Skip header and navigation

Refine By

   MORE

57 records – page 1 of 6.

Mirena demonstration model

https://mhc.andornot.com/en/permalink/artifact9749
Dates
2000
circa 2000
Collection
Dr. Paul MacKenzie Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
Accession Number
003003003
Description
Plastic model of a human uterus used to demonstrate the proper insertion technique for a Mirena levonorgestrel-releasing intrauterine system; the model has a flat, elongated semi-oval base with a foam piece attached to the bottom; the top of the model is attached to the base at a 45° angle; the top…
  2 images  
Accession Number
003003003
Collection
Dr. Paul MacKenzie Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
MeSH Heading
Models, Anatomic
Gynecology -- models
Uterus -- models
Vagina -- models
MM= Teaching Materials -- models
Description
Plastic model of a human uterus used to demonstrate the proper insertion technique for a Mirena levonorgestrel-releasing intrauterine system; the model has a flat, elongated semi-oval base with a foam piece attached to the bottom; the top of the model is attached to the base at a 45° angle; the top of the model shows a frontal section of a uterus and vagina; the top of the model is slightly curved and is in the shape of a uterus and vagina; the uterus has a flat, clear plastic cover attached over it; the model is painted to indicate the inside of the uterus and vagina.
Number Of Parts
1
Provenance
Owned and used by Dr. Paul MacKenzie at Kingston General Hospital.
Dates
2000
circa 2000
Material
foam: white
plastic: clear; white
paint: pink; grey; blue
Inscriptions
The front of the model has the word, "Mirena" on it, as well as the company's logo.
Permanent Location
Storage Room 0010
0010-D8-12
Dimension Notes
Length 13.1cm x Width 6.5 cm x Depth 8.1 cm
Condition Remarks
The model shows minor scratches only; the model is complete with no cracks of staining.
Copy Type
Original
Reference Types
Person
Other
JPG
Reference Comments
Dr. Robert Reid; Mirena brochure (in Contraceptives File); designed to demonstrate 003.003.001 and .002; CD #2.
Research Facts
This model used to demonstrate the proper insertion technique for the Mirena levonorgestrel-releasing intrauterine system.
Images
Less detail

Mirena demonstration model

https://mhc.andornot.com/en/permalink/artifact9750
Dates
2000
circa 2000
Collection
Dr. Paul MacKenzie Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
Accession Number
003003004 a-b
Description
Plastic model of a human uterus used to demonstrate the proper insertion technique for a Mirena levonorgestrel-releasing intrauterine system; the model has a flat, round flexible plastic base with the shape of the frontal section of a uterus and vagina cut into it; the edges of the base have a roun…
  2 images  
Accession Number
003003004 a-b
Collection
Dr. Paul MacKenzie Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
MeSH Heading
Models, Anatomic
Gynecology -- models
Uterus -- models
Vagina -- models
MM= Teaching Materials -- models
Description
Plastic model of a human uterus used to demonstrate the proper insertion technique for a Mirena levonorgestrel-releasing intrauterine system; the model has a flat, round flexible plastic base with the shape of the frontal section of a uterus and vagina cut into it; the edges of the base have a round, trough cut into them that allows for (b) a cover to be put in; the cover is made of clear, rigid plastic with a lip; the top of the cover has the Mirena logo painted on it.
Number Of Parts
2
Part Names
a - Mirena demonstration model - Size: Depth 1.1 cm x Diam. 8.5 cm
b - plastic cover - Size: Depth 0.9 cm x Diam. 7.7 cm
Provenance
Owned and used by Dr. Paul MacKenzie at Kingston General Hospital.
Dates
2000
circa 2000
Material
plastic: clear; pink
paint: blue
Inscriptions
(a) None; (b) the top of the cover has the Mirena logo on it in blue paint.
Permanent Location
Storage Room 0010
0010-A4-4
Condition Remarks
#1: The model shows minor wear only; the base is slightly stained on the bottom and the cover has very minor scratches; the model is complete with no cracks.
Copy Type
Original
Reference Types
Person
Other
JPG
Reference Comments
Dr. Robert Reid; Mirena brochure (in Contraceptives File); designed to demonstrate 003.003.001 and .002; CD #2.
Research Facts
This model used to demonstrate the proper insertion technique for the Mirena levonorgestrel-releasing intrauterine system.
Images
Less detail

Nova T intrauterine device and demonstration model

https://mhc.andornot.com/en/permalink/artifact9794
Dates
1979
circa 1979
Collection
Dr. Paul MacKenzie Collection
Category
Patient Care Artifacts
Classification
Patient Care
Accession Number
003003044 a-c
Description
Nova T intrauterine device (a), which is a piece of solid cylindrical polyethylene formed into a "T" shape with thin copper wire wrapped tightly around the length of the main shaft; the upper horizontal section has a V-shaped notch at the centre, flat tops and bulbous tips at both ends; the bottom …
  2 images  
Accession Number
003003044 a-c
Collection
Dr. Paul MacKenzie Collection
Category
Patient Care Artifacts
Classification
Patient Care
MeSH Heading
Contraceptive Devices, Female
Models, Anatomic
Gynecology -- models
Uterus -- models
Vagina -- models
MM= Teaching Materials -- models
Description
Nova T intrauterine device (a), which is a piece of solid cylindrical polyethylene formed into a "T" shape with thin copper wire wrapped tightly around the length of the main shaft; the upper horizontal section has a V-shaped notch at the centre, flat tops and bulbous tips at both ends; the bottom of the main shaft has a loop with an elongated oval opening that allows the attachment of a nylon string; the IUD fits into a demonstration model, which has a rectangular base (b) made of latex with an impression of the frontal section of a uterus and vagina; most of the top and all of the bottom of the base are covered by a clear hard plastic cover (c) which is open on three sides.
Number Of Parts
3
Part Names
a - Nova T IUD - Size: Length 3.2 cm x Width 3.1 cm x Depth 0.3 cm
b - model base - Size: Length 9.3 cm x Width 7.2 cm x Depth 1.0 cm
c - model cover - Size: Length 9.5 cm x Width 7.3 cm x Depth 1.5 cm
Provenance
Owned and used by Dr. Paul MacKenzie at Kingston General Hospital.
Dates
1979
circa 1979
Date Remarks
This type of IUD first marketed in 1979.
Material
metal: red
plastic: white, clear
fabric: grey
latex: pink
Inscriptions
None
Permanent Location
Storage Room 0010
0010-A4-4
Condition Remarks
#1: The IUD is unused and undamaged; the copper wire is untarnished and shows no corrosion; it appears to never have been in a patient, as the nylon string is long; the polyethylene shows no wear or staining; the latex base of the model is complete, unstained and undamaged; the plastic model cover shows minor wear only; there are no cracks or missing sections.
Copy Type
Original
Reference Types
Person
Document
JPG
Reference Comments
Dr. Robert Reid; Dr. Paul MacKenzie; "Population Reports," Series B, No. 5, March 1988: "Intrauterine Devices," p. 16 (see attached photocopy); CD #2
Research Facts
This type of IUD was first marketed in 1979 and has been used up until the present (2003); the polyethylene has barium sulfate added to it for visibility on X-Rays; the model was used to demonstrate the proper insertion technique for a Nova T IUD.
Exhibit History
History of Contraception exhibit, Fraser-Armstrong 5, Kingston General Hospital; March 2004 - Case #1
Images
Less detail

wax model, adenomyoma of uterus

https://mhc.andornot.com/en/permalink/artifact312
Dates
1940
circa 1940
Collection
Dr. Robertson / Marjorie Winslow Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
Accession Number
996003032 a-c
Description
Wax models (moulage) of adenomyoma of the uterus and a follicular cyst and a thick-walled corpus luteum cyst in the ovary on the left side; the right side shows a normal fallopian tube and ovary; the models are made of oil-painted beeswax with talc, built up on a plywood base with gauze and wire fo…
  5 images  
Accession Number
996003032 a-c
Author
Marjorie Winslow
Collection
Dr. Robertson / Marjorie Winslow Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
MeSH Heading
Adenomyoma -- models
Uterus -- models
Uterine Diseases -- models
Follicular Cyst -- models
Ovarian Cysts -- models
Ovary -- models
Gynecology -- models
Models, Anatomic
MM= Teaching Materials -- models
Description
Wax models (moulage) of adenomyoma of the uterus and a follicular cyst and a thick-walled corpus
luteum cyst in the ovary on the left side; the right side shows a normal fallopian tube and ovary;
the models are made of oil-painted beeswax with talc, built up on a plywood base with gauze and
wire for extra support; (b,c) are made of wax only; (a) the model shows a uterus split open to
show a lesion of the thickening of the uterine endometrium walls; red spots indicate hemorrhaging;
the left side of the model shows an ovary enlarged and distended with a follicular cyst and
a corpus luteal cyst; the right side of the model shows a normal fallopian tube and ovary; (b)
shows a cross-section of the follicular cyst and the corpus luteal cyst seen in (a); (c) shows
a cross-section of the normal fallopian tube and ovary seen in (a); the red spot in the ovary
likely indicates a small normal follicle rupture which has not completely healed; the models are
painted to depict true colour
Number Of Parts
3
Part Names
a - model, anatomical: adenomyoma of uterus - Size: Length 19.8 cm. x Width 10.8 cm. x Depth 4.2 cm.
b - model, anatomical: cross-section of ovarian follicular cyst - Size: Length 3.4 cm. x Width 2.9 cm. x Depth 1.2 cm.
c - model, anatomical: cross-section of thick-walled corpus luteum cyst - Size: Length 6.8 cm. x Width 5.0 cm. x Depth 1.1 cm.
Provenance
Models made by Marjorie Winslow; they were commissioned by Dr. Robertson, who also helped with
anatomical details
Maker
Marjorie Winslow
Site Made (City)
Kingston
Site Made (State)
Ontario
Site Made (Country)
Canada
Dates
1940
circa 1940
Date Remarks
Models made between 1940-1945
Material
beeswax with talc: cream
oil paints: flesh tone; red; blue; yellow
wood: beige
fabric: white
metal: dark grey
Inscriptions
(a) the number "106" is written in red on the bottom of the plywood support
Permanent Location
Storage Room 0010
0010-G2-Box 4
Condition Remarks
(a) There are no chips or breaks in the wax; there is a small crack in the front central part;
the surface is undamaged; (b,c) the models show no chips, cracks or breaks in the wax; the surfaces
are undamaged
Copy Type
Original
Reference Types
Person
Document
JPG
Reference Comments
Model subject identified by Dr. J.A. Low; model-making techniques described by Marjorie Winslow
in an oral interview (transcribed); CD #9
Research Facts
See transcribed oral interview; the cause of adenomyoma is unsure; the fallopian tubes and ovaries
indicate that the patient is post-menopausal
Images
Less detail

wax model, bicornute uterus

https://mhc.andornot.com/en/permalink/artifact311
Dates
1940
circa 1940
Collection
Dr. Robertson / Marjorie Winslow Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
Accession Number
996003031 a-b
Description
Wax models (moulage) of a bicornute uterus; the models are made of oil-painted beeswax with talc, built up on plywood supports; the models show a saddle-shaped uterus (a) closed and (b) opened to show the two uterine cavities; the model is painted to depict true colour
  4 images  
Accession Number
996003031 a-b
Author
Marjorie Winslow
Collection
Dr. Robertson / Marjorie Winslow Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
MeSH Heading
Uterus -- abnormalities -- models
Uterus -- models
Gynecology -- models
Models, Anatomic
MM= Teaching Materials -- models
Description
Wax models (moulage) of a bicornute uterus; the models are made of oil-painted beeswax with talc,
built up on plywood supports; the models show a saddle-shaped uterus (a) closed and (b) opened to
show the two uterine cavities; the model is painted to depict true colour
Number Of Parts
2
Part Names
a - model, anatomical: bicornuate uterus, closed - Size: Length 8.2 cm. x Width 6.3 cm. x Depth 3.5 cm.
b - model, anatomical: bicornuate uterus, open - Size: Length 8.3 cm. x Width 6.7 cm. x Depth 3.7 cm.
Provenance
Models made by Marjorie Winslow; they were commissioned by Dr. Robertson, who also helped with
anatomical details
Maker
Marjorie Winslow
Site Made (City)
Kingston
Site Made (State)
Ontario
Site Made (Country)
Canada
Dates
1940
circa 1940
Date Remarks
Models made between 1940-1945
Material
beeswax with talc: cream
oil paints: flesh tone; red
wood: beige
Inscriptions
(a) the number "20a" is written in red on the bottom of the plywood support; (b) the number "20b"
is written in red on the bottom of the plywood support
Permanent Location
Storage Room 0010
0010-G2-Box 4
Condition Remarks
(a) There are no chips, cracks or breaks in the wax; there is a very minor impact mark which has
marred a small spot on the central right half of the model; the surface is otherwise undamaged;
(b) there are no chips, cracks or breaks in the wax; there is a very minor impact mark which has
marred two small spots on the outer right cut in the uterus; the surface is otherwise undamaged;
the models were used for a demonstration then stored in a closet on Victory 4 until picked up by
the Museum on May 24 1996
Copy Type
Original
Reference Types
Person
Book
Document
JPG
Reference Comments
Model subject identified by Dr. J.A. Low; model-making techniques described by Marjorie Winslow
in an oral interview (transcribed); "Gynaecology For Students and Practitioners" by Thomas Watts
Eden and Cuthbert Lockyer, p. 160; CD #9
Research Facts
See transcribed oral interview; uterus bicornis unicollis: the cavity of the uterine body is
double; that of athe cervix and vagina is single; complete fusion has occurred in the lower half
of the uterus; patients with this condition are likely to have menstrual problems as well as problems
wtih pregnancy -- multiple abortions
Images
Less detail

wax model, bilateral pelvic inflammatory disease

https://mhc.andornot.com/en/permalink/artifact313
Dates
1940
circa 1940
Collection
Dr. Robertson / Marjorie Winslow Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
Accession Number
996003033
Description
Wax model (moulage) of bilateral pelvic inflammatory disease; the model is made of oil-painted beeswax with talc, built up on a plywood support; the model shows a uterus and cervix with fallopian tubes and ovaries at both sides; both fallopian tubes are sealed off, full of blood and distorted due t…
  5 images  
Accession Number
996003033
Author
Marjorie Winslow
Collection
Dr. Robertson / Marjorie Winslow Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
MeSH Heading
Adnexitis -- models
Salpingitis -- models
Ovary -- models
Cervix Uteri -- models
Fallopian Tubes -- models
Uterus -- models
Uterine Diseases -- models
Gynecology -- models
Models, Anatomic
MM= Teaching Materials -- models
Description
Wax model (moulage) of bilateral pelvic inflammatory disease; the model is made of oil-painted
beeswax with talc, built up on a plywood support; the model shows a uterus and cervix with fallopian
tubes and ovaries at both sides; both fallopian tubes are sealed off, full of blood and
distorted due to bilateral pelvic inflammatory disease and salpingitis; the model is painted to
depict true colour
Number Of Parts
1
Provenance
Models made by Marjorie Winslow; they were commissioned by Dr. Robertson, who also helped with
anatomical details
Maker
Marjorie Winslow
Site Made (City)
Kingston
Site Made (State)
Ontario
Site Made (Country)
Canada
Dates
1940
circa 1940
Date Remarks
Models made between 1940-1945
Material
beeswax with talc: cream
oil paints: flesh tone; red; blue
wood: beige
Inscriptions
The number "30" is written in red on the bottom of the plywood support
Permanent Location
Storage Room 0010
0010-G2-Box 4
Dimension Notes
Length: 15.8 cm. x Width: 8.4 cm. x Depth: 3.7 cm.
Condition Remarks
The model shows no chips or breaks in the wax; there is a small crack on the bottom near the plywood
support; the surface is undamaged
Copy Type
Original
Reference Types
Person
Document
JPG
Reference Comments
Model subject identified by Dr. J.A. Low; model-making techniques described by Marjorie Winslow
in an oral interview (transcribed); CD #9
Research Facts
See transcribed oral interview
Images
Less detail

wax model, infantile uterus

https://mhc.andornot.com/en/permalink/artifact295
Dates
1940
circa 1940
Collection
Dr. Robertson / Marjorie Winslow Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
Accession Number
996003015
Description
Wax model (moulage) of an infantile uterus with small fallopian tubes and ovaries; the model is made of oil-painted beeswax with talc, built up on a small plywood base; the model shows a small uterus with fallopian tubes which are dilated and distended -- indicating salpingitis due to infection; th…
  3 images  
Accession Number
996003015
Author
Marjorie Winslow
Collection
Dr. Robertson / Marjorie Winslow Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
MeSH Heading
Uterus -- models
Uterine Diseases -- models
Ovary -- models
Gynecology -- models
Models, Anatomic
MM= Teaching Materials -- models
Description
Wax model (moulage) of an infantile uterus with small fallopian tubes and ovaries; the model is
made of oil-painted beeswax with talc, built up on a small plywood base; the model shows a small
uterus with fallopian tubes which are dilated and distended -- indicating salpingitis due to infection;
the ovaries appear to be reasonably normal; a red spot at the lower left side of the
uterus could show a possible perforation of the uterus as a result of an induced abortion; the
model is painted to depict true colour
Number Of Parts
1
Provenance
Models made by Marjorie Winslow; they were commissioned by Dr. Robertson, who also helped with
anatomical details
Maker
Marjorie Winslow
Site Made (City)
Kingston
Site Made (State)
Ontario
Site Made (Country)
Canada
Dates
1940
circa 1940
Date Remarks
Models made between 1940-1945
Material
beeswax with talc: cream
oil paints: flesh tone; red; dark grey
wood: beige
metal: dark grey
Inscriptions
The number "28" is written in red on the bottom of the board the model was originally attached to
Permanent Location
Storage Room 0010
0010-G1-Box 2
Dimension Notes
Length: 7.9 cm. x Width: 4.4 cm. x Depth: 3.8 cm.
Condition Remarks
The model shows no cracks, chips or breaks in the wax; the surface is undamaged; the plywood support
has cracked and reveals a metal nail sticking out
Copy Type
Original
Reference Types
Person
Document
JPG
Reference Comments
Model subject identified by Dr. J.A. Low; model-making techniques described by Marjorie Winslow
in an oral interview (transcribed); CD #9
Research Facts
See transcribed oral interview; salpingitis is the inflammation of the fallopian tubes
Images
Less detail

wax model, infantile uterus

https://mhc.andornot.com/en/permalink/artifact314
Dates
1940
circa 1940
Collection
Dr. Robertson / Marjorie Winslow Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
Accession Number
996003034
Description
Wax model (moulage) of an infantile uterus with a large cervix; the model is made of oil-painted beeswax with talc, built up on a plywood support; the model shows an infantile uterus (likely that of a child) and normal cervix; the model is painted to depict true colour
  3 images  
Accession Number
996003034
Author
Marjorie Winslow
Collection
Dr. Robertson / Marjorie Winslow Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
MeSH Heading
Uterus -- models
Cervix Uteri -- models
Gynecology -- models
Models, Anatomic
MM= Teaching Materials -- models
Description
Wax model (moulage) of an infantile uterus with a large cervix; the model is made of oil-painted
beeswax with talc, built up on a plywood support; the model shows an infantile uterus (likely
that of a child) and normal cervix; the model is painted to depict true colour
Number Of Parts
1
Provenance
Models made by Marjorie Winslow; they were commissioned by Dr. Robertson, who also helped with
anatomical details
Maker
Marjorie Winslow
Site Made (City)
Kingston
Site Made (State)
Ontario
Site Made (Country)
Canada
Dates
1940
circa 1940
Date Remarks
Models made between 1940-1945
Material
beeswax with talc: cream
oil paints: flesh tone; red
wood: beige
Inscriptions
The number "19" is written in red on the bottom of the plywood support
Permanent Location
Storage Room 0010
0010-G2-Box 4
Dimension Notes
Length: 5.9 cm. x Width: 3.0 cm. x Depth: 2.5 cm.
Condition Remarks
The model shows no chips, cracks or breaks in the wax; the surface shows a minor flaw on the lower
left side just above the cervix
Copy Type
Original
Reference Types
Person
Document
JPG
Reference Comments
Model subject identified by Dr. J.A. Low; model-making techniques described by Marjorie Winslow
in an oral interview (transcribed); CD #9
Research Facts
See transcribed oral interview
Images
Less detail

wax model, normal parous uterus

https://mhc.andornot.com/en/permalink/artifact298
Dates
1940
circa 1940
Collection
Dr. Robertson / Marjorie Winslow Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
Accession Number
996003018
Description
Wax model (moulage) of a normal parous uterus; the model is made of oil-painted beeswax with talc, built up on a plywood support; there is a thick metal wire leading from the uterus to the fallopian tubes and ovaries built into the wax for added support; the uterus is the normal shape and the cervi…
  3 images  
Accession Number
996003018
Author
Marjorie Winslow
Collection
Dr. Robertson / Marjorie Winslow Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
MeSH Heading
Uterus -- models
Cervix Uteri -- models
Gynecology -- models
Models, Anatomic
MM= Teaching Materials -- models
Description
Wax model (moulage) of a normal parous uterus; the model is made of oil-painted beeswax with talc,
built up on a plywood support; there is a thick metal wire leading from the uterus to the fallopian
tubes and ovaries built into the wax for added support; the uterus is the normal shape and the
cervix and fallopian tubes are normal; a follicular cyst or parovarian cyst can be seen at the
left; the model is painted to depict true colours
Number Of Parts
1
Provenance
Models made by Marjorie Winslow; they were commissioned by Dr. Robertson, who also helped with
anatomical details
Maker
Marjorie Winslow
Site Made (City)
Kingston
Site Made (State)
Ontario
Site Made (Country)
Canada
Dates
1940
circa 1940
Date Remarks
Models made between 1940-1945
Material
beeswax with talc: cream
oil paints: flesh tone; red; yellow
wood: beige
wire: dark grey
Inscriptions
The number "21" is written in red on the bottom of the plywood support
Permanent Location
Storage Room 0010
0010-G1-Box 3
Dimension Notes
Length: 16.1 cm. x Width: 10.5 cm. x Depth: 3.9 cm.
Condition Remarks
The model shows no chips or breaks in the wax; there is a crack across the right fallopian tube
which should be repaired at some point as it is very fragile; the surface is undamaged
Copy Type
Original
Reference Types
Person
Document
JPG
Reference Comments
Model subject identified by Dr. J.A. Low; model-making techniques described by Marjorie Winslow
in an oral interview (transcribed); CD #8
Research Facts
See transcribed oral interview; a follicular cyst or a parovarian cyst is not dangerous
Images
Less detail

wax model, normal uterus

https://mhc.andornot.com/en/permalink/artifact316
Dates
1940
circa 1940
Collection
Dr. Robertson / Marjorie Winslow Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
Accession Number
996003036
Description
Wax model (moulage) of a cross section of a normal uterus; the model is made of oil-painted beeswax with talc, built up on a plywood support; the model shows a uterine cross-section; the cervical canal is visible; the model is painted to depict true colour
  2 images  
Accession Number
996003036
Author
Marjorie Winslow
Collection
Dr. Robertson / Marjorie Winslow Collection
Category
Basic Science Artifacts
Classification
Basic Science, Anatomy
MeSH Heading
Uterus -- models
Gynecology -- models
Models, Anatomic
MM= Teaching Materials -- models
Description
Wax model (moulage) of a cross section of a normal uterus; the model is made of oil-painted beeswax
with talc, built up on a plywood support; the model shows a uterine cross-section; the cervical
canal is visible; the model is painted to depict true colour
Number Of Parts
1
Provenance
Models made by Marjorie Winslow; they were commissioned by Dr. Robertson, who also helped with
anatomical details
Maker
Marjorie Winslow
Site Made (City)
Kingston
Site Made (State)
Ontario
Site Made (Country)
Canada
Dates
1940
circa 1940
Date Remarks
Models made between 1940-1945
Material
beeswax with talc: cream
oil paints: flesh tone; red
wood: beige
Inscriptions
The number "26" is written in red on the bottom of the plywood support; this number was more
legible on the wooden board it was originally attached to
Permanent Location
Storage Room 0010
0010-G2-Box 4
Dimension Notes
Length: 7.4 cm. x Width: 4.5 cm. x Depth: 1.6 cm.
Condition Remarks
The model shows no chips, cracks or breaks in the wax; the surface is undamaged
Copy Type
Original
Reference Types
Person
Document
JPG
Reference Comments
Model subject identified by Dr. J.A. Low; model-making techniques described by Marjorie Winslow in an oral interview (transcribed); CD #9
Research Facts
See transcribed oral interview; a tumour of this type could be either benign or malignant; it
would have to be tested
Images
Less detail

57 records – page 1 of 6.