Skip header and navigation

Refine By

   MORE

6 records – page 1 of 1.

bipolar electrosurgical forceps

https://mhc.andornot.com/en/permalink/artifact12115
Dates
1980
85
circa 1980-85
Collection
Society of Obstetricians & Gynaecologists of Canada (SOGC) Collection
Category
Diagnostic & Treatment Artifacts
Classification
Gynaecology
Accession Number
007023006
Description
Bipolar electrosurgical forceps white plastic cylinder style with rod portion covered with a semi-opaque white plastic; sheathed rod containing metal wires with a pair of unsheathed pincer ends protruding; plastic button at top of handle; attached at bottom of handle 293.0 cm wiring ending with ele…
  1 image  
Accession Number
007023006
Collection
Society of Obstetricians & Gynaecologists of Canada (SOGC) Collection
Category
Diagnostic & Treatment Artifacts
Classification
Gynaecology
MeSH Heading
Electrosurgery
Electrocoagulation -- instrumentation
Grasping and Fixating -- forceps
Description
Bipolar electrosurgical forceps white plastic cylinder style with rod portion covered with a semi-opaque white plastic; sheathed rod containing metal wires with a pair of unsheathed pincer ends protruding; plastic button at top of handle; attached at bottom of handle 293.0 cm wiring ending with electrosurgical generator adaptor cable.
Number Of Parts
1
Provenance
Designed and prototype used by Dr. Jacques-Emile Rioux, MD, MPH, FACOG.; part of the SOGC historical collection.
Maker
s. e. m. i.
Dates
1980
85
circa 1980-85
Date Remarks
Date of final evolution of prototypes. The designer, Dr. Rioux, provided date of this prototype.
Material
plastic: white, grey, red, blue, yellow
metal: black
Inscriptions
Embossed on handle: "s.e.m.i."; embossed on cable connector: "neomed".
Permanent Location
Storage Room 0010
0010-D7-10
Dimension Notes
Length 30.0 cm x Width 3.0 cm x Depth 2.3 cm
Copy Type
Original
Reference Types
Book
Document
Internet
JPG
Reference Comments
"Journal of Obstetrics and Gynecology Canada," Oct. 2006, pp 909-12; both hard copy and from journal Web site; "Electrical Considerations of Laparoscopic Sterilization" in The Journal of Reproductive Medicine, Oct. 1973, Vol. II No. 4; CD #2.
Research Facts
Used in OG/GYN laparoscopy surgical procedures.
Exhibit History
S.O.G.C. Headquarters in Ottawa, Ontario exhibit "Safe Laparoscopic Tubal Sterilisation: A Made-in-Canada Solution"--May 28, 2008 - May 30, 2010
Images
Less detail

bipolar electrosurgical Palmer's forceps

https://mhc.andornot.com/en/permalink/artifact12110
Dates
1973
circa 1973
Collection
Society of Obstetricians & Gynaecologists of Canada (SOGC) Collection
Category
Diagnostic & Treatment Artifacts
Classification
Gynaecology
Accession Number
007023001
Description
Bipolar electrosurgical Palmer's forceps is a rod shape with a semi- opaque white plastic sheathed rod containing metal wires with a pair of unsheathed pincer ends protruding; the handle is in the shape of two finger rings on both sides and one at the end; a pair of electrical connecting rods are …
  1 image  
Accession Number
007023001
Collection
Society of Obstetricians & Gynaecologists of Canada (SOGC) Collection
Category
Diagnostic & Treatment Artifacts
Classification
Gynaecology
MeSH Heading
Electrosurgery
Electrocoagulation -- instrumentation
Grasping and Fixating -- forceps
Description
Bipolar electrosurgical Palmer's forceps is a rod shape with a semi- opaque white plastic sheathed rod containing metal wires with a pair of unsheathed pincer ends protruding; the handle is in the shape of two finger rings on both sides and one at the end; a pair of electrical connecting rods are above the finger rings; without manufacturer's marks.
Number Of Parts
1
Provenance
Designed and prototype used by Dr. Jacques-Emile Rioux, MD, MPH, FACOG.; part of the SOGC historical collection.
Maker
CRIQ - Centre de recherche industrielle du Québec
Site Made (City)
Ste. Foy
Site Made (State)
Quebec
Site Made (Country)
Canada
Dates
1973
circa 1973
Date Remarks
Date of this prototype was provided by the designer, Dr. Rioux.
Material
plastic: white
metal: silver, yellow
Permanent Location
Storage Room 0010
0010-D7-10
Dimension Notes
Length 31.5 cm x Width 7.0 cm x Depth 2.8 cm
Condition Remarks
Shows some wear around edges.
Copy Type
Original
Reference Types
Book
Document
Internet
JPG
Reference Comments
"Journal of Obstetrics and Gynecology Canada," Oct. 2006, pp 909-12; both hard copy and from journal Web site; "Electrical Considerations of Laparoscopic Sterilization" in The Journal of Reproductive Medicine, Oct. 1973, Vol. II No. 4; CD #2
Research Facts
First bipolar electrosurgical forceps prototype designed by Canadian Dr. Rioux, who is acknowledged as the first doctor to bring this technique to Canada. Rioux trained at Laval, Quebec and at Johns Hopkins, US also in Paris, France under Dr. Raoul Palmer (1967-68) who used only unipolar electrosurgical forceps in endoscopic surgeries / laparoscopies. Rioux performed the first of these at Johns Hopkins in 1968. Instrument is used for OB/GYN laparoscopic surgeries such as an electrocoagulation of the tubes for sterilization, where a pure coagulating current was applied and burned the tube, instead of previously burning through other areas. Several research articles concerning this Canadian invention by Dr. Rioux, and on the designer are located in the donor file.
Exhibit History
S.O.G.C. Headquarters in Ottawa, Ontario exhibit "Safe Laparoscopic Tubal Sterilisation: A Made-in-Canada Solution"--May 28, 2008 - May 30, 2010
Images
Less detail

Rioux bipolar electrosurgical forceps

https://mhc.andornot.com/en/permalink/artifact12111
Dates
1973
circa 1973
Collection
Society of Obstetricians & Gynaecologists of Canada (SOGC) Collection
Category
Diagnostic & Treatment Artifacts
Classification
Gynaecology
Accession Number
007023002
Description
Rioux bipolar electrosurgical forceps with a metal gun-shaped handle and rod portion covered with a semi-opaque white plastic sheathed rod containing metal wires with a pair of unsheathed pincer ends protruding; flat piece of clear plastic has hole cut out for trigger; without manufacturers marks.
  1 image  
Accession Number
007023002
Collection
Society of Obstetricians & Gynaecologists of Canada (SOGC) Collection
Category
Diagnostic & Treatment Artifacts
Classification
Gynaecology
MeSH Heading
Electrosurgery
Electrocoagulation -- instrumentation
Grasping and Fixating -- forceps
Description
Rioux bipolar electrosurgical forceps with a metal gun-shaped handle and rod portion covered with a semi-opaque white plastic sheathed rod containing metal wires with a pair of unsheathed pincer ends protruding; flat piece of clear plastic has hole cut out for trigger; without manufacturers marks.
Number Of Parts
1
Provenance
Designed and prototype used by Dr. Jacques-Emile Rioux, MD, MPH, FACOG.; part of the SOGC historical collection.
Maker
CRIQ - Centre de recherche industrielle du Québec
Site Made (City)
Ste. Foy
Site Made (State)
Quebec
Site Made (Country)
Canada
Dates
1973
circa 1973
Date Remarks
Date of second evolution of this style of prototype. The designer, Dr. Rioux, provided date of this prototype.
Material
plastic: translucent, white, red
metal: silver
Permanent Location
Storage Room 0010
0010-D7-10
Dimension Notes
Length 32.5 cm x Width 13.3 cm x Depth 3.0 cm
Condition Remarks
Shows some wear around edges and minor scratches on metal.
Copy Type
Original
Reference Types
Book
Document
Internet
JPG
Reference Comments
"Journal of Obstetrics and Gynecology Canada," Oct. 2006, pp 909-12; both hard copy and from journal Web site; "Electrical Considerations of Laparoscopic Sterilization" in The Journal of Reproductive Medicine, Oct. 1973, Vol. II No. 4; CD #2.
Research Facts
This gun-style of handle in metal proved to be too heavy, and was the second style in the evolution of the protoypes. First bipolar electrosurgical forceps prototype designed by Canadian Dr. Rioux, who is acknowledged as the first doctor to bring this technique to Canada. Rioux trained at Laval, Quebec and at Johns Hopkins, US also in Paris, France under Dr. Raoul Palmer who used only unipolar electrosurgical forceps (1967-68) in endoscopic surgeries / laparoscopies. Rioux performed the first of these at Johns Hopkins in 1968. Instrument is used for OB/GYN laparoscopic surgeries such as an electrocoagulation of the tubes for sterilization, where a pure coagulating current was applied and burned the tube, instead of previously burning through other areas. Several research articles concerning this Canadian invention by Dr. Rioux, and on the designer are located in the donor file.
Exhibit History
S.O.G.C. Headquarters in Ottawa, Ontario exhibit "Safe Laparoscopic Tubal Sterilisation: A Made-in-Canada Solution"--May 28, 2008 - May 30, 2010
Images
Less detail

Rioux bipolar electrosurgical forceps

https://mhc.andornot.com/en/permalink/artifact12112
Dates
1973
circa 1973
Collection
Society of Obstetricians & Gynaecologists of Canada (SOGC) Collection
Category
Diagnostic & Treatment Artifacts
Classification
Gynaecology
Accession Number
007023003
Description
Bipolar electrosurgical forcep with a gun-shaped handle and rod portion covered with a semi-opaque white plastic; sheathed rod containing metal wires with a pair of unsheathed pincer ends protruding; flat piece of semi-opaque white plastic has hole cut out for trigger; small red button on top of ha…
  1 image  
Accession Number
007023003
Collection
Society of Obstetricians & Gynaecologists of Canada (SOGC) Collection
Category
Diagnostic & Treatment Artifacts
Classification
Gynaecology
MeSH Heading
Electrosurgery
Electrocoagulation -- instrumentation
Grasping and Fixating -- forceps
Description
Bipolar electrosurgical forcep with a gun-shaped handle and rod portion covered with a semi-opaque white plastic; sheathed rod containing metal wires with a pair of unsheathed pincer ends protruding; flat piece of semi-opaque white plastic has hole cut out for trigger; small red button on top of handle; built in wiring cut off at bottom of handle; parts are screwed on through recessed holes; without manufacturers marks.
Number Of Parts
1
Provenance
Designed and prototype used by Dr. Jacques-Emile Rioux, MD, MPH, FACOG.; part of the SOGC historical collection.
Maker
CRIQ - Centre de recherche industrielle du Québec
Site Made (City)
Ste. Foy
Site Made (State)
Quebec
Site Made (Country)
Canada
Dates
1973
circa 1973
Date Remarks
Date of third evolution of this style of prototype, second in the gun handle style. The designer, Dr. Rioux, provided date of this prototype.
Material
plastic: white, red, black
metal: silver, white
Permanent Location
Storage Room 0010
0010-D7-10
Dimension Notes
Length 36.2 cm x Width 12.7 cm x Depth 2.8 cm
Condition Remarks
Shows some wear around edges and minor discolouration around seams from use.
Copy Type
Original
Reference Types
Book
Document
Internet
JPG
Reference Comments
"Journal of Obstetrics and Gynecology Canada," Oct. 2006, pp 909-12; both hard copy and from journal Web site; "Electrical Considerations of Laparoscopic Sterilization" in The Journal of Reproductive Medicine, Oct. 1973, Vol. II No. 4; CD #2.
Research Facts
This gun-style of handle was considered to be too military looking, and was the second style in the evolution of the gun handle protoypes. First bipolar electrosurgical forceps prototype designed by Canadian Dr. Rioux, who is acknowledged as the first doctor to bring this technique to Canada. Rioux trained at Laval, Quebec and at Johns Hopkins, US also in Paris, France under Dr. Raoul Palmer who used only unipolar electrosurgical forceps (1967-68) in endoscopic surgeries / laparoscopies. Rioux performed the first of these at Johns Hopkins in 1968. Instrument is used for OB/GYN laparoscopic surgeries such as an electrocoagulation of the tubes for sterilization, where a pure coagulating current was applied and burned the tube, instead of previously burning through other areas. Several research articles concerning this Canadian invention by Dr. Rioux, and on the designer are located in the donor file.
Exhibit History
S.O.G.C. Headquarters in Ottawa, Ontario exhibit "Safe Laparoscopic Tubal Sterilisation: A Made-in-Canada Solution"--May 28, 2008 - May 30, 2010
Images
Less detail

Rioux bipolar electrosurgical forceps

https://mhc.andornot.com/en/permalink/artifact12113
Dates
1973
circa 1973
Collection
Society of Obstetricians & Gynaecologists of Canada (SOGC) Collection
Category
Diagnostic & Treatment Artifacts
Classification
Gynaecology
Accession Number
007023004
Description
Rioux bipolar electrosurgical forceps with an orange and semi-opaque white plastic ergonomically designed gun-shaped handle with rod portion covered with a semi-opaque white plastic; sheathed rod containing metal wires with a pair of unsheathed pincer ends protruding; flat piece of semi-opaque whit…
  2 images  
Accession Number
007023004
Collection
Society of Obstetricians & Gynaecologists of Canada (SOGC) Collection
Category
Diagnostic & Treatment Artifacts
Classification
Gynaecology
MeSH Heading
Electrosurgery
Electrocoagulation -- instrumentation
Grasping and Fixating -- forceps
Description
Rioux bipolar electrosurgical forceps with an orange and semi-opaque white plastic ergonomically designed gun-shaped handle with rod portion covered with a semi-opaque white plastic; sheathed rod containing metal wires with a pair of unsheathed pincer ends protruding; flat piece of semi-opaque white plastic trigger; built in component for attached wiring; attached prototype and manufacturers metal label.
Number Of Parts
1
Provenance
Designed and prototype used by Dr. Jacques-Emile Rioux, MD, MPH, FACOG.; part of the SOGC historical collection.
Maker
CRIQ - Centre de recherche industrielle du Québec
Site Made (City)
Ste. Foy
Site Made (State)
Quebec
Site Made (Country)
Canada
Dates
1973
circa 1973
Date Remarks
Date of third evolution of this style of prototype. The designer, Dr. Rioux, provided date of this prototype.
Material
plastic: orange, white, black
metal: silver, white
Inscriptions
Printed on metal label: "RIOUX BIPOLAR // TUBAL FORCEPS // PROTOTYPE no. 3 // made // specially for // JAROSLAV F. // HULKA M. D. "
Permanent Location
Storage Room 0010
0010-D7-10
Dimension Notes
Length 33.5 cm x Width 15.5 cm x Depth 3.7 cm
Condition Remarks
Shows some wear around edges and minor discolouration around seams from use.
Copy Type
Original
Reference Types
Book
Document
Internet
JPG
Reference Comments
"Journal of Obstetrics and Gynecology Canada," Oct. 2006, pp 909-12; both hard copy and from journal Web site; "Electrical Considerations of Laparoscopic Sterilization" in The Journal of Reproductive Medicine, Oct. 1973, Vol. II No. 4; CD #2.
Research Facts
This was the first ergonomically designed gun-style of handle, and was the third style in the evolution of the gun handle protoypes. First bipolar electrosurgical forceps prototype designed by Canadian Dr. Rioux, who is acknowledged as the first doctor to bring this technique to Canada. Rioux trained at Laval, Quebec and at Johns Hopkins, US also in Paris, France under Dr. Raoul Palmer who used only unipolar electrosurgical forceps (1967-68) in endoscopic surgeries / laparoscopies. Rioux performed the first of these at Johns Hopkins in 1968. Instrument is used for OB/GYN laparoscopic surgeries such as an electrocoagulation of the tubes for sterilization, where a pure coagulating current was applied and burned the tube, instead of previously burning through other areas. Several research articles concerning this Canadian invention by Dr. Rioux, and on the designer are located in the donor file.
Exhibit History
S.O.G.C. Headquarters in Ottawa, Ontario exhibit "Safe Laparoscopic Tubal Sterilisation: A Made-in-Canada Solution"--May 28, 2008 - May 30, 2010
Images
Less detail

Rioux bipolar electrosurgical forceps

https://mhc.andornot.com/en/permalink/artifact12114
Dates
1973
circa 1973
Collection
Society of Obstetricians & Gynaecologists of Canada (SOGC) Collection
Category
Diagnostic & Treatment Artifacts
Classification
Gynaecology
Accession Number
007023005
Description
Rioux bipolar electrosurgical forceps with an orange painted metal and semi-opaque white plastic ergonomically designed gun-shaped handle with rod portion covered with a semi-opaque white plastic; sheathed rod containing metal wires with a pair of unsheathed pincer ends protruding; flat piece of or…
  2 images  
Accession Number
007023005
Collection
Society of Obstetricians & Gynaecologists of Canada (SOGC) Collection
Category
Diagnostic & Treatment Artifacts
Classification
Gynaecology
MeSH Heading
Electrosurgery
Electrocoagulation -- instrumentation
Grasping and Fixating -- forceps
Description
Rioux bipolar electrosurgical forceps with an orange painted metal and semi-opaque white plastic ergonomically designed gun-shaped handle with rod portion covered with a semi-opaque white plastic; sheathed rod containing metal wires with a pair of unsheathed pincer ends protruding; flat piece of orange painted metal trigger; plastic button at top of handle; attached wiring cut off at bottom of handle; without manufacturers label.
Number Of Parts
1
Provenance
Designed and prototype used by Dr. Jacques-Emile Rioux, MD, MPH, FACOG.; part of the SOGC historical collection.
Maker
CRIQ - Centre de recherche industrielle du Québec
Site Made (City)
Ste. Foy
Site Made (State)
Quebec
Site Made (Country)
Canada
Dates
1973
circa 1973
Date Remarks
Date of third evolution of this style of prototype. The designer, Dr. Rioux, provided date of this prototype.
Material
plastic: white
metal: white
paint: orange
Permanent Location
Storage Room 0010
0010-D7-10
Dimension Notes
Length 33.8 cm x Width 12.5 cm x Depth 3.5 cm
Condition Remarks
Shows some wear around edges and minor discolouration around seams from use.
Copy Type
Original
Reference Types
Book
Document
Internet
JPG
Reference Comments
"Journal of Obstetrics and Gynecology Canada," Oct. 2006, pp 909-12; both hard copy and from journal Web site; "Electrical Considerations of Laparoscopic Sterilization" in The Journal of Reproductive Medicine, Oct. 1973, Vol. II No. 4; CD #2.
Research Facts
This was the second ergonomically designed gun-style of handle, and was the fourth style in the evolution of the gun handle protoypes. First bipolar electrosurgical forceps prototype designed by Canadian Dr. Rioux, who is acknowledged as the first doctor to bring this technique to Canada. Rioux trained at Laval, Quebec and at Johns Hopkins, US also in Paris, France under Dr. Raoul Palmer who used only unipolar electrosurgical forceps (1967-68) in endoscopic surgeries / laparoscopies. Rioux performed the first of these at Johns Hopkins in 1968. Instrument is used for OB/GYN laparoscopic surgeries such as an electrocoagulation of the tubes for sterilization, where a pure coagulating current was applied and burned the tube, instead of previously burning through other areas. Several research articles concerning this Canadian invention by Dr. Rioux, and on the designer are located in the donor file.
Exhibit History
S.O.G.C. Headquarters in Ottawa, Ontario exhibit "Safe Laparoscopic Tubal Sterilisation: A Made-in-Canada Solution"--May 28, 2008 - May 30, 2010
Images
Less detail

6 records – page 1 of 1.