-3
Condition Remarks
The clamp arrived dusty and dirty; the rubberized coating on the clamp prong tips is deteriorating; it is splitting on the edges of the clamp and shows brownish discolouration; patches of bluish-green corrosion have developed on the prongs near the tips, particularly on the prong numbered "1543-2"; the largest patch is 0.4 cm x 0.6 cm; the clamp shows signs of wear in the form of abrasions; parts move freely.
Copy Type
Original
Reference Types
Book
Other
JPG
Reference Comments
"CENCO Scientific Instruments Laboratory Apparatus and Supplies," Catalog JC-141, Central Scientific Co. of Canada, 1942, p. 131 (similar to item #12137) (see attached photocopy); also similar to 000.003.149a,b; CD #4
Research Facts
Similar to the object in catalogue, but controlled by a bolt and wingnut rather than a turning disk; used to secure glass condensers and other large objects.
Images
Less detail

condenser clamp

https://mhc.andornot.com/en/permalink/artifact4697
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
Accession Number
000003149 a-b
Description
Condenser clamp (a), consisting of a round, hollow metal rod 13.3 cm in length joined to a two-pronged, screw-controlled clamp; the rectangular tips of the clamp face each other and curve inwards in a shallow U-shaped bend; one of these tips is partially covered with a coarse cotton cloth; the clam…
  1 image  
Accession Number
000003149 a-b
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
MeSH Heading
Equipment and Supplies
Chemistry
MM= Chemical Apparatus
Description
Condenser clamp (a), consisting of a round, hollow metal rod 13.3 cm in length joined to a two-pronged, screw-controlled clamp; the rectangular tips of the clamp face each other and curve inwards in a shallow U-shaped bend; one of these tips is partially covered with a coarse cotton cloth; the clamp component is 9.3 cm long, and the two clamping prongs are joined 2.7 cm from the bottom of the clamp by a threaded bolt, encircled by a spring; the bolt is secured with a wingnut (b); the gripping action of the clamp is controlled by turning the wingnut in either direction.
Number Of Parts
2
Part Names
a - condenser clamp - Size: Length 22.4 cm x Width 7.0 cm x Depth 2.7 cm
b - wingnut - Size: Length 1.2 cm x Width 2.5 cm x Depth 1.1 cm
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Fisher
Material
metal: silver
fabric: white
Inscriptions
"FISHER" appears in raised metal letters on the outer side of both clamp prongs; on the inner surface of one prong, "1543-1 [filled circle with a line across the centre]" appears in slightly raised letters, and on the inner surface of the other prong, "1543-2 [filled circle with a line across the centre]" appears in slightly raised letters; "CASTALOY" appears in raised metal letters near the tip of the prong nearest the wingnut.
Permanent Location
Storage Room 0010
0010-F7-3
Condition Remarks
The condenser clamp shows signs of heavy use; there are scratches and abrasions on the metal; a metal washer that fits between the wingnut and the surface of the clamp is missing; cotton cloth that once covered one, if not both, clamp prong tips, only partially remains, and is frayed and stained; patches of blue-green corrosion are visible at the edges of the cloth that remains; the clamp was dusty; parts move freely
Copy Type
Original
Reference Types
Book
Other
JPG
Reference Comments
"CENCO Scientific Instruments Laboratory Apparatus and Supplies," Catalog JC-141, Central Scientific Co. of Canada, 1942, p. 131 (similar to item #12137) (see attached photocopy); also similar to 000.003.146a,b; CD #4
Research Facts
Similar to the object in catalogue, but controlled by a bolt and wingnut rather than a turning disk
Images
Less detail

double burette clamp

https://mhc.andornot.com/en/permalink/artifact4804
Dates
1933
circa 1933
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
Accession Number
000003226
Description
Fisher burette holder, which consists of a flat, X-shaped piece of metal with a central screw and rubberized arm tips; two additional arms are set at each end between the main arms, and can be moved inwards via heavy coiled springs attached to the underside of the clamp; the tips of each arm are ru…
  3 images  
Accession Number
000003226
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
MeSH Heading
Equipment and Supplies
Chemistry
MM= Chemical Apparatus
Description
Fisher burette holder, which consists of a flat, X-shaped piece of metal with a central screw and rubberized arm tips; two additional arms are set at each end between the main arms, and can be moved inwards via heavy coiled springs attached to the underside of the clamp; the tips of each arm are rubberized, and each has a rounded peg extending vertically from its surface; in the centre of the underside, there is a solid, thick metal hook extending vertically beside the screw.
Number Of Parts
1
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Fisher
Site Made (Country)
United States of America
Dates
1933
circa 1933
Date Remarks
Patent date
Material
metal: silver
rubber: black
Inscriptions
In the centre of the top surface, in raised metal letters: "FISHER BURETTE HOLDER // CASTALOY"; on the underside of the clamp in raised metal letters: "PAT'D JUNE 1933 // MADE IN U.S.A."
Permanent Location
Storage Room 0010
0010-F7-3
Dimension Notes
Length 25.8 cm x Width 13.5 cm x Depth 8.1 cm
Condition Remarks
A bluish-green corrosion was covering the metal arms in patches closest to the rubberized tips; the underside also showed signs of this corrosion; a chip of the metal plate had come away from the top surface of the clamp; there was a white residue on portions of the rubber tips; the clamp was dusty; all parts moved freely.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"The VWR Canlab Catalogue," VWR Canlab U.S.A., 1997, p. 452 (similar to item at top left) (see attached photocopy); CD #4
Images
Less detail
Dates
1997
circa 1997
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
Accession Number
000003148 a-b
Description
The hook connector (a) consists of a flat, rectangular base with a round, threaded hole in the centre to accomodate a bolt (b); two flat, metal walls extend up from the base at a 90° angle, on the two longer sides; both walls taper to form two rounded, hook-like extensions; when the bolt (b) is in…
  1 image  
Accession Number
000003148 a-b
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
MeSH Heading
Equipment and Supplies
Chemistry
MM= Chemical Apparatus
Description
The hook connector (a) consists of a flat, rectangular base with a round, threaded hole in the centre to accomodate a bolt (b); two flat, metal walls extend up from the base at a 90° angle, on the two longer sides; both walls taper to form two rounded, hook-like extensions; when the bolt (b) is inserted into the hole in the base to its full extent, the blunt end of the bolt rests between the two walls, just above the beginning of the tapered hook component; at the opposite end of the bolt, there is a flat, oval turning grip with raised metal lines on its top and bottom surfaces.
Number Of Parts
2
Part Names
a - clamp - Size: Length 4.6 cm x Width 2.2 cm x Depth 2.4 cm
b - bolt - Size: Length 4.6 cm x Width 2.4 cm x Depth 2.7 cm
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Fisher
Dates
1997
circa 1997
Date Remarks
Similar to item found in 1997 catalogue
Material
metal: silver
Inscriptions
"FLEXAFRAME" appears in raised metal letters on the outer surface of one wall, near the screw's turning grip end; "FISHER" appears in raised metal letters in the same location on the opposite wall.
Permanent Location
Storage Room 0010
0010-F7-3
Condition Remarks
The hook connector shows moderate signs of wear in the form of scratches and gouges; a 0.4 cm-long chip of plating has flaked away, along the inner edge of one hook extension; the hook was dusty, and when cleaned with a cotton swab and alcohol, bluish-green traces of corrosion were seen on the swab; parts move freely
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"The VWR Canlab Catalogue," VWR Canlab U.S.A., 1997, p. 461 (similar to item in bottom right figure) (see attached photocopy); CD #4
Images
Less detail

three-pronged clamp

https://mhc.andornot.com/en/permalink/artifact4805
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
Accession Number
000003227
Description
Three-pronged clamp consists of a hollow, metal cylindrical rod with a blunt, flat tip with a round opening at one end, and a clamping mechanism at the other; a V-shaped component is attached to the rod nearest the clamping end; there is a screw bolt on either side of the V-shaped component that co…
  1 image  
Accession Number
000003227
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
MeSH Heading
Equipment and Supplies
Chemistry
MM= Chemical Apparatus
Description
Three-pronged clamp consists of a hollow, metal cylindrical rod with a blunt, flat tip with a round opening at one end, and a clamping mechanism at the other; a V-shaped component is attached to the rod nearest the clamping end; there is a screw bolt on either side of the V-shaped component that controls the clamping action of the prongs; the prongs extend from within the V-shaped piece; one prong is single, with a rubberized tip, while the other splits to form two prongs; they are joined by a central screw, and tension is provided by a coiled spring.
Number Of Parts
1
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Fisher
Site Made (Country)
United States of America
Material
metal: silver
rubber: grey
Inscriptions
In raised metal letters on one side of the central V-shaped piece, "FISHER // U.S.A." appears; on the opposite side of the central V-shaped piece, "CASTALOY - R // ®" appears in raised metal letters; on the inside of the single prong, " [symbol: 'o j' in a circle that has a little tail underneath it] 5376-3" appears in raised metal letters, and on the inside of the double prong, "[symbol] 5376 - 2" appears in raised metal letters.
Permanent Location
Storage Room 0010
0010-F7-3
Dimension Notes
Length 26.7 cm x Width 11.5 cm x Depth 4.3 cm
Condition Remarks
The clamp was dusty; it showed minor signs of wear; the rubberized tips were scuffed, and the rubber on the inside of the single prong had been damaged; there was a loose flap of rubber, exposing the metal underneath; all parts move freely.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"The VWR Canlab Catalogue," VWR Canlab, 1997, p. 450 (similar to image at top) (see attached photocopy); CD #4
Research Facts
Arrived attached to 000.003.228
Images
Less detail

three-pronged clamp

https://mhc.andornot.com/en/permalink/artifact4807
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
Accession Number
000003229
Description
Three-pronged clamp consists of a hollow, metal cylindrical rod with a blunt, flat tip with a round opening at one end, and a clamping mechanism at the other; a V-shaped component is attached to the rod nearest the clamping end; there is a screw bolt on either side of the V-shaped component that co…
  1 image  
Accession Number
000003229
Collection
Rockwood / Kingston Psychiatric Hospital / Providence Continuing Care Centre Collection
Category
Basic Science Artifacts
Classification
Basic Science, Chemistry
MeSH Heading
Equipment and Supplies
Chemistry
MM= Chemical Apparatus
Description
Three-pronged clamp consists of a hollow, metal cylindrical rod with a blunt, flat tip with a round opening at one end, and a clamping mechanism at the other; a V-shaped component is attached to the rod nearest the clamping end; there is a screw bolt on either side of the V-shaped component that controls the clamping action of the prongs; the prongs extend from within the V-shaped piece; one prong is single, with a rubberized tip, while the other splits to form two prongs; they are joined by a central screw, and tension is provided by a coiled spring.
Number Of Parts
1
Provenance
Used at the Kingston Psychiatric Hospital
Maker
Fisher
Site Made (Country)
United States of America
Material
metal: silver
rubber: red-orange
Inscriptions
In raised metal letters on one side of the central V-shaped piece, "FISHER // U.S.A." appears; on the opposite side of the central V-shaped piece, "CASTALOY - R // ®" appears in raised metal letters; on the inside of the single prong, " [symbol: 'o j' in a circle that has a little tail underneath it] 3376-3" appears in raised metal letters, and on the inside of the double prong, "[symbol] 3376 - 2" appears in raised metal letters.
Permanent Location
Storage Room 0010
0010-F7-3
Dimension Notes
Length 27.0 cm x Width 10.6 cm x Depth 4.4 cm
Condition Remarks
The clamp was dusty; it showed minor signs of wear; the rubberized tips were scuffed, and the rubber is cracking and deteriorating; there were moderate patches of grey-green corrosion; all parts move freely.
Copy Type
Original
Reference Types
Book
JPG
Reference Comments
"The VWR Canlab Catalogue," VWR Canlab, 1997, p. 450 (similar to image at top) (see attached photocopy); CD #4
Research Facts
Arrived attached to 000.003.230
Images
Less detail

11 records – page 1 of 2.