Skip header and navigation

Refine By

16 records – page 1 of 2.

Dates
1970
circa 1970
Collection
Kingston General Hospital Endoscopy Unit Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
994009015 a-g
Description
Paper package of six cream plastic mouth pieces used in patient's mouth for insertion of endoscopes, gastroscopes, etc.; package is for use in autoclave and has marks which turn colour when sterilized; this package has not been in autoclave yet
Accession Number
994009015 a-g
Collection
Kingston General Hospital Endoscopy Unit Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
Description
Paper package of six cream plastic mouth pieces used in patient's mouth for insertion of
endoscopes, gastroscopes, etc.; package is for use in autoclave and has marks which turn
colour when sterilized; this package has not been in autoclave yet
Number Of Parts
7
Part Names
a - package - Size: Length 23.0 cm. x Width 17.1 cm.
b-g - mouthguards - Size: Length 3.0 cm. x Width 2.8 cm. x Depth 2.6 cm.
Provenance
Used on KGH patients
Site Made (Country)
Canada
Dates
1970
circa 1970
Material
paper: white; turquoise
plastic: cream; clear
Inscriptions
Printed on back of package: "BLUE LEAF TURNS GREEN IN GAS // LA FEUILL BLEURE DEVIENT VERTE
DANS LE GAZ // THE GREENLINE TM MADE BY // DRG // CANADA // PINK LEAF TURNS BLACK IN STEAM //
LA FEUILLE ROSE DEVIENT NOIRE SANS LA VAPEUR"; on mouthpieces: "OLYMPUS TOKYO"
Permanent Location
Storage Room 0010
0010-F2-1
Reference Types
Person
Book
Reference Comments
"Chirurgie-Katalog," 24th ed. by Martin, Tuttlingen, Germany, 1978, p. 248; "Catalogue of
Surgical Instruments and Surgical Sundries," miniature edition, Chas. F. Thackray, Ltd.,
Leeds, ca. 1970, p. G17; Claire Kelly, O.R. nurse
Research Facts
Similar in concept and design to airways in two catalogues; used for laser bronchoscopy
Less detail
Dates
1990
circa 1990
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008103
Description
Anaesthetic airway, which consists of a single piece of plastic molded into a flattened hollow tube with a curved 90 deg angle bent tip; the tip half of the tube is open at the top; the base of the airway has a rounded flat piece of plastic attached at the end of the hollow tube.
  2 images  
Accession Number
997008103
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
Description
Anaesthetic airway, which consists of a single piece of plastic molded into a flattened hollow tube with a curved 90 deg angle bent tip; the tip half of the tube is open at the top; the base of the airway has a rounded flat piece of plastic attached at the end of the hollow tube.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario, Canada.
Maker
Airway Intubator Ltd.
Site Made (Country)
Canada
Dates
1990
circa 1990
Date Remarks
Disposable airways used in the 1990's
Material
plastic: pink
Inscriptions
The flat base piece has raised lettering which reads, "PATENT PENDING // DO NOT REUSE // 9 AIRWAY INTUBATOR LTD 9"; the base end of the tube has raised lettering which reads, "MADE // IN // CANADA"
Permanent Location
Storage Room 0010
0010-F2-1
Dimension Notes
Length: 9.3 cm. x Width: 3.1 cm. x Depth: 4.1 cm.
Condition Remarks
The plastic airway arrived dirty and dusty; the plastic shows no chips, cracks or wear; the airway appears to never have been used; #2 no new damage
Copy Type
Original
Reference Types
Person
Reference Comments
John Sikora
Research Facts
The airway was used to hold a patient's tongue down during anaesthetic surgery
Exhibit History
On exhibit in Museum gallery - Anaesthesia exhibit, Nov. 13, 1997-Nov. 2, 2001; returned to storage Dec. 17, 2001
Images
Less detail

anaesthesia mask

https://mhc.andornot.com/en/permalink/artifact1951
Dates
1970
circa 1970
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997008079
Description
Flynn anaesthesia mask, which consists of a mount, body and edge molded from a single piece of plastic; the mount is a short cylindrical hollow open piece; the body is convex-shaped with edges that turn up inside; the plastic is see-through.
  1 image  
Accession Number
997008079
Collection
Hotel Dieu Hospital Dept. of Anaesthesia, Kingston Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask
Description
Flynn anaesthesia mask, which consists of a mount, body and edge molded from a single piece of plastic; the mount is a short cylindrical hollow open piece; the body is convex-shaped with edges that turn up inside; the plastic is see-through.
Number Of Parts
1
Provenance
Purchased by and used at the Hotel Dieu Hospital, Kingston, Ontario, Canada.
Maker
Flynn
Site Made (Country)
Canada
Dates
1970
circa 1970
Date Remarks
Mask dated to the 1970's
Material
plastic: light green
Inscriptions
Raised lettering at the bottom of the body reads, "FLYNN // 3 // MADE IN CANADA // 83-3"
Permanent Location
Storage Room 0010
0010-F2-9
Dimension Notes
Length: 9.1 cm. x Width: 14.1 cm. x Depth: 8.0 cm.
Condition Remarks
The mask arrived dirty and dusty; the plastic is sticky in some areas (even after cleaning) indicating deterioration; the plastic has no cracks or missing sections and is still flexible; minor discolouration of the plastic is visible; #2 no new damage
Copy Type
Original
Reference Types
Person
Reference Comments
Dr. Ray Matthew
Exhibit History
On exhibit in Museum gallery - Anaesthesia exhibit, Oct. 2 1997-Nov. 2, 2001; returned to storage Dec. 17, 2001
Images
Less detail

Baby Ben alarm clock

https://mhc.andornot.com/en/permalink/artifact11153
Dates
1964
1973
1964-1973
Collection
Carson Cross Collection
Category
Patient Care Artifacts
Classification
Patient Care
Accession Number
005011001
Description
A metal "Baby Ben" alarm clock; has a rectangular base with a round face; the face is a slightly lighter shade of silver (aluminum?) and under a circular convex piece of glass; there are dials and knobs on the back for setting the time and alarm.
  2 images  
Accession Number
005011001
Collection
Carson Cross Collection
Category
Patient Care Artifacts
Classification
Patient Care
MeSH Heading
Household Articles
Radium
MM= Household Articles -- ruler, compass, protractor, timepiece
Description
A metal "Baby Ben" alarm clock; has a rectangular base with a round face; the face is a slightly lighter shade of silver (aluminum?) and under a circular convex piece of glass; there are dials and knobs on the back for setting the time and alarm.
Number Of Parts
1
Provenance
Belonged to the donor's family since it was purchased new in Peterborough, Ontario; it was originally loaned to the museum for the "Radium" exhibit.
Maker
Westclox
Site Made (City)
Peterborough
Site Made (State)
Ontario
Site Made (Country)
Canada
Dates
1964
1973
1964-1973
Date Remarks
These clocks were made from 1964 until 1973
Material
metal: silver
glass: clear
Inscriptions
"Baby Ben" and "WESTCLOX" printed on the face "6 // 53632" engraved on the bottom of the base
Permanent Location
Storage Room 0010
0010-F3-10
Dimension Notes
Length 9.0 cm x Width 5.8 cm x Depth 8.3 cm
Condition Remarks
Some wear on the back where the dials have been rotated.
Copy Type
Original
Reference Types
Internet
Reference Comments
"ClockHistory.com"
Research Facts
This is a series 8 Baby Ben clock; clocks with radium arms and dials were used because it glowed; the painters of these clocks (mostly female) often suffered from skin ulcerations, tumours, and many eventually died.
Images
Less detail

Bennett's inhaler

https://mhc.andornot.com/en/permalink/artifact3298
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997001116 a-d
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (…
  1 image  
Accession Number
997001116 a-d
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Administration, Intranasal -- instrumentation
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- inhaler
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (c,d) fit onto and over the ends of the tubes; the tips are both conical in shape with a hollow centre
Number Of Parts
4
Part Names
a - inhaler - Size: Length 13.4 cm x Width 2.9 cm x Depth 2.0 cm
b - cap - Size: Length 1.8 cm x Diam. 2.3 cm
c - tip - Size: Length 1.5 cm x Diam. 1.5 cm
d - tip - Size: Length 1.5 cm x Diam. 1.5 cm
Provenance
Originally owned by Dr. F.J. O'Connor; collected by Dr. A.A. Travill for the Queen's University Faculty of Medicine Collection
Maker
The J.F. Hartz Co.
Site Made (City)
Toronto
Site Made (State)
Ontario
Site Made (Country)
Canada
Material
metal: silver
plastic: black
Inscriptions
(a) The outside of the cannister has the words, "HARTZ CO. // DETROIT - CLEVELAND // TORONTO // PAT. APPL'D FOR" stamped into the metal
Permanent Location
Storage Room 0010
0010-F2-1
Condition Remarks
The metal shows wear, but no corrosion is visible; the bakelite tips are complete and undamaged; #2: returned in same condition.
Copy Type
Original
Reference Types
Book
Document
Other
JPG
Reference Comments
Previous number #182; Faculty of Medicine Collection 1984 Inventory; "Surgical Instruments," The Kny-Scheerer Co., 1915, p. 2001 (item B/-22) (see attached photocopy); "Illustrated Catalog of A Complete Line of Standard Surgical Instruments," by Codman & Shurtleff Inc., c. 1920, p. 23 (item 1253) (see attached photocopy); also see 997.001.117 and .118; CD #3
Exhibit History
May 24 - Sept. 13, 2001: Agnes Etherington Art Centre Museopathy exhibit; Bracken Library Exhibit "Boning Up on Anatomy"; Sept 9, 2002-Sept. 29, 2003
Images
Less detail

Bennett's inhaler

https://mhc.andornot.com/en/permalink/artifact3299
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997001117 a-d
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (…
  1 image  
Accession Number
997001117 a-d
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Administration, Intranasal -- instrumentation
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- inhaler
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (c,d) fit onto and over the ends of the tubes; the tips are both conical in shape with a hollow centre
Number Of Parts
4
Part Names
a - inhaler - Size: Length 13.4 cm x Width 2.8 cm x Depth 2.0 cm
b - cap - Size: Length 1.8 cm x Diam. 2.3 cm
c - tip - Size: Length 1.5 cm x Diam. 1.5 cm
d - tip - Size: Length 1.5 cm x Diam. 1.5 cm
Provenance
Originally owned by Dr. H.C. Mabee; collected by Dr. A.A. Travill for the Queen's University Faculty of Medicine Collection
Maker
The J.F. Hartz Co.
Site Made (City)
Toronto
Site Made (State)
Ontario
Site Made (Country)
Canada
Material
metal: silver
plastic: black
Inscriptions
(a) The outside of the cannister has the words, "HARTZ CO. // DETROIT - CLEVELAND // TORONTO // PAT. APPL'D FOR" stamped into the metal
Permanent Location
Storage Room 0010
0010-F2-1
Condition Remarks
The metal shows wear, but no corrosion is visible; the bakelite tips are complete and undamaged, except for a very small chip missing from the outer tip edge of (a)
Copy Type
Original
Reference Types
Book
Document
Other
JPG
Reference Comments
Previous number #183; Faculty of Medicine Collection 1984 Inventory; "Surgical Instruments," The Kny-Scheerer Co., 1915, p. 2001 (item B/-22) (see attached photocopy); "Illustrated Catalog of A Complete Line of Standard Surgical Instruments," by Codman & Shurtleff Inc., c. 1920, p. 23 (item 1253) (see attached photocopy); also see 997.001.116 and .118; CD #3
Images
Less detail

Boyle anaesthesia apparatus

https://mhc.andornot.com/en/permalink/artifact875
Dates
1958
circa 1958
Collection
Kingston General Hospital Department of Anaesthesiology Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
996006001 a-f
Description
(a) Boyle apparatus with attached tubing, shelf, and heavy glass plate covering drawer on bottom; wheeled; painted green metal; two pressure gauges; rubber hosing; two loose metal pieces in lefthand drawer; three loose plastic pieces in right-hand drawer; halothane vaporizer and monitored dial mixe…
  2 images  
Accession Number
996006001 a-f
Collection
Kingston General Hospital Department of Anaesthesiology Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- machine
Description
(a) Boyle apparatus with attached tubing, shelf, and heavy glass plate covering drawer on bottom;
wheeled; painted green metal; two pressure gauges; rubber hosing; two loose metal pieces in lefthand
drawer; three loose plastic pieces in right-hand drawer; halothane vaporizer and monitored
dial mixer attached; (b) metal part/attachment; roughly "T"-shaped with two movable parts; very
heavy metal tubing, with one opening threaded; flat metal piece with screws; (c) on-off dial; circular,
of grey metal with a dark green plastic edge; (d) small clear plastic tube with six ridges,
three at each end, and a smooth middle section; (e) small plastic tube with six ridges, three at
each end and a smooth moddle section; clear plastic; (f) small clear plastic tube with six ridges,
three at each end and a smooth middle section
Number Of Parts
6
Part Names
a - Boyle Apparatus - Size: Length 130.0 cm. x Width 77.0 cm. x Depth 59.0 cm.
b - T-shaped attachment - Size: Length 16.5 cm. x Width 14.5 cm. x Diameter2.0
c - on-off dial - Size: x Depth 2.0 cm. x Diameter5.8
d - small clear plastic tube - Size: Length 5.8 cm. x Diameter0.5
e - small clear plastic tube - Size: Length 5.8 cm. x Diameter0.5
f - small clear plastic tube - Size: Length 5.8 cm. x Diameter0.5
Provenance
Donated to Museum by Anaesthesiology at KGH
Maker
Medishield
Site Made (City)
Rexdale
Site Made (State)
Ontario
Site Made (Country)
Canada
Dates
1958
circa 1958
Date Remarks
Halothane first used for dental extractions in 1958 in Britain; later used in hospital work
Material
metal: silver; green
glass: clear
rubber: black; green
plastic: yellow; clear; red; blue; white; green
Inscriptions
Label on front reads, "THE BOYLE // apparatus // BY THE BRITISH OXYGEN GO LTD"; label on back
reads, "Medishield // 172 Belfield Road // Rexdale, Ontario // Boyle Anaesthesia Apparatus"
Permanent Location
Storage Room W1
W1-5-1
Condition Remarks
(a) numerous scratches on painted metal surfaces; scratches and discolouration on non-painted
metal surfaces; rubber tubing beginning to crack and dry out; glass on nitrous oxide pressure
gauge warped, yellowed and pitted; remains of masking tape on working surface, and red "KGH 2"
label; (b) shows considerable evidence of wear; metal along main shaft is pitted and scratched in
several places; several scratches also on flat piece; circular movable part is scratched, discoloured
and very worn; metal is turning green in a few places; screws are beginning to rust; (c)
shows signs of wear; metal is blackened in places, especially on the back, as well as quite
scratched, again more on the back; (d-f) no marks or scratches
Copy Type
Original
Reference Types
Person
Book
JPG
Reference Comments
"Under the Influence: A History of Nitrous Oxide and Oxygen Anaesthesia", by W.D.A. Smith, pp. 168-169; Dr. Stuart Vandewater; CD #1
Research Facts
See photocopies attached to accession sheet; (message left at Anaesthesiology, KGH to have Dr.
Dawson Einarson contact Heather Blyth re use and operation of machine)
Images
Less detail

circle anaesthesia system

https://mhc.andornot.com/en/permalink/artifact2006
Dates
1997
circa 1997
Collection
Kingston General Hospital Dept. of Anaesthesia Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997023004 a-c
Description
Circle anaesthesia system, which consists of (a) two lengths of clear plastic corrugated breathing hose, joined together at one end to form a single round opening (for attachment of (b), the gas sampling elbow); the single tube ends are both round and open (for attachment to inlet and outlet nozzle…
Accession Number
997023004 a-c
Collection
Kingston General Hospital Dept. of Anaesthesia Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
Description
Circle anaesthesia system, which consists of (a) two lengths of clear plastic corrugated breathing
hose, joined together at one end to form a single round opening (for attachment of (b), the gas
sampling elbow); the single tube ends are both round and open (for attachment to inlet and outlet
nozzles on an absorber); (b) the gas sampling elbow attaches onto the single opening on (a); the
elbow is made of a hollow cylindrical piece of clear plastic tubing bent at a 90 deg. angle; there
is a blue plastic cap just above the bend which covers a round hole in the tubing; both ends of the
elbow are open and round; one end fits into (a), the other is for the attachment of an anaesthesia
mask; (c) anaesthetic rebreathing mask which is made of a single piece of oval-shaped hollow grey
rubber, tapered at both ends; the bottom and sides are closed and there is a closed cylindrical
piece at the bottom; the top of the bag is open with a round plastic connector inserted in and
taped on to provide an airtight seal; information is stamped on the back in black lettering; Note: Item is missing (Nov. 2005)
Number Of Parts
3
Part Names
a - two joined hoses - Size: Length 113.8 cm. x Width 4.9 cm. x Depth 2.8 cm.
b - gas sampling elbow - Size: Length 5.5 cm. x Width 5.0 cm. x Depth 2.4 cm.
c - rebreathing bag (uninflated) - Size: Length 32.7 cm. x Width 8.4 cm. x Depth 3.1 cm.
Provenance
Purchased by and used at the Kingston General Hospital, Kingston, Ontario, Canada
Maker
Baxter Corporation
Site Made (City)
Toronto
Site Made (State)
Ontario
Site Made (Country)
Canada
Dates
1997
circa 1997
Date Remarks
Taken from stock currently being used at Kingston General Hospital
Material
rubber: grey
plastic: grey; clear; blue
tape: white
Inscriptions
(a) the number "4" is raised on the plastic where the two tubes join; (c) the rebreathing bag is
stamped "2L // SINGLE USE ONLY // NON CONDUCTIVE"; manufacturing information listed on a piece of
paper enclosed with the system reads, "Cat. 19408-212 // Baxter // Circle // Anaesthesia // System
// 22 mm x 120 cm (40") // with Gas Sampling Elbow // 2 Litre Rebreather Bag // (L) A7E07 // Single
Patient Use // Made in Canada // Distributed by // Baxter Corporation // Toronto, Ontario, Canada"
-- in English and French (original attached)
Permanent Location
Storage Room 0009
0009-1
Temporary Location
Item is missing.
Condition Remarks
The system arrived new and in its original packaging; #2 no new damage
Copy Type
Original
Reference Types
Person
Other
Reference Comments
Dr. Ray Matthews; see product information label (attached)
Research Facts
Circle anaesthesia system was puto onto the Ohio Modulus Anaesthetic Gas Machine (on loan from
OHMEDA - a division of BOC Canada Ltd.) by Dr. Matthews
Exhibit History
On exhibit in Museum gallery, Anaesthesia exhibit, Oct. 2 1997-Oct. 24, 2001
Less detail
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
1975.8.13
Description
A metal cylinder with a paper label glued on; nozzle at one end; box is unnumbered. bottle; box
  1 image  
Accession Number
1975.8.13
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- substance
Description
A metal cylinder with a paper label glued on; nozzle at one end; box is unnumbered. bottle; box
Number Of Parts
1
Provenance
Acquired from the Academy of Medicine; source: Mr. Hugh Gilchrist, executor of Dr. McCosh's estate (Toronto); owned and used by Dr. J.T. McCosh of the University of Toronto.
Maker
J.F. Hartz Co., Ltd.
Site Made (City)
Montreal
Site Made (State)
Quebec
Site Made (Country)
Canada
Material
metal: silver
paper: yellow; red
Inscriptions
On paper label: "ETHYL CHLORIDE, B.P. // CAUTION: POISON – INFLAMMABLE // . . . // THE J.F. HARTZ CO., LIMITED // MONTREAL TORONTO // . . . "
Permanent Location
Storage Room 0010
0010-F2-2
Dimension Notes
Length 20.5 cm x Diam. 3.7 cm
Condition Remarks
Some deposits of metal around cap; Note: HIGHLY INFLAMMABLE; STORE UPRIGHT.
Copy Type
Original
Images
Less detail
Dates
1943
1945
circa 1943-1945
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
1982.3.13 a-b
Description
A cardboard box (b) containing a glass cylinder (b) with a spring-loaded valve to keep the ethyl chloride in a liquid state; paper labels on box and cylinder. bottle; box
  1 image  
Accession Number
1982.3.13 a-b
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- substance
Description
A cardboard box (b) containing a glass cylinder (b) with a spring-loaded valve to keep the ethyl chloride in a liquid state; paper labels on box and cylinder. bottle; box
Number Of Parts
2
Part Names
a - cylinder - Size: Length 15.5 cm x Diam. 3.5 cm
b - box
Provenance
Acquired from the Academy of Medicine; source: Dr. R.A. Gordon of Toronto.
Maker
Oxygen Company of Canada Ltd.
Site Made (City)
Montreal
Site Made (State)
Quebec
Site Made (Country)
Canada
Dates
1943
1945
circa 1943-1945
Material
cardboard: dark blue
metal: silver
glass: clear
paper: off-white
ink: black
Inscriptions
Printed on both labels: "ETHYL CHLORIDE, B.P. // [logo] FOR ANAESTHESIA [logo] // 100 GRAMS // OXYGEN COMPANY OF CANADA LIMITED // COMPAGNIE D'OXYGENE DU CANADA, LIMITÉE // 2549 ST. JAMES ST. WEST, MONTEAL, QUE."; box label has "MEDIUM" at top.
Permanent Location
Storage Room 0010
0010-F2-2
Copy Type
Original
Reference Types
Photo
Research Facts
Used by Dr. Gordon (Major) at Basingstoke Neurological and Plastic Surgery Hospital, RCAMC.
Images
Less detail

16 records – page 1 of 2.