Skip header and navigation

Refine By

23 records – page 1 of 3.

anaesthesia chloroform drop bottle

https://mhc.andornot.com/en/permalink/artifact8294
Dates
1900
1930
circa 1900-1930
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
1983.22.16
Description
Empty clear moulded glass dropper bottle, size 2, with removable ground glass stopper with pouring spout.
  1 image  
Accession Number
1983.22.16
Collection
University Health Network - Academy of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- bottle and dropper
Description
Empty clear moulded glass dropper bottle, size 2, with removable ground glass stopper with pouring spout.
Number Of Parts
1
Provenance
Acquired from the Academy of Medicine; source: Dr. W. W. H. Rudd of Toronto.
Maker
T. C. W. Co.
Site Made (Country)
United States of America
Dates
1900
1930
circa 1900-1930
Material
glass: clear
Permanent Location
Storage Room 0010
0010-A3-9 Row E
Dimension Notes
Length 9.0 cm
Copy Type
Original
Research Facts
From the effects of the donor's father, Dr. M. S. K. Rudd, who had a hospital on St. Clair Avenue in Toronto.
Images
Less detail

anaesthesia mask

https://mhc.andornot.com/en/permalink/artifact1293
Dates
1900
1930
circa 1900-1930
Collection
Desmond Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997016003
Description
Metal anaesthesia mask which is hollow and funnel-shaped with an open large end (for the face) and an open cylindrical piece on the other end with two semi-circular wires coming off the end and crossing each other at the top; the outside edge of the large end has three attached hooks with wire ring…
  2 images  
Accession Number
997016003
Collection
Desmond Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask
Description
Metal anaesthesia mask which is hollow and funnel-shaped with an open large end (for the face) and an open cylindrical piece on the other end with two semi-circular wires coming off the end and crossing each other at the top; the outside edge of the large end has three attached hooks with wire rings in them.
Number Of Parts
1
Provenance
Owned by Dr. John Wilbur Desmond.
Maker
Foregger
Dates
1900
1930
circa 1900-1930
Material
metal: dark silver; grey
Inscriptions
The top outside of the mask is stamped, "FOREGGER"
Permanent Location
Storage Room 0010
0010-F2-9
Dimension Notes
Length: 21.0 cm. x Width: 10.5 cm. x Depth: 9.2 cm.
Condition Remarks
The mask arrived dirty and dusty; the outside of the mask shows wear and minor staining, but no corrosion; the metal rings on the outside of the mask show some corrosion; the mask arrived attached to a display board with wire and glue gun adhesive
Copy Type
Original
Images
Less detail

anaesthesia mask

https://mhc.andornot.com/en/permalink/artifact1318
Dates
1900
1930
circa 1900-1930
Collection
Desmond Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997016028 a-b
Description
Anaesthesia mask with connector and pressure valve, which consists of (a) an anaesthesia mask that has a convex teardrop-shaped body with a turned-up edge; the mount of the mask is round and open and attached onto the top; the bottom of the mask is open and shaped to allow the mask to be fitted ove…
  1 image  
Accession Number
997016028 a-b
Collection
Desmond Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask
Description
Anaesthesia mask with connector and pressure valve, which consists of (a) an anaesthesia mask that has a convex teardrop-shaped body with a turned-up edge; the mount of the mask is round and open and attached onto the top; the bottom of the mask is open and shaped to allow the mask to be fitted over a patient's nose and mouth; there is a rounded hook on each side of the mask to enable it to be strapped onto a patient; fitting onto the mount is (b) a connector and pressure valve that is made of hollow cylindrical metal formed into a T-shape; one side of the "T" fits over the mount on the mask; the other side has a round metal pressure valve that can be adjusted with a flat knob at the back that can be loosened and rotated to open or cover five round holes; the bottom of the "T" is round and open.
Number Of Parts
2
Part Names
a - anaesthesia mask - Size: Length 10.2 cm. x Width 9.2 cm. x Depth 7.0 cm.
b - connector and pressure valve - Size: Length 8.2 cm. x Width 6.2 cm. x Depth 3.7 cm.
Provenance
Owned by Dr. John Wilbur Desmond.
Maker
Foregger
Dates
1900
1930
circa 1900-1930
Material
metal: silver/grey
Inscriptions
(a) The bottom of the mask has the word, "FOREGGER" stamped into it; (b) the left side of the connector has the word, "FOREGGER" stamped into it
Permanent Location
Storage Room 0010
0010-F2-9
Condition Remarks
The anaesthesia mask arrived attached to a display board with wire and glue gun adhesive; the metal shows minor wear and staining, but no corrosion
Copy Type
Original
Images
Less detail

anaesthetic inhaler

https://mhc.andornot.com/en/permalink/artifact3466
Dates
1901
1910
circa 1901-1910
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997001194 a-b
Description
Ethyl-chlorid anaesthetic inhaler, which consists of (a) a hollow cylindrical canister with a closed, rounded bottom and a rounded top; the top of the canister has an attached hollow cylindrical tube that has a small round open hole at the top with threading on its inner edges; there is a side holl…
  1 image  
Accession Number
997001194 a-b
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Administration, Intranasal -- instrumentation
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- inhaler
Description
Ethyl-chlorid anaesthetic inhaler, which consists of (a) a hollow cylindrical canister with a closed, rounded bottom and a rounded top; the top of the canister has an attached hollow cylindrical tube that has a small round open hole at the top with threading on its inner edges; there is a side hollow cylindrical tube off from the central tube; the side tube ends with a hollow, bulbous glass attachment with a very narrow cylindrical glass tube at its end; this glass tube has a pinhole opening at the end; a gauge pin (b) fits into the top of the central metal tube; the gauge pin is made of round flat metal with a solid cylindrical piece attached to the bottom; the cylindrical piece has threading on its outer edges.
Number Of Parts
2
Part Names
a - anaesthetic inhaler - Size: Length 14.1 cm x Width 4.1 cm x Depth 1.5 cm
b - gauge pin - Size: Length 2.3 cm x Diam. 1.5 cm
Provenance
Collected by Dr. A.A. Travill for the Queen's University Faculty of Medicine Collection
Maker
The G E Bauer Chemical Co.
Site Made (City)
Cleveland
Site Made (State)
Ohio
Site Made (Country)
United States of America
Dates
1901
1910
circa 1901-1910
Date Remarks
Pat. Feb. 1901, Oct. 1902
Material
metal: silver
glass: clear
Inscriptions
(a) The words, "G E BAUER'S ETHYL-CHLORID C.P. // THE G E BAUER CHEM. CO. CLEVELAND // PAT. FEB 1901, OCT. 1902" are stamped into the metal of the outside edge of the cannister
Permanent Location
Storage Room 0010
0010-F2-2
Condition Remarks
The metal shows minor wear; no staining or corrosion is visible; the glass is complete with no damage
Copy Type
Original
Reference Types
Document
Reference Comments
Previous number #285; Faculty of Medicine Collection 1984 Inventory
Images
Less detail

Bennett's inhaler

https://mhc.andornot.com/en/permalink/artifact4632
Dates
1900
1930
circa 1900-1930
Collection
Dr. Publow Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
994011014
Description
The inhaler is a hollow, metal cylindrical instrument with two hollow metal tubes leading to two plastic anaesthetic delivery cups; at the bottom of the cylinder, there is a metal cap that was once removable; it has gripping lines stamped into the metal and two vertical rectangular slots on opposi…
  1 image  
Accession Number
994011014
Collection
Dr. Publow Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Administration, Inhalation -- instrumentation
MM= Administration Drug, Inhalation -- inhaler
MM= Anesthesia, Inhalation -- inhaler/mask -- inhaler
Description
The inhaler is a hollow, metal cylindrical instrument with two hollow metal tubes leading to two plastic anaesthetic delivery cups; at the bottom of the cylinder, there is a metal cap that was once removable; it has gripping lines stamped into the metal and two vertical rectangular slots on opposite ends of the diameter of the cap; the bottom of the cap is flat; a metal disk caps this cylinder; from the curved top of this disk, two hollow metal tubes extend, curving outwards slightly away from each other, and forwards; these tubes are each capped by a brown plastic applicator; each applicator has a rounded conical shape with a round hole at the top.
Number Of Parts
1
Provenance
Originally owned by Dr. Publow, who practised in Prince Edward County between 1850 and 1900. Given to Dr. M. Williams, head of Otolaryngology at Queen's University.
Site Made (City)
Toronto
Site Made (State)
Ontario
Site Made (Country)
Canada
Dates
1900
1930
circa 1900-1930
Material
metal: silver
plastic: brown
Inscriptions
"HARTZ CO", "DETROIT, CLEVELAND, TORONTO" and "PAT. APPL'D FOR" stamped into the metal cylinder
Permanent Location
Storage Room 0010
0010-F2-1
Dimension Notes
Length 15.0 cm x Width 3.5 cm x Depth 2.8 cm
Condition Remarks
Accretion of a white deposit on nasal applicators at rim of metal attachment; moderate patches of corrosion on metal surface; cap at the bottom of the instrument cannot be removed; #2: tarnished.
Copy Type
Original
Reference Types
Book
Person
Reference Comments
Dr. M. Williams; "Illustrated Catalogue of a Complete Line of Standard Surgical Instruments," by Codman & Shurtleff, 1920, p. 23 (item #1253)
Research Facts
This anaesthetic inhaler was filled with cotton batting saturated with ether or chloroform; the anaesthetic was delivered to the patient by inserting the delivery cups into the nostrils. Dr. Williams identified this item as a "nasal douche."
Exhibit History
On display at Hotel Dieu Hospital circa 1983-1993; the item was mounted on an acidic board with copper-covered wires to secure it.
Images
Less detail

Bennett's inhaler

https://mhc.andornot.com/en/permalink/artifact3298
Dates
1900
1930
circa 1900-1930
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997001116 a-d
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (…
  1 image  
Accession Number
997001116 a-d
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Administration, Intranasal -- instrumentation
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- inhaler
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (c,d) fit onto and over the ends of the tubes; the tips are both conical in shape with a hollow centre
Number Of Parts
4
Part Names
a - inhaler - Size: Length 13.4 cm x Width 2.9 cm x Depth 2.0 cm
b - cap - Size: Length 1.8 cm x Diam. 2.3 cm
c - tip - Size: Length 1.5 cm x Diam. 1.5 cm
d - tip - Size: Length 1.5 cm x Diam. 1.5 cm
Provenance
Originally owned by Dr. F. J. O'Connor; collected by Dr. A. A. Travill for the Queen's University Faculty of Medicine Collection
Maker
The J. F. Hartz Co.
Site Made (City)
Toronto
Site Made (State)
Ontario
Site Made (Country)
Canada
Dates
1900
1930
circa 1900-1930
Material
metal: silver
plastic: black
Inscriptions
(a) The outside of the cannister has the words, "HARTZ CO. // DETROIT - CLEVELAND // TORONTO // PAT. APPL'D FOR" stamped into the metal
Permanent Location
Storage Room 0010
0010-F2-1
Condition Remarks
The metal shows wear, but no corrosion is visible; the bakelite tips are complete and undamaged; #2: returned in same condition.
Copy Type
Original
Reference Types
Book
Document
Reference Comments
Previous number #182; Faculty of Medicine Collection 1984 Inventory; "Surgical Instruments," The Kny-Scheerer Co., 1915, p. 2001 (item B/-22); "Illustrated Catalog of A Complete Line of Standard Surgical Instruments," by Codman & Shurtleff Inc., c. 1920, p. 23 (item 1253)
Exhibit History
May 24 - Sept. 13, 2001: Agnes Etherington Art Centre Museopathy exhibit; Bracken Library Exhibit "Boning Up on Anatomy"; Sept 9, 2002-Sept. 29, 2003
Images
Less detail

Bennett's inhaler

https://mhc.andornot.com/en/permalink/artifact3299
Dates
1900
1930
circa 1900-1930
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997001117 a-d
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (…
  1 image  
Accession Number
997001117 a-d
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Administration, Intranasal -- instrumentation
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- inhaler
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (c,d) fit onto and over the ends of the tubes; the tips are both conical in shape with a hollow centre
Number Of Parts
4
Part Names
a - inhaler - Size: Length 13.4 cm x Width 2.8 cm x Depth 2.0 cm
b - cap - Size: Length 1.8 cm x Diam. 2.3 cm
c - tip - Size: Length 1.5 cm x Diam. 1.5 cm
d - tip - Size: Length 1.5 cm x Diam. 1.5 cm
Provenance
Originally owned by Dr. H.C. Mabee; collected by Dr. A.A. Travill for the Queen's University Faculty of Medicine Collection
Maker
The J.F. Hartz Co.
Site Made (City)
Toronto
Site Made (State)
Ontario
Site Made (Country)
Canada
Dates
1900
1930
circa 1900-1930
Material
metal: silver
plastic: black
Inscriptions
(a) The outside of the cannister has the words, "HARTZ CO. // DETROIT - CLEVELAND // TORONTO // PAT. APPL'D FOR" stamped into the metal
Permanent Location
Storage Room 0010
0010-F2-1
Condition Remarks
The metal shows wear, but no corrosion is visible; the bakelite tips are complete and undamaged, except for a very small chip missing from the outer tip edge of (a)
Copy Type
Original
Reference Types
Book
Document
Other
JPG
Reference Comments
Previous number #183; Faculty of Medicine Collection 1984 Inventory; "Surgical Instruments," The Kny-Scheerer Co., 1915, p. 2001 (item B/-22); "Illustrated Catalog of A Complete Line of Standard Surgical Instruments," by Codman & Shurtleff Inc., c. 1920, p. 23 (item 1253)
Images
Less detail

Bennett's inhaler

https://mhc.andornot.com/en/permalink/artifact3300
Dates
1900
1930
circa 1900-1930
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
Accession Number
997001118 a-d
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (…
  1 image  
Accession Number
997001118 a-d
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Anaesthesia
MeSH Heading
Administration, Intranasal -- instrumentation
Anesthesiology, instrumentation
MM= Anesthesia, Inhalation -- inhaler/mask -- inhaler
Description
Bennett's anaesthetic inhaler, which consists of a hollow cylindrical metal canister with two attached lengths of hollow metal tubing that has open round ends; the other end of the canister is round and open; a round metal cap (b) fits onto and over the open end of the canister; two bakelite tips (c,d) fit onto and over the ends of the tubes; the tips are both conical in shape with a hollow centre
Number Of Parts
4
Part Names
a - inhaler - Size: Length 13.5 cm x Width 2.5 cm x Depth 2.0 cm
b - cap - Size: Length 1.9 cm x Diam. 2.2 cm
c - tip - Size: Length 1.5 cm x Diam. 1.5 cm
d - tip - Size: Length 1.5 cm x Diam. 1.5 cm
Provenance
Collected by Dr. A. A. Travill for the Queen's University Faculty of Medicine Collection
Dates
1900
1930
circa 1900-1930
Material
metal: silver
plastic: black
Inscriptions
(a) The outside of the cannister has the words, "// PAT. APPL'D FOR" stamped into the metal
Permanent Location
Storage Room 0010
0010-F2-1
Condition Remarks
The metal shows wear, but no corrosion is visible; the bakelite tips are complete and undamaged
Copy Type
Original
Reference Types
Book
Document
Other
JPG
Reference Comments
Previous number #184; Faculty of Medicine Collection 1984 Inventory; "Surgical Instruments," The Kny-Scheerer Co., 1915, p. 2001 (item B/-22); "Illustrated Catalog of a Complete Line of Standard Surgical Instruments," by Codman & Shurtleff Inc., c. 1920, p. 23 (item 1253)
Images
Less detail
Dates
1900
1930
circa 1900-1930
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Urology
Accession Number
997001774
  1 image  
Accession Number
997001774
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Urology
MeSH Heading
Urinary Catheterization -- instrumentation
Urology -- instrumentation
Provenance
Collected by Dr. A. A. Travill for Queen's Faculty of Medicine.
Dates
1900
1930
circa 1900-1930
Permanent Location
Storage Room 0010
0010-C1-2
Condition Remarks
#2: rubber is very stiff
Copy Type
Original
Images
Less detail
Dates
1900
1930
circa 1900-1930
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Urology
Accession Number
997002350
  1 image  
Accession Number
997002350
Collection
Queen's University Faculty of Medicine Collection
Category
Diagnostic & Treatment Artifacts
Classification
Urology
MeSH Heading
Urinary Catheterization -- instrumentation
Urology -- instrumentation
Provenance
Collected by Dr. A. A. Travill for Queen's Faculty of Medicine.
Dates
1900
1930
circa 1900-1930
Copy Type
Original
Images
Less detail

23 records – page 1 of 3.